Launch our Cool Free App!

Get $3 Off 1st Order.

Launch App
EcubMaker TOYDIY 4-in-1 3D Printer FDM Laser CNC with Auto Levelling Heatable  Dual PLA all in one
EcubMaker TOYDIY 4-in-1 3D Printer FDM Laser CNC with Auto Levelling Heatable  Dual PLA all in one
EcubMaker TOYDIY 4-in-1 3D Printer FDM Laser CNC with Auto Levelling Heatable  Dual PLA all in one
EcubMaker TOYDIY 4-in-1 3D Printer FDM Laser CNC with Auto Levelling Heatable  Dual PLA all in one
EcubMaker TOYDIY 4-in-1 3D Printer FDM Laser CNC with Auto Levelling Heatable  Dual PLA all in one
EcubMaker TOYDIY 4-in-1 3D Printer FDM Laser CNC with Auto Levelling Heatable  Dual PLA all in one
EcubMaker TOYDIY 4-in-1 3D Printer FDM Laser CNC with Auto Levelling Heatable  Dual PLA all in one
EcubMaker TOYDIY 4-in-1 3D Printer FDM Laser CNC with Auto Levelling Heatable  Dual PLA all in one
EcubMaker TOYDIY 4-in-1 3D Printer FDM Laser CNC with Auto Levelling Heatable  Dual PLA all in one
1/1
$799.00
799
Save an extra 0 with the app
5 13 Reviews

EcubMaker TOYDIY 4-in-1 3D Printer FDM Laser CNC with Auto Levelling Heatable Dual PLA all in one - Four Functions_Black Germany

Coupon:

Promotion:

Support COD payment

Warehouse & Fee

Select
P-1000:Ship between: Aug 09 - Aug 14

Product Options

Select
Four Functions_Black Germany
Visit Store

Reviews (13) View More

Kevin Whitmer
Dec 03,2019
I have always wanted a 3-in-1 printer (with FDM printing, CNC carving, and laser engraving) but most of these machines are very expensive. So when I found a 4-in-1 printer that was much cheaper than others, I decided to go for it and see what I thought of the machine. And I’m pretty happy with my purchase.The Ecubmaker 4-in-1 Printer comes packaged very nicely. There are multiple smaller, labeled boxes inside of the big box- inside of these boxes you can find the 4 tool heads, the filament, the filament holder, and the tools/parts. Inside of the big box you can find the printer body, already assembled. This printer requires minimal assembly- all you have to do is attach the necessary tool head and start printing! Before using the printer, I wanted to take an in depth look at the printer and it’s structure.The printer is built mostly out of metal- it is very sturdy. The words “Ecubmaker TOYDIY 4-in-1 Printer” are engraved on the front of the printer. The power button is on the front of the printer, and when you power it on, it lights up. Also, when you power on the printer, there is a light near the top of the printer that lights up. The SD card goes into the side of the printer. For the bed, you can switch between the CNC carving raft and the magnetic build plate.I started by testing the FDM printing capabilities. First, I had to switch the tool head. Ecubmaker has made this very easy; all you have to do is go to the LCD screen, click change tool head, and follow the instructions. This process shouldn’t take more than one minute. For the FDM toolhead, you just have to load the filament and start printing. The FDM printer works well, and I’ve been able to get many successful prints.The dual FDM printing feature is something you don’t find in many 3-in-1 printers. This feature has worked very well for me- you just have to load both filaments and start printing. The dual color printing is a little different than others- the filament comes out of one nozzle but has 2 extruders. These prints have come out nicely for me so far as well.CNC carving works well for this printer as well. Before printing with it, you have to change the build plate to the CNC carving raft. Then you can start carving. One con of the CNC carving is that it is very loud. But the results are amazing.The final feature of this printer is laser engraving. Ecubmaker includes a pair of safety glasses to ensure you don’t damage your eyes by looking at the laser. The laser engraving feature is probably my favorite part from this printer- the results are amazing. I messed up my first laser print a little (the wood was off center). This feature works well but ensure that children stay away from this laser.Ecubmaker has also included a software called EcubWare. This is based off of Cura. This software is pretty decent and allows you go slice files directly to your printer.

