Launch our Cool Free App!

Get $3 Off 1st Order.

Launch App
Alfawise U20 ONE 3.5 inch Touch Screen 3D Printer 300 x 300 x 400mm Double Z-axis 
Alfawise U20 ONE 3.5 inch Touch Screen 3D Printer 300 x 300 x 400mm Double Z-axis 
Alfawise U20 ONE 3.5 inch Touch Screen 3D Printer 300 x 300 x 400mm Double Z-axis 
Alfawise U20 ONE 3.5 inch Touch Screen 3D Printer 300 x 300 x 400mm Double Z-axis 
Alfawise U20 ONE 3.5 inch Touch Screen 3D Printer 300 x 300 x 400mm Double Z-axis 
Alfawise U20 ONE 3.5 inch Touch Screen 3D Printer 300 x 300 x 400mm Double Z-axis 
Alfawise U20 ONE 3.5 inch Touch Screen 3D Printer 300 x 300 x 400mm Double Z-axis 
1/1
$319.99
453.73
65 Reviews

Alfawise U20 ONE 3.5 inch Touch Screen 3D Printer 300 x 300 x 400mm Double Z-axis  - Black Touch Screen EU Plug

Coupon:

Promotion:

Support COD payment

Warehouse & Fee

Select
CN-0991:Ship between: Jul 13 - Jul 15

Product Options

Select
Black Touch Screen EU Plug
Visit Store

Reviews (65)

Zugo
Apr 19,2020
Vorab, das ist mein erster 3-D-Drucker. Er kam gut verpackt an und tatsächlich waren nicht allzu viele Schritte notwendig, um ihn aufzubauen.Die Anleitung ist für den Aufbau etwas dürftig. Daher empfiehlt es sich paar Youtube-Videos anzuschauen. Unter dem Verkaufsangebot ist auch ein Video, wo eine junge Dame den Aufbau tätigt. Das ist schon mal viel wert. Es ist schon eine Weile her, dass ich den Drucker aufgebaut habe. Mir ist aber so, dass ich mich bei den Kabelanschlüssen auf die Umsetzung der Anschlussstellengröße sowie der Kabellänge orientieren musste. Die benannten Beschriftungen an den Kabeln selbst brachten mir nicht wirklich viel. Mitgeliefert wird etwas weißes Filament zum Probe-Druck. Die mitgelieferte Matte ist auf die Glasplatte zu kleben. Das steht leider auch nirgendwo. Auch das erschließt sich aufgrund der mitgelieferten vier Klammern. Fälschlicherweise habe ich sie direkt auf die Heizplatte geklebt. Nun habe ich es so kalibriert und benutze es ohne Glasplatte. Auf einem Video war es (leider) genauso gehandhabt. So habe ich mich auch dazu verleiten lassen.Der Drucker tut, was er tun soll. Es stehen zwei Druckformate zur Verfügung, um sie über die mitgelieferte Mikro-Karte ohne Anbindung zum PC zu drucken. Ich schätze, die Lösung ist besonders für die Leute interessant, die den Drucker weiter weg vom PC betreiben möchten. Schließlich ist der Lärmpegel zwar erträglich aber doch störend. Eine direkte USB-Anbindung ist aber auch möglich. Die mitgelieferte Mikro-SD Karte steckt in einem USB-Adapter, um neue 3D-Druck-Dateien raufkopieren zu können. Dieser enthält auch 2 Beispiel-3D-Drucke , die Anleitung in EDV-Form sowie mögliche Programme zum Modellieren eigener Drucke (Ultimaker Cura usw.). Die Mikro-SD-Karte lässt sich schwer aus dem mitgelieferten USB-Adapter herausziehen. Es empfiehlt sich einen anderen Adapter zu benutzen. Ich lasse die Heizplatte auf 60 Grad und die Drucker-Drüse auf 200 Grad Celsius erwärmen. Das hat immer funktioniert. Größere Drucke habe ich noch keine anfertigen lassen. Das kommt vielleicht noch... ;-)Für Einsteiger wie mich kann ich diesen 3D-Drucker ruhigen Herzens weiterempfehlen. Es gibt tolle Videos bei YouTube auch in Deutsch dazu.Freie 3D-Drucke gibt es im Internet viele. Man kann diese mit der mitgelieferten Anwendung Cura für den eigenen Drucker formatpassend importieren und abspeichern.
View More

