Open our Cool Free APP!

Enjoy APP-Exclusive Deals.

Open APP
1/1

E3D - V6 Long Distance 0.4mm 3D Printer Extruder

4.85 65 Reviews
$8.48

promotion:

If Cart Subtotal exceeds , you can buy 1 Special Add-On for .Discounts automatically applied to shopping cart before checkout.

warehouse

Ship between: Jul 26 - Jul 29
China
selected
SILVER 0.4MM
Visit Store

Customer Reviews

Ronan Tully
Jun 13,2018 04:17:20
Pros:
Good print head, works great when you get it set up properly. Make sure you tighten it well when it is hot. Retraction settings need to be much lower then with a direct print head or it will constantly clog. Throat is lined so I would recommend if you are printing hotter plastics to swap it for an all metal one. Installed on my A8 with no problems.
Cons:
Lack of instructions, but go to the E3D site to install correctly.
Extruder Nozzle
Dec 12,2017 09:35:50
Pros:
This is actually my 2nd pair. As you may know, overtime the nozzle will clog up and im to lazy to clean it up. just replace it. The quality is good. you basically just screw it in the heated block of the printer. Done!
Cons:
No issues.
Johan
May 26,2018 07:39:51
Pros:
This all metal hotend works really good, put it on my Creality Ender-2, could reduce retraction from 7mm to 2.5mm, the whole hotend and PTFE tube have a smaller inner diameter than stock. I haven't tested the heater element nor the thermistor yet (I used the original ones)
Cons:
There were some ridges in the throat that I easily removed by hand with a 2mm drill bit. due to the big cooling block it sits a bit futher out from the bracket so I lost a little printable space in the Y.
View More

RECOMMENDED PRODUCTS

loading...
Click to description


E3D - V6 3D Printer Extruder Hot End Full Kit

Main Features:
● Suit for 1.75mm material
● The E3D - V6 is the updated version of the E3D - V5
● The E3D - V6 has reduced the radiator length, thickness, and diameter ( shorter lengths help to increase the stability of the hot end )
● Heating block is more simple and practical
● Increasing the number of the heat sinks, better heat dissipation performance
● Teflon tube reduces the friction between the filament and the radiating pipe

Specification

General

Model: E3D - V6
Suitable for: Heating / Cooling,Nozzle
Type: Extruder Parts

Weight and Size

Package size: 16.00 x 15.00 x 6.00 cm / 6.3 x 5.91 x 2.36 inches
Package weight: 0.1200 kg
Product weight: 0.0960 kg

Package Contents

Package Contents: 1 x E3D - V6 Long Distance 3D Printer Extruder ( 1m Line ), 1 x PTFE Tube ( 1m Line )

Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

  • All (65)
  • Photos (32)
  • Videos (5)
4.85 *****
Ronan Tully
Jun 13,2018 04:17:20
Pros:
Good print head, works great when you get it set up properly. Make sure you tighten it well when it is hot. Retraction settings need to be much lower then with a direct print head or it will constantly clog. Throat is lined so I would recommend if you are printing hotter plastics to swap it for an all metal one. Installed on my A8 with no problems.
Cons:
Lack of instructions, but go to the E3D site to install correctly.
Extruder Nozzle
Dec 12,2017 09:35:50
Pros:
This is actually my 2nd pair. As you may know, overtime the nozzle will clog up and im to lazy to clean it up. just replace it. The quality is good. you basically just screw it in the heated block of the printer. Done!
Cons:
No issues.
Johan
May 26,2018 07:39:51
Pros:
This all metal hotend works really good, put it on my Creality Ender-2, could reduce retraction from 7mm to 2.5mm, the whole hotend and PTFE tube have a smaller inner diameter than stock. I haven't tested the heater element nor the thermistor yet (I used the original ones)
Cons:
There were some ridges in the throat that I easily removed by hand with a 2mm drill bit. due to the big cooling block it sits a bit futher out from the bracket so I lost a little printable space in the Y.
Thorsten
Mar 16,2017 01:28:00
Pros:
-All metall - no PTFE-tubing inside -Threads are butter-smooth -Very light The throat is M7 on the cold-end side and M6 on the hot-end side, the heater-block clamps down on the heater-element, just like the original from E3D.
Cons:
Since the inner diameter of the Throat was slightly smaller than of the bowden-tube the filament got stuck right on the "seam" between the tube and the throat. I had to work a little on the first 5mm or so of the throat with a 2mm ball-tip-tool from my gravure-set, to make it a little bit wider. Now it works good.
OtterNas3
Mar 18,2017 04:26:53
Pros:
I will replace the Extruder on my Anet A8 with this, it looks good, the Packaging was "ok" If this piece will work great, i will definately buy another three of these for the other Printer's! Thanks GB for the Service!
Cons:
Nothing bad to sa on this one :)
Overlrod_Laharl
Jan 12,2018 08:49:32
Pros:
-All metal -works very well -Bowden (this means the extruder motor gets mounted on the printer frame, and this means less mass (thus jerk) on the extruder carriage) -includes almost everythign needed for use
Cons:
-due to variances of different printers a method to mount this is not included. you will need to print one. so this requires a working printer -due to the limitations of the bowden design there is more stringing. -you will need to add custom firmware on your printer to use this.
Matthew
Feb 22,2018 11:38:41
Pros:
I'm intending to upgrade my ANET E10 with this new head.Great quality and i have tested it and it was working perfectly.
Cons:
None at this time.
Dimo
Dec 06,2017 15:37:42
Pros:
The best price! I had ordered this item as an upgrade for my Anet A8 Hot End, it works and looks great. This item arrived for around 10 days. Good packaging. Fast shipping.
Cons:
I had no cons
Dan Bassa
Nov 06,2017 16:29:10
Pros:
very cheap but good quality product. includes everything you need for the conversion. (fittings,1m ptfe tube, heater, thermistor, heat block, throat, fan, nozzle and heatsink)
Cons:
no cons
Vinicius Rodrigues
Sep 30,2017 16:08:36
Pros:
Great quality product, I recommend it to everyone! It worked on my Anet A8.
Cons:
No have!
View More
View More
View More
New Member's Bonus: $50 Coupon
Save Cart

E3D - V6 Long Distance 0.4mm 3D Printer Extruder

$8.48

color

size

Quantity - +
installments: choose
loading...
loading...
Cancel
loading...
loading...
loading...