Description

Main Features

1.TOYDIY has FDM 3D printing, dual-color 3D printing, CNC engraving and laser engraving four functions. It can be quickly replaced in 30 seconds. TOYDIY has 180*180*180mm work space, no assembly required, that delivers users out-of-the-box experience.

2.3D Printing supports PLA filament, TOYDIY can realize full-automatic leveling. Three-layers heated bendable buildplate and the soft magnetic plate can easily remove the model. FDM-Dual Toolhead supports dual-color 3D printing of PLA filaments with two different colors.

3.Laser engraving uses a 1500mW high-power laser, it can carve the surface of wood, plastic, leather and other materials.

4.TOYDIY 4-in-1 special software EcubWare supports the set up and slicing of four Toolheads without the need for additional dedicated software. After changed the Toolhead, can automatically recognize the corresponding print file. First-time users can get started very easily. EcubWare supports the above win7.64bit OS, and will support MAC system in the future.

➤Warning:The FDM Toolhead and FDM-Dual Toolhead contain heating elements.Do not touch the nozzle directly by your hands to avoid acald.After printing,let TOYDIY cool down to indoor temperature before cleaning.
➤Warning:Laser Toolhead contains Laser deevice.Make sure your wear Safety Glasses when using it. Do not observe the laser directly without Safety Glasses.
➤Warning:CNC Toolhead contains high-speed motor,violation operation may cause damage to graver,make sure you wear Safety Glasses when using it.
➤Warning:When inspecting the machine,please pull out the plug at first,and make sure it has been powered off before checking.
➤Warning:Do not move the axis by hand directly,otherwise the driver chip on the motherboard will be burnt.
➤EcubWare only supports the 64-bit operating system above win7, and doesn’t support Apple MAC system for the time being.

Specification

View More

View More 

Recommended Products

Sponsored Products

New Member's Bonus: $10 Coupon
$799.00

EcubMaker TOYDIY 4-in-1 3D Printer FDM Laser CNC with Auto Levelling Heatable Dual PLA all in one

Color

Ships From

Quantity - +
installments: choose
loading...
loading...
cancel
loading...
loading...
loading...