Discussion

View More
When European warehouse please? Hello PFa,Generally, most of our items will be shipped within 3-7 business days after payment. However, the exact processing time varies depending on the item.Please refer to our shipping estimations below:1) Expedited Shipping: 3-7 business days 2) Unregistered Air Mail & Registered Air Mail: 10-40 business days3) Priority Line: 5-25 business days (Only available for certain countries)Learn more information about our shipping methods here: http://www.gearbest.com/about/shipping-methods.html 

Description

No.1 Choice for Your Brilliant Ideas
Alfawise U20 ONE 3D printer not only can build big, exciting models up to 300 x 300 x 400mm, but also produce flawless details. Double Z axis and motors stabilize the performance and facilitate bed leveling since both motors can be adjusted individually to effectively eliminate tilt. Makers prefer Alfawise U20 ONE with which they can enjoy the absolute freedom to change, improve, upgrade the machine/system, thanks to the open source system. The host of Alfawise U20 ONE is integrated with the build platform, saving more space on the workbench. What else are you looking for? It can't be easier to start with. Start bringing your ideas to life in only 3 steps!

Main Features:
3.5 inch color touch screen with better UI, offers total control of the process, and easy access to the settings
300 x 300 x 400mm large print size, standard building volume, meet your different printing needs
Instant assembly in only 3 steps, foolproof all-in-one 3D printer without external host, more space-saving
Integrated structure, the center of gravity is more stable, and improve the printing quality
● Double Z axis and two independent Z motors for more precise printing, easier and more consistent bed leveling
● Open source with the latest Marlin system for absolute freedom of customization, upgrades, as well as more expertise
● Power outage resume and filament run-out protection for 100% completion of prints
● 24V built-in power supply, 50% lower current for ultimate safety

Pleaseclick here to download the open source code.

Note:
In order to ensure the effectiveness of power continuation better, please power on more than 1 minute after power failure.

Specification

General

Brand: Alfawise
Model: U20 ONE
Type: Complete Machine
Material (Frames): Aluminium Extrusion
Platform board: Aluminum Base
Engraving Area: 300mm*300mm*400mm
Engraving Accuracy: 0.1-0.3mm
Nozzle quantity: Single
Nozzle diameter: 0.4mm
Nozzle temperature: Room temperature to 250 degree
Product forming size: 300mm x 300mm x 400mm
Layer thickness: 0.1-0.3mm
Memory card offline print: TF card
LCD Screen: Yes
Print speed: 10-120mm/s
Platform temperature: 0 - 80 Degree Celsius
Supporting material: ABS,PA Wood,PLA,TPU
Material diameter: 1.75mm
Language: Chinese,English
File format: G-code,OBJ,STL
Model supporting function: Yes
XY-axis positioning accuracy: 0.012mm
Z-axis positioning accuracy: 0.004mm
Voltage: 110V/220V
Working Power: 24V
Host computer software: Cura
Packing Type: unassembled packing
Supporting Paper Size: no
System support: Windows, Linux, MAC
Laser Lifetime: no
Laser Wavelength(nm): no
Voltage Range: 220V / 110V AC input
Current (mA): 15A
Connector Type: TF card,USB
Certificate: CE

Dimensions and Weight

Product weight: 9.5000 kg
Package weight: 13.3600 kg
Product size (L x W x H): 58.80 x 48.80 x 60.80 cm / 23.15 x 19.21 x 23.94 inches
Package size (L x W x H): 64.00 x 55.00 x 26.50 cm / 25.2 x 21.65 x 10.43 inches

