Launch our Cool Free App!

Get $3 Off 1st Order.

Launch App
3D Printer Touch LCD Screen MKS_GEN Controller Full Color 3.2 Inch MSK TFT32 Touch Screen LCD Display
3D Printer Touch LCD Screen MKS_GEN Controller Full Color 3.2 Inch MSK TFT32 Touch Screen LCD Display
3D Printer Touch LCD Screen MKS_GEN Controller Full Color 3.2 Inch MSK TFT32 Touch Screen LCD Display
1/1
$84.70
84.7

3D Printer Touch LCD Screen MKS_GEN Controller Full Color 3.2 Inch MSK TFT32 Touch Screen LCD Display - Black

Coupon:

Promotion:

Support COD payment

Warehouse & Fee

Select
CN-099:Ship between: Dec 03 - Dec 05

Product Options

Select
Black
Visit Store

Discussion

View More
Why not extruding enough plastic?

1. Incorrect filament diameter;

2. Increase the extrusion multiplier.

The solution to under-extrusion (not extruding enough plastic)

Description

1.Bed Leveling

Auto Leveling
After the machine assembles with a bed leveling controller, then run leveling on TFT interface.
#The command of auto leveling (G29 is available for Marlin.
While G32 is for Repetier and Smoothieware)
>cfg_auto_leveling_cmd:G28;G29;

Manual Leveling
Manual leveling is good for MB,i3 etc machines. It is available to set 3,4,5 point .
#The point number of manual leveling:(3,4,5 point available)
>cfg_point_number:4



2.Filament Replace
It is easy to replace the filament when it runs out.
You are able to set temperature and the speed of filament in-out on config.
As following:
#the speed of filament replacing(mm/min)
>cfg_filament_change_speed:1200

#the length of filament replacing(mm)
>cfg_filament_change_step:5

#the min temperature of filament replacing
>cfg_filament_limit_temperature:175



3.Print from Breakpoint
TFT has a one of the excellent features is able to print from Breakpoint.
Below is the way to do it.
Firstly, set target temperature of extruder and heated bed, and then preheat.
Secondly, when preheat ready, go home .(Notice: if power off happens during operating printing from breakpoint, please must home .)
Thirdly, move extruder to the breakpoint which is available to set allowable error.
#Breakpoints continued playing Z-axis error setting
>cfg_breakpoint_z_error:0.2
Fourth, click set, and then click Continue(Means Print from Breakpoint).
After that, choose the file you want.
(If you pause the printing, and turn the printer off,
then it will resume to print from the pause point after power on.)



4.Filament Outage Detecting
Connect detecting switch to PB1 of TFT.
Set configuration to trigger low level or high level available.
#the level signal of outage detection module PB1(low level:0; high level:1)
>cfg_PB0_PB1_Level:1



5. Auto off after Print Finishes
Enable this function on config,and take concerted with PWC switch.
#whether set machine auto-off after print finishes(auto-off:1; NO:0)
>cfg_print_finish_close_Machine:0

Specification

Custom

General

Materials: Plastics
Suitable for: Mainboard Control
Type: DIY Accessories

Dimensions and Weight

Package weight: 0.1780 kg

Package Contents

Package Contents: 1 x3d touch screen printer

3D Printer Touch LCD Screen MKS_GEN Controller Full Color 3.2 Inch MSK TFT32 Touch Screen LCD Display- Black

3D Printer Touch LCD Screen MKS_GEN Controller Full Color 3.2 Inch MSK TFT32 Touch Screen LCD Display- Black

3D Printer Touch LCD Screen MKS_GEN Controller Full Color 3.2 Inch MSK TFT32 Touch Screen LCD Display- Black

3D Printer Touch LCD Screen MKS_GEN Controller Full Color 3.2 Inch MSK TFT32 Touch Screen LCD Display- Black



View More 

Recommended Products

Sponsored Products

New Member's Bonus: $10 Coupon
$84.70

3D Printer Touch LCD Screen MKS_GEN Controller Full Color 3.2 Inch MSK TFT32 Touch Screen LCD Display

Color

Quantity - +
installments: choose
loading...
loading...
cancel
loading...
loading...
loading...

Ship to

Reviews

0 *****
  • 0
  • 0
  • 0
  • 0
  • 0
  • All ( 0 )
  • ( 0 )
  • ( 0 )
View More
View More