Ship to

Reviews

5 *****
  • 13
  • 0
  • 0
  • 0
  • 0
  • All ( 13 )
  • ( 2 )
  • ( 0 )
Kevin Whitmer
Dec 03,2019
I have always wanted a 3-in-1 printer (with FDM printing, CNC carving, and laser engraving) but most of these machines are very expensive. So when I found a 4-in-1 printer that was much cheaper than others, I decided to go for it and see what I thought of the machine. And I’m pretty happy with my purchase.The Ecubmaker 4-in-1 Printer comes packaged very nicely. There are multiple smaller, labeled boxes inside of the big box- inside of these boxes you can find the 4 tool heads, the filament, the filament holder, and the tools/parts. Inside of the big box you can find the printer body, already assembled. This printer requires minimal assembly- all you have to do is attach the necessary tool head and start printing! Before using the printer, I wanted to take an in depth look at the printer and it’s structure.The printer is built mostly out of metal- it is very sturdy. The words “Ecubmaker TOYDIY 4-in-1 Printer” are engraved on the front of the printer. The power button is on the front of the printer, and when you power it on, it lights up. Also, when you power on the printer, there is a light near the top of the printer that lights up. The SD card goes into the side of the printer. For the bed, you can switch between the CNC carving raft and the magnetic build plate.I started by testing the FDM printing capabilities. First, I had to switch the tool head. Ecubmaker has made this very easy; all you have to do is go to the LCD screen, click change tool head, and follow the instructions. This process shouldn’t take more than one minute. For the FDM toolhead, you just have to load the filament and start printing. The FDM printer works well, and I’ve been able to get many successful prints.The dual FDM printing feature is something you don’t find in many 3-in-1 printers. This feature has worked very well for me- you just have to load both filaments and start printing. The dual color printing is a little different than others- the filament comes out of one nozzle but has 2 extruders. These prints have come out nicely for me so far as well.CNC carving works well for this printer as well. Before printing with it, you have to change the build plate to the CNC carving raft. Then you can start carving. One con of the CNC carving is that it is very loud. But the results are amazing.The final feature of this printer is laser engraving. Ecubmaker includes a pair of safety glasses to ensure you don’t damage your eyes by looking at the laser. The laser engraving feature is probably my favorite part from this printer- the results are amazing. I messed up my first laser print a little (the wood was off center). This feature works well but ensure that children stay away from this laser.Ecubmaker has also included a software called EcubWare. This is based off of Cura. This software is pretty decent and allows you go slice files directly to your printer.
marcpoun
Nov 27,2019
This is our first 3D printer and where it was a 4-in-1 we were really excited to use the other functions as well. Before I go any further, please note that customer service from this company is beyond extraordinary. Any time we have run into an issue they have been able to respond and get us help within a few hours.The machine itself is heavy, which is great. It definitely helped to provide a sense sturdiness, it was comforting knowing this machine was strong and shouldn't be hurt by a few newbies. Unfortunately sturdy and great are 2 very different things.The first time we attempted to use the 3d printer on anything but a test file the FDM nozzle immediately dug into the mat. We had not changed the Z Offset since the test prints so we were very confused. We got in contact with the company and they walked us through adjusting that offset. The values given as part of the instruction manual were unfortunately off by about .5mm.We then began a long print on a model with a large footprint. The filament was too far above the printing plate to adhere on one side of the plate. The best we can figure is the plate is not truly flat, so we print everything with a raft to counteract this.Finally, after a few months of frequent use on the FDM and Dual FDM toolheads we are finding cracks running through the casings to the point that one of them recently fell apart. The clamps that hold the Bowden Tubes in place have loosened and now it is difficult to keep the tubes seeded, and we have been finding metal shavings by the filament clamps on the back of the machine that is being pulled into the extrusion tubes.We have not tried the CNC toolhead yet, but have found the laser to be fantastic and have not had any real problems with that as of yet.Overall for our first 3D printer, it is really nice. We have used it quite a bit and have found a love for the printing. We use the laser quite a lot as well. it was definitely a good starting point for a 4-in-1 and anticipate using it for as long as we can. I am simply glad we got it when there were some substantial discounts in place.
ADMI
Nov 25,2019
So far I have been testing out normal prints and am halfway through a 30 hour print. The printer came fast from amazon, and it was packed well. Nothing was damaged when I opened the box and it was easy to unpack. The thing was covered with foam to prevent any movement, and all the heads were in bubble wrapping. It was easy to open too.I like how one of the printing base is soft, so in the case that the extruder head goes into the plate, there is less of a chance of head damage or frame warpage.The tuning dial is very responsive and there is no lag with the printer controller when selecting options.Its cool that they make it easy to adjust settings while the print is running. The temperature could be changed, print speed, fan speed, and base plate heat. With huge prints, you could swap out filament once one roll runs out, or you could even hot swap filaments after pausing the print while the print is running.The machine is really heavy which makes it sturdy because it has a big base that holds the rest of the machine down.The printer automatically zeros each print so you don't really have to set anything up for a print, just process a Cura file and print.Same for the dual filament printing, cnc function, and laser engraving. JUST MAKE SURE TO USE THE GLASSES when using the laser. If for some reason the laser reflects off of something, it could get into your eye. Its better to be safe than sorry, and the laser is probably Class 2, which means its dangerous, since it could burn wood.The head jammed one time and was easy to clear out, and the feeder works well.I asked them to help me clear the jam and they gave pretty good instructions. They responded quickly to my questions and walked me through the process well.I'm excited to print my ideas out!
