Home > 3D Printers, 3D Printer Kits > 3D Printers, 3D Printer Kits

DetailDescriptionReviews

3D Printer & Supplies

3D Printers, 3D Printer Kits

flash sale

$299.99
11pcs left
Ends in:

Tronxy X3S Aluminum Frame LCD Screen 3D Printer DIY Kit

Additional Purchase Deal: If Cart Subtotal exceeds 30.00, you can purchase 1 Add-On for 1.99, Discounts are automatically applied to your shopping cart before checkout. View Promo >>
Warehouse Ships after Apr 26 - Apr 28
China
Selected US PLUG

Customer Reviews

  • Neil Warwick

    Apr/01/2018 16:55:43
    Pros:
    I wanted to get into 3D printing and I believe that the best way to learn about something is to build it. After all, if you understand how it works then you will be able to fix it if you have problems.

    It’s cheap! You get a box containing all of the bits needed to build a 3d printer much cheaper than buying all the bits individually. You don’t have to design anything because the manufacturer has done that for you, all you have to do is assemble it. Although you do need to have a basic competence in order to build it successfully, it’s not a nuclear submarine and just requires a bit of thought and patience.

    With the TronXY X3S you get a big build volume 330mm x 330mm x 400mm. Dual z-axis motors, a heated bed, bowden extruder and a machine that’s easy to upgrade.

    Apart from a few minor shortages of fasteners in the box, everything was well packaged and nothing was broken – not bad when it was shipped for free all the way from China.

    The assembly took about 8 hours spread out over a few evenings after work. As long as you pay careful attention to potential alignment issues with things like the z-axis motors, couplings and threads, all should be well. Some parts were pre-assembled – the hot-end and the extruder for example.

    From the outset, I’d always intended to install a mosfet for the heated bed, but I ended up also installing one for the hotend as well. There is enough room in the control box for both without too much difficulty.

    Once assembled, the first print of a 20mm cube was successful and the second print, a Benchy, turned out better that expected. Certainly good enough to print upgrade parts for the machine.

    I have now printed belt tensioners for the x and y axis which have improved the print quality. I’ve added a part cooling fan and an inductive sensor for the z-axis.
    Cons:
    When deciding to build a machine from a kit it is always important to set your expectations. Don’t expect a cheap kit to be subject to the best in quality control when it comes to small items being picked and packed.

    My kit was short of 4 t-nuts and a couple of m4 screws. Nothing to worry about and I had expected this to be the case.

    The only major problem that I found was the power output of the factory power supply. Not a problem if you only intend to print PLA with a low bed temperature but if you will want higher bed temperatures, you should consider upgrading this.

    The build surface that ships in the kit is the same material that circuit boards are made from – I had a few problems with adhesion, but it did work. I have experimented with printing onto glass, onto tape, using hairpsray, glue stick etc… I am now using an aluminium plate with a self adhesive build surface.
  • Andy

    Mar/13/2018 04:37:20
    Pros:
    Ein Super stabiles Gerät.
    Bis jetzt bin ich sehr zufrieden. Poste später noch mehr Bilder.
    Cons:
    Kann bis jetzt nichts sagen.
    Melde mich später nochmal.
  • Vadim

    Dec/23/2017 11:59:50
    Pros:
    1. Металлический профиль 2020
    2. большие размеры печати
    3. возможность печатать множеством пластиков

    Желательна доработка
    Cons:
    В моем экземпляре
    1.Наличие повреждений и церапин
    2. Нагревательный стол (t<63 C)
View More

Newsletter

Currency

Language

Copyrights ©2014-2018 GearBest.com All Rights Reserved.

Disclaimer:
● Please read and follow the user manual carefully before you assemble or operate the 3D printer.
● Modification and customization of the 3D printer are strictly forbidden. We will take no responsibility for any problems resulting from modifications.
● Always use the correct AC voltage for your region.
● Please do not place the 3D printer near flammable / combustible materials, or any heat sources.
● Use the 3D printer only in properly ventilated areas. Maintain a safe distance from the printer.