Package Contents

Packing Contents: 1 x Machine Base, 1 x Frame, 1 x Power Cord, 1 x Support Rack, 1 x Filament Holder, 1 x Gantry, 1 x Spade, 3 x Hex Wrench, 1 x Open-ended Spanner, 4 x Screw for Main Frame, 1 x Nozzle, 1 x SD Card, 1 x 3M Hotbed Sticker, 5 x Zip Tie, 3 x Fixed Block, 3 x M4 T Nut, 1 x M4 T Screw, 4 x M4 Round Screw, 1 x Filament
Alfawise U20 ONE Double Z-axis 3D Printer Instant Assembly - Black Touch Screen EU Plug
Alfawise U20 ONE Double Z-axis 3D Printer Instant Assembly - Black Touch Screen EU Plug
Alfawise U20 ONE Double Z-axis 3D Printer Instant Assembly - Black Touch Screen EU Plug
Alfawise U20 ONE Double Z-axis 3D Printer Instant Assembly - Black Touch Screen EU Plug
Alfawise U20 ONE Double Z-axis 3D Printer Instant Assembly - Black Touch Screen EU Plug
Alfawise U20 ONE Double Z-axis 3D Printer Instant Assembly - Black Touch Screen EU Plug


Alfawise U20 ONE Double Z-axis 3D Printer Instant Assembly - Black Touch Screen EU Plug




Alfawise U20 ONE Double Z-axis 3D Printer Instant Assembly - Black Touch Screen EU Plug

Alfawise U20 ONE Double Z-axis 3D Printer Instant Assembly - Black Touch Screen EU Plug


Recommended Products

Sponsored Products

New Member's Bonus: $10 Coupon
$319.99

Alfawise U20 ONE 3.5 inch Touch Screen 3D Printer 300 x 300 x 400mm Double Z-axis 

Color

Size

Quantity - +
installments: choose
loading...
loading...
cancel
loading...
loading...
loading...