Molly Maguires
Nov 29,2019
Bang on!! I haven’t encounter so many issue to work on it. Just take several hours to know about the 4 functions one by one. Done all the test print provide on the SD card. And altogether I can say it’s quiet impressive.Before going to further details I wanted to mention that- their customer service was great. I contacted them for a confusion during CNC milling. And they reply within a moment with the proper details. That’s a great work!Among these 4 function on this machine so far I have spent much time in Laser Engraving. Doing some projects for my company. They have an independent software for Laser Engraving which is a great bonus when using this Functions. Coz it’s more likely a professional engraving function. I found it so much useful for my works.Doing some FDM printing too. Most of the model comes with good finishing. As I have new to this 3D Printing world, I thought that I may face some issue with the FDM. But overall it becomes so easy. Just needed to adjust the layer height and some other parameters.If I want to talk about the tools comes with the machine is ready to go. Actually I don’t need anything to start with it. All the tools and materials comes with it. Later I buy some filaments and wood sample for my work .Not so hard to learn for beginners. Easy set up and easy to use software also. quited please with what come out as not disppointed me
Diane Murray
Dec 02,2019
The use of this machine is many. That’s why I love my 3DPrinter. I don’t need to worry about the 4 function it has anymore. And the quality of those functions is really very good.Auto leveling features helps me lot from having printing trouble. The platform never getting hot because of the heat absorbing technology. So I can easily take out my 3D Printing right after finishing it.And one more important things are, it doesn’t need any assemble, its pre assemble machine. Nowadays there is few machine who give this type of system.The software for designing it provides, is also very rich in content. I can easily edit or design my model with the ecubware software.I will recommend everyone to buy this machine, as its very cheap by comparing with the lots of advance feature and functions.
Kyfho
Apr 21,2020
I initially had issues with postage of this item but the seller kept in communication with me all the way through the process until it arrived. The seller went out of their way to help me and I cannot thank them enough for all of their help.As for the printer itself - This is an excellent 4 in 1 printer that comes with dual extrusion for the 3D printer module, a laser engraver, and a CNC module to boot which all comes neatly packaged with 2 rolls of filament and all the tools you will need to maintain the printer.The instruction manual is very clear and easy to follow and the Slicer software is also easy to use.I would definitely recommend this product for anyone wishing to get into 3D printing but also wishing for the extra tools.
carlscotteddie
Nov 26,2019
I just start to learn 3d printing half month ago so that I wanted to buy one that easy use and this is the one I bought this FDM printer with extra toolheads of CNC carving and laser engraving, it is more than I expected. after test print I can complete my demo now. first of all, I downloaded STL file from Thingiverse website, then open Ecubmaker software, opened stl file i wanted, adjusted demo size , clicked FDM mode using RAFT mode with 15% infill, then wait for slicing process, after the slicing is finished that save it to my SD card, plug SD card into the TOYDIY printer, choose the file start printing, I have it worked 10 files, better and better, I'm quite looking forward to making more toys for my family. I haven't try CNC and Laser one, but I will do that later after I have satisfied FDM sample.s
Talor SW
Dec 09,2019
When I received the package I was really impressed with the function and price performance. Small machines with three functions are convenient and inexpensive.I mainly use the FDM printing function, which was installed when I received the package. I just need to install the tool head and turn the screws, which is very convenient.In the first operation, I printed the test model, and the finished product was very smooth. I was a little confused by some of the Chinese characters on the SD card, and I quickly figured out how to do it after watching ECUBMAKER's instructional video. I liked it
S.Lewis
Dec 11,2019
Extremely easy to assemble. The software is fairly easy to figure out when combined with the well produced YouTube videos. Support is via email or Facebook group and responsive promptly. The kit itself is unbelievably well packaged for shipping and could probably survive being dropped off the side of a mountain.My only complaint is the magnetic pad and the process for aligning the laser is not easy for me to get perfect, maybe it gets better when I pratice more, and anything but nailing that can leave you with a slightly crooked engraving.
Josephine
Dec 04,2019
*eine Maschine für 4 Funktionen, die 4 Maschinen entsprechen* Hervorragende Druckqualität, die viel teureren Druckern Konkurrenz ist*Vormontage, keine Notwendigkeit Kampf mit aseembly überhaupt.* Die Düsen, die mit dem Drucker kommen, sind ideal für den Allgemeinen Druck, aber versuchen Sie auch andere Größen - der Qualitätsunterschied zwischen den Standarddüsen (0,4 mm) und einer 0,2 Düse sind erstaunlich.* Für Ihre ersten Drucke, üben Sie, indem Sie einige der Upgrades von Thingiverse.
View More
View More
View More