Main Features:
● Full mental extrusion, without missing step
● 300 x 300mm hot bed, big printing area
● Tronxy upgraded unlocking MK10 and stable extruder, quietness MK8 nozzle
● XYZ brass stepper motor, quietly and powerful
● 2004A intelligent monitor with LCD screen for easy operating
● Working condition: -5 - 40 Deg.C, humidity 20 - 80 percent
● Hot bed temperature: 40 - 110 Deg.C
● Printing support: SD card / USB

Specification

General

Brand: Tronxy
Type: DIY
Model: X3S
Frame material: Aluminium Extrusion
Nozzle diameter: 0.4mm
Nozzle temperature: 170-275 Degree
Product forming size: 300 x 300 x 400mm
Layer thickness: 0.1-0.4mm
LCD Screen: Yes
Print speed: 20 - 150mm/s
Supporting material: ABS,HIPS,PC,PLA,PVA,PVC,Wood
Material diameter: 1.75mm
Language: Chinese,English
File format: G-code,STL
XY-axis positioning accuracy: 0.012mm
Z-axis positioning accuracy: 0.004mm
Voltage: 110V/220V
Host computer software: Cura,Repetier-Host
Packing Type: unassembled packing
System support: XP, Win7, Mac

Dimensions and Weight

Product weight: 10.0000 kg
Package weight: 13.4700 kg
Product size: 52.00 x 49.00 x 49.80 cm / 20.47 x 19.29 x 19.61 inches
Package size: 58.00 x 38.00 x 19.00 cm / 22.83 x 14.96 x 7.48 inches

Packing Contents

Packing Contents: 1 x Tronxy X3S 3D Printer DIY Kit


Tronxy X3S Aluminum Frame High Precision LCD Display Screen 3D Printer DIY Kit
Tronxy X3S Aluminum Frame High Precision LCD Display Screen 3D Printer DIY Kit
Tronxy X3S Aluminum Frame High Precision LCD Display Screen 3D Printer DIY Kit
Tronxy X3S Aluminum Frame High Precision LCD Display Screen 3D Printer DIY Kit
Tronxy X3S Aluminum Frame High Precision LCD Display Screen 3D Printer DIY Kit
Tronxy X3S Aluminum Frame High Precision LCD Display Screen 3D Printer DIY Kit
Tronxy X3S Aluminum Frame High Precision LCD Display Screen 3D Printer DIY Kit
Tronxy X3S Aluminum Frame High Precision LCD Display Screen 3D Printer DIY Kit
Tronxy X3S Aluminum Frame High Precision LCD Display Screen 3D Printer DIY Kit
Tronxy X3S Aluminum Frame High Precision LCD Display Screen 3D Printer DIY Kit
Tronxy X3S Aluminum Frame High Precision LCD Display Screen 3D Printer DIY Kit

Tronxy X3S Aluminum Frame High Precision LCD Display Screen 3D Printer DIY Kit

Tronxy X3S Aluminum Frame High Precision LCD Display Screen 3D Printer DIY Kit





1501646388585577.jpg


1502163106272051.webp.jpg

Disclaimer:
1. Please read and follow the user manual carefully before you assemble or operate the 3D printer.
2. Modification and customization of the 3D printer is strictly forbidden. We will take no responsibility for any problems resulting from modifications.
3. Always use the correct AC voltage for your region.
4. Please do not place the the 3D printer near flammable/combustible materials, or any heat sources.
5. Use the 3D printer only in properly ventilated areas. Maintain a safe distance from the printer.
4.5
Price
Ease of Use
Build Quality
Usefulness
Overall Rating
  • Neil Warwick

    Apr/01/2018 16:55:43
    Pros:
    I wanted to get into 3D printing and I believe that the best way to learn about something is to build it. After all, if you understand how it works then you will be able to fix it if you have problems.