Reviews

4.8 *****
  • 53
  • 13
  • 0
  • 0
  • 0
  • All ( 65 )
  • ( 27 )
  • ( 6 )
Zugo
Apr 19,2020
Vorab, das ist mein erster 3-D-Drucker. Er kam gut verpackt an und tatsächlich waren nicht allzu viele Schritte notwendig, um ihn aufzubauen.Die Anleitung ist für den Aufbau etwas dürftig. Daher empfiehlt es sich paar Youtube-Videos anzuschauen. Unter dem Verkaufsangebot ist auch ein Video, wo eine junge Dame den Aufbau tätigt. Das ist schon mal viel wert. Es ist schon eine Weile her, dass ich den Drucker aufgebaut habe. Mir ist aber so, dass ich mich bei den Kabelanschlüssen auf die Umsetzung der Anschlussstellengröße sowie der Kabellänge orientieren musste. Die benannten Beschriftungen an den Kabeln selbst brachten mir nicht wirklich viel. Mitgeliefert wird etwas weißes Filament zum Probe-Druck. Die mitgelieferte Matte ist auf die Glasplatte zu kleben. Das steht leider auch nirgendwo. Auch das erschließt sich aufgrund der mitgelieferten vier Klammern. Fälschlicherweise habe ich sie direkt auf die Heizplatte geklebt. Nun habe ich es so kalibriert und benutze es ohne Glasplatte. Auf einem Video war es (leider) genauso gehandhabt. So habe ich mich auch dazu verleiten lassen.Der Drucker tut, was er tun soll. Es stehen zwei Druckformate zur Verfügung, um sie über die mitgelieferte Mikro-Karte ohne Anbindung zum PC zu drucken. Ich schätze, die Lösung ist besonders für die Leute interessant, die den Drucker weiter weg vom PC betreiben möchten. Schließlich ist der Lärmpegel zwar erträglich aber doch störend. Eine direkte USB-Anbindung ist aber auch möglich. Die mitgelieferte Mikro-SD Karte steckt in einem USB-Adapter, um neue 3D-Druck-Dateien raufkopieren zu können. Dieser enthält auch 2 Beispiel-3D-Drucke , die Anleitung in EDV-Form sowie mögliche Programme zum Modellieren eigener Drucke (Ultimaker Cura usw.). Die Mikro-SD-Karte lässt sich schwer aus dem mitgelieferten USB-Adapter herausziehen. Es empfiehlt sich einen anderen Adapter zu benutzen. Ich lasse die Heizplatte auf 60 Grad und die Drucker-Drüse auf 200 Grad Celsius erwärmen. Das hat immer funktioniert. Größere Drucke habe ich noch keine anfertigen lassen. Das kommt vielleicht noch... ;-)Für Einsteiger wie mich kann ich diesen 3D-Drucker ruhigen Herzens weiterempfehlen. Es gibt tolle Videos bei YouTube auch in Deutsch dazu.Freie 3D-Drucke gibt es im Internet viele. Man kann diese mit der mitgelieferten Anwendung Cura für den eigenen Drucker formatpassend importieren und abspeichern.
l.swordfish
Jul 07,2020
After the indicated time of the U20 came one with me and was assembled relatively quickly. Then the trouble started. Unfortunately, neither a calibration and thus any pressure was possible. The support reigned as expected quite tough and even by e mail and Allerwelts advice. After 2 days, nightly search and ner pretty lousy mood I had found what it was, the micro limit switch of the Z axis was broken, probably 0.2 cents metal plate was simply not there. All attempts since failed to improvise something. The support further ruled tough and after I was in a bad mood significantly and this also communicated was answered "contact with the management" or threatened, I had as I should interpret it no idea what brought me really laugh. There were long photos and a video are made and the "SUPPORT" was still not sure what it was. It was so clear that it understood even people with very little technical understanding and interest. Simply Catastrophic this contact to the "SUPPORT". The offer was the printer to send to the camp to Spain (pointing to my cost) and then to be able to soon arrived choose among three options: Add Printer voucher Gearbest or your money back. I decided to laugh at you to order 4 Micro switch incl. Cable for € 13 and some change on EBay and take the whole into their own hands. Why 4, there were only a set. Support I laughed on to say it informed him that "Treebeard" Lord of the Rings is faster and waited for the switch. Once they were there, I soldered the micro switch (the board was 90 °) soldered it to the printer board and what can I say, it worked. The support has replaced me the amount of the switch. Print quality, I am now satisfied after many attempts but that more was up to me, a 96-hour endurance test he has passed well behind and genuine. All in all, it runs now but as I said, the support ??? Probably sitting somewhere in the world someone Allerweltsfragen can answer, but of technology, he really had NO idea. Too bad. If I order again at Gerbest? Yes, but I know that I'm asked me.
Fabio
Jul 07,2019
I chose this printer (my first printer) especially for the renewed style and the improvements made to the Z axis compared to the sister U20, here in fact we have a double motor on the Z axis and for the few tests I have done so far I can say that of the usual problems read around the forums, not even the shadow here. Everything arrived in an impeccable packaging, the inside of the box is preformed and there was no possibility for the various components to move during transport. Once the printer was assembled, I realized that many of the adjustments and tightening (even of the parts assembled from the house), needed a revised one. The plate was practically very slow on its track, as were the straps of the various axes. The cables run inside the corrugated cut on one side and especially those for the Z axis suffer a lot when printing at the maximum height, that is 400mm. I tightened everything and switched to the ignition and setup to find the right leveling of the floor. Here I immediately realized that something is wrong with the Y axis, it is as if the head (and therefore the extruder) could not reach a maximum stroke of 300mm ... actually I am still studying the question why in manual I can move freely around the entire plate, while in leveling or printing this thing is more than evident. However, I strongly recommend this printer, solid and easy to assemble, I am sure that once I find the solution to my problem (a matter of days), it will know how to satisfy all my needs. Brava Alfawise you made the center again this time ;-)
Hervé M
Feb 06,2020
The alfawise U20 is an excellent printer for the price. Assembly as simple as possible, great and high printing surface, double motorization of the Z axis, color touch screen. The printing is good quality input, even if we can have the appearance of salmon skin, it is really great for the price. The fans are pretty quiet (relatively), the stepper motors, however, are a bit more noisy than on some printers. Small least are especially at the pre-assembly, even if the printer only happens in two parts and its assembly is simplified to the maximum, it is really necessary to check all screw tightening. I got for the model has been damaged threads at the "nuts" of the Z axis, which implies a new thread. Once these issues resolved, everything goes really for the best. Some improvements could beings useful buildtak of the bed hangs a little too much, even completely cold, sometimes it's really hard to shift parts and the user menu is not very intuitive. For my part, I added TL Smoothers, reinforcements for the Z axis you can find easily on Gearbest and I also changed the wheels on wheels polycarbonate less fragile than the original. Otherwise, go ahead, for the price, it really is happiness!
Francesco
Feb 14,2020
I chose this printer because it had good reviews and I must say that the five-star deserves all, just arrived (early) I immediately mounted, about an hour, the plate was detached from the base so after it mounted and tight springs almost full I did two times the calibration because of too much space between the nozzle and the glass in the first leveling, I find it very good and I would recommend it if someone asked 3d which printer to take, value great price, of course comes with the bare minimum but a once mounted every man can set up as required with the colors that own terms. I'm happy, a little something to uppare for perfection but for a neophyte who could go so well. I think further, not now ride on the smoother, the effect is there but salmon is not very pronounced and does not even make all this noise in the press. I think it's been updated in the first laps components, I saw video of shoddy pieces but this does not seem to have these problems. It has the glass plate which in some reviews is missing. Overall 5 stars.
Francesco
Jan 06,2020
The object reaches well sealed in a rugged box. The printer is partially assembled and can be used in less than an hour. any flaw I found in the pre-assembled parts that are solid, well recorded and with the right tolerances, the overall quality is high. I tried it with the PLA, the product produces well-made prints without the need to search for advanced settings (which can then be discovered and set with all then calm). The software bundle that comes on the SD card is full (though dated) and pressed to access the most advanced parameters (including step per mm, settings that do not appear on the touch screen). I use it with care and Octoprint, and although my first printer, I was struck by the simplicity of use.
Alfawise U20 ONE
Apr 27,2020
I have decided to buy U20 One as I have very positive opinion of my second 3d printer Alfawise U30. This is my third printer, the biggest one and the best, so became my favourite :-) Parcel arrived about a week after the purchase. Assembly was very easy. I have done levelling (3 times, one by one to achieve most accurate results) and straight after that I have printed 3dBenchy (attached photos). The results are extremely positive :) The quality of printing is much above the average :) I have 2,5 years of experience in 3d printing and I have to say that I am very satisfied with this purchase. Hotbed size 300x300 and height at 400mm makes possible printing big models :) I recommend the product and the seller.
Игорь
Dec 03,2019
Beautiful and high-quality toys. Made very solidly, two synchronous shaft, carefully wrapped wire touchscreen color display, printing out of the box. Everything would be fine, but .... Stepper motor drivers have radiators. giblets ventilation absent. The head of the park is not on the table (it is necessary to collective farms trailer extender). Fan thermal barrier is too noisy. Firmware only with flash cards. It stated that the printer is sewn open source Marlin - lie. Make changes, and to calibrate the flow of steps, configure the printer by itself, written in the memory card or connect heights BLTouch not get. If there was a choice now, I took to Alfawise U20 with remote unit, and better Tevo Tornado. And now I will change the charge on the SKR. Unfortunately, I can recommend this product to those who are looking for 3D printing only entertainment.
Sabrina B
Apr 24,2020
Après une grande hésitation, je me suis décidé pour la u20 one, commandé le dimanche soir reçu le mercredi suivant après-midi en fast 30 (très rapide) avec au fur a mesure suivi du colis, sms prévenant de l'arrivée imminente du chauffeur, ravie. machine parfaitement emballée, juste le support de bobine imprimée 3d cassé mais un peu de colle et hop ! très facile a monter et rapide, juste bien verifier les vis, je suis débutante et ravie pour une 1ere acquisition, a bientôt gear best pour un prochain achat !
sophie
Jun 24,2019
It's all together and getting ready to kick off the first print. This one took about an hour longer than the last because I was much more careful about making sure everything was square and tight. X axis belt is the trickiest part to do and I had a head start because I knew to thread it before I started assembling the X carriage. One screw was missing and the Z axis screws that hold the worm screw were all way too tight. Again, I knew to loosen them, so all was good. Great results and I look forward to adding it to my print rotation.
View More
View More
View More