Open our Cool Free APP!

Enjoy APP-Exclusive Deals.

Open APP
1/1

Practical 6 - 36V Auto Leveling Sensor for 3D Printer

$14.30
Save an extra 0 for using for app

warehouse

Ship between: May 28 - May 31
China
selected
BLACK
Visit Store

Customer Reviews

Andre
Feb/09/2017 08:40:33
Pros:
I can confirm this sensor will work with the Anet A8 3D printer. The sensor does need a different mount but that can be found online and printed easily. You will need to swap the blue and brown wire. A firmware upgrade will also be required but once completed the printer will auto level. Over all I'm pleased with the purchase and shipping time required to arrive.
Cons:
You need to swap the brown and blue wires. 30 seconds of work.
B. Modelling
Sep/24/2017 20:53:46
Pros:
Diese Ergänzung zum 3D-Drucker ANET A8 ist uneingeschränkt zu empfehlen. Dieser Sensor macht den 3D-Druck so easy wie Farbdrucke mit einem Normalen Drucker. Einmal kallibriert geingt so gut wie jeder Druck auf anhieb. So macht 3D-Druck einfach nur freude. Bevor ich diesen Sensor hatte mußte ich nach jedemausschalten des Druckers diesen neu kallibrieren, das über nimmt nun der Sensor. Einschalten druck starten und warten bis das Bauteil fertig ist. Nie war 3D-Druck so einfach.
Cons:
Ich kenne keine, man sote nur darauf achten will man eine Glasscheibe als Druckbett nutzen dann funktioniert dieser Sensor nicht der Schaltabstand ist zu gering um durch die Scheibe das Metallbett zu erkennen und so würde der Extruder auf der Galsscheibe aufsetzen.
Yev
May/11/2018 17:22:58
Pros:
I bought this sensor from Gearbest and also bought another one different model from another source. I found almost no difference between the two except the one from Gearbest cost two time cheaper while having the same quality. The sensor does it's job when installed and configured properly and helps leveling my hot bed.
Cons:
None
View More

RECOMMENDED PRODUCTS

loading...
Click to description


Auto Leveling Sensor for 3D Printer

Main Features:
● Detection range: 8mm
● Working voltage: DC 6 - 36V
● It is an auto leveling sensor for 3D printers. It can precisely measure the tilt of your print surface
● It can greatly improve the printing precision of your 3D printer
● For Anet A8 or other 3D printer which has the software of the automatic leveling control system

Specification

General

Suitable for: Accessory

Weight and Size

Package size: 10.00 x 8.00 x 4.00 cm / 3.94 x 3.15 x 1.57 inches
Package weight: 0.0850 kg
Product size: 8.00 x 7.00 x 2.20 cm / 3.15 x 2.76 x 0.87 inches
Product weight: 0.0620 kg

Package Contents

Package Contents: 1 x Auto Leveling Sensor ( 150cm Line )




Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

  • All (152)
  • Photos (64)
  • Videos (19)
4.78 *****
Andre
Feb/09/2017 08:40:33
Pros:
I can confirm this sensor will work with the Anet A8 3D printer. The sensor does need a different mount but that can be found online and printed easily. You will need to swap the blue and brown wire. A firmware upgrade will also be required but once completed the printer will auto level. Over all I'm pleased with the purchase and shipping time required to arrive.
Cons:
You need to swap the brown and blue wires. 30 seconds of work.
B. Modelling
Sep/24/2017 20:53:46
Pros:
Diese Ergänzung zum 3D-Drucker ANET A8 ist uneingeschränkt zu empfehlen. Dieser Sensor macht den 3D-Druck so easy wie Farbdrucke mit einem Normalen Drucker. Einmal kallibriert geingt so gut wie jeder Druck auf anhieb. So macht 3D-Druck einfach nur freude. Bevor ich diesen Sensor hatte mußte ich nach jedemausschalten des Druckers diesen neu kallibrieren, das über nimmt nun der Sensor. Einschalten druck starten und warten bis das Bauteil fertig ist. Nie war 3D-Druck so einfach.
Cons:
Ich kenne keine, man sote nur darauf achten will man eine Glasscheibe als Druckbett nutzen dann funktioniert dieser Sensor nicht der Schaltabstand ist zu gering um durch die Scheibe das Metallbett zu erkennen und so würde der Extruder auf der Galsscheibe aufsetzen.
Yev
May/11/2018 17:22:58
Pros:
I bought this sensor from Gearbest and also bought another one different model from another source. I found almost no difference between the two except the one from Gearbest cost two time cheaper while having the same quality. The sensor does it's job when installed and configured properly and helps leveling my hot bed.
Cons:
None
Mr. Freeze
Oct/31/2017 22:06:14
Pros:
Recommended sensor to add autoleveling to my 3D printer Anet A8. To get it to work you need to swap the cable brown<->blue. Then you need the firmware "Skynet" as well. Have not install it yet, but the quality looks good so far.
Cons:
none
ok
Mar/01/2018 09:36:45
Pros:
The sensor works very well. You can adjust the distance perfectly with an aluminum heating bed. The cables are also long enough.
Cons:
non
Igor
Feb/19/2018 10:04:26
Pros:
working pretty well, cheap, easy to install, made printing a lot easier, totally recommended even for someone thats new to 3d printing
Cons:
nothing
Vasilis
Sep/23/2017 21:49:41
Pros:
The initial sensor came broken due to poor packaging. The support center send a brand new with no extra charge.
Cons:
Poor packaging. Since is it a delicate equipment I would expect better and more safe packaging.
Amraohs
Jan/31/2018 08:14:17
Pros:
Works perfect, but took me a long time to figure out that the blue and brown wires need to be switched (inverted) to work on a stock anet a8. Maybe this could be included in the product description.
Cons:
none
Anil
Apr/29/2017 01:10:10
Pros:
when you use with the right software it works perfect. using it with anet a8 and I am very happy with this product.
Cons:
none
Daniel Tinoco
Apr/26/2017 23:23:50
Pros:
Nice build quality and price! Will test it on next weeks. TY
Cons:
Nothing
View More
View More
View More
Save Cart

Practical 6 - 36V Auto Leveling Sensor for 3D Printer

$14.30

color

Quantity - +
installments: choose
loading...
loading...
Cancel
loading...
loading...
loading...