    It’s cheap! You get a box containing all of the bits needed to build a 3d printer much cheaper than buying all the bits individually. You don’t have to design anything because the manufacturer has done that for you, all you have to do is assemble it. Although you do need to have a basic competence in order to build it successfully, it’s not a nuclear submarine and just requires a bit of thought and patience.

    With the TronXY X3S you get a big build volume 330mm x 330mm x 400mm. Dual z-axis motors, a heated bed, bowden extruder and a machine that’s easy to upgrade.

    Apart from a few minor shortages of fasteners in the box, everything was well packaged and nothing was broken – not bad when it was shipped for free all the way from China.

    The assembly took about 8 hours spread out over a few evenings after work. As long as you pay careful attention to potential alignment issues with things like the z-axis motors, couplings and threads, all should be well. Some parts were pre-assembled – the hot-end and the extruder for example.

    From the outset, I’d always intended to install a mosfet for the heated bed, but I ended up also installing one for the hotend as well. There is enough room in the control box for both without too much difficulty.

    Once assembled, the first print of a 20mm cube was successful and the second print, a Benchy, turned out better that expected. Certainly good enough to print upgrade parts for the machine.

    I have now printed belt tensioners for the x and y axis which have improved the print quality. I’ve added a part cooling fan and an inductive sensor for the z-axis.
    Cons:
    When deciding to build a machine from a kit it is always important to set your expectations. Don’t expect a cheap kit to be subject to the best in quality control when it comes to small items being picked and packed.

    My kit was short of 4 t-nuts and a couple of m4 screws. Nothing to worry about and I had expected this to be the case.

    The only major problem that I found was the power output of the factory power supply. Not a problem if you only intend to print PLA with a low bed temperature but if you will want higher bed temperatures, you should consider upgrading this.

    The build surface that ships in the kit is the same material that circuit boards are made from – I had a few problems with adhesion, but it did work. I have experimented with printing onto glass, onto tape, using hairpsray, glue stick etc… I am now using an aluminium plate with a self adhesive build surface.
  • Andy

    Mar/13/2018 04:37:20
    Pros:
    Ein Super stabiles Gerät.
    Bis jetzt bin ich sehr zufrieden. Poste später noch mehr Bilder.
    Cons:
    Kann bis jetzt nichts sagen.
    Melde mich später nochmal.
  • Vadim

    Dec/23/2017 11:59:50
    Pros:
    1. Металлический профиль 2020
    2. большие размеры печати
    3. возможность печатать множеством пластиков

    Желательна доработка
    Cons:
    В моем экземпляре
    1.Наличие повреждений и церапин
    2. Нагревательный стол (t<63 C)
  • SantiAr

    Nov/23/2017 22:33:24
    Pros:
    Good 3d Printer. At the start allows very good prints, but the build needs to be really good.
    Good to print PLA, for ABS needs more power to the bed, in original state only can reach 70°.
    All metal frame
    Large print size
    Good hot end and extruder (all metal)
    Cons:
    For really good prints the printer needs many mods.
    The only fail I seen was that the printer arrived without essential parts like Z bracket and T-Nuts. Very bad control of Tronxy
    Slow Bed.
    PSU bad quality.
    The printer need a MOSFET.
View More
177 Cart0
Add to Cart buy now
Tronxy X3S Aluminum Frame LCD Screen  3D Printer DIY Kit

Tronxy X3S Aluminum Frame LCD Screen 3D Printer DIY Kit

$299.99

Warehouse Options

  • China
Tronxy X3S Aluminum Frame LCD Screen  3D Printer DIY Kit

Tronxy X3S Aluminum Frame LCD Screen 3D Printer DIY Kit

$299.99

Size

  • EU PLUG
  • US PLUG
  • EU PLUG
  • US PLUG

Color

  • BLACK
  • BLACK
Quantity 1
Instalment Choose Interest-free
cancel Done

tips

Orders placed with only interest-free products can enjoy %d times interest-free privilege,otherwise , the privilage will not be enabled.
Coupon
You've got your coupon!
Cancel
xArrival Notice

Once new stock arrives,we'll email you immediately!

  • *E-mail Address:

  • Validation Code: