Open our Cool Free APP!

Enjoy APP-Exclusive Deals.

Open APP
1/1

Tronxy X1 Desktop 3D Printer

Support SD Card Off-line Printing + LCD Display + High Precision 0.1 - 0.4mm
4.73 49 Reviews
$132.62

promotion:

If Cart Subtotal exceeds , you can buy 1 Special Add-On for .Discounts automatically applied to shopping cart before checkout.

warehouse

Ship between: Jul 23 - Jul 26
China
selected
GUN METAL AU PLUG

Customer Reviews

Jasen
Apr 05,2018 03:01:49
Pros:
I saw this printer reviewed on YouTube and decided to get one. It's not my first 3d printer ( I have a scratch built delta and had a prusa i3 clone that I scavenged to make the delta). I decided to get this printer to see what modern kits were like. it's really easy to assemble. I like V-rail. I use it in my workshop to make jigs and I have a CNC that I scratch-built from it. The Tronxy kit works just like the YouTube videos say it does. it's cheap and easy (and fast) to build. There are a few shortcomings, but with a little work, you can get a reliable printer for a very nice price. I have had very few failed prints (all while trying to print over USB), but I am experienced with printing. I've printed about 2kg of PLA with mine now...
Cons:
There is a design flaw in the gantry plate that makes the gantry too loose. I fixed it with a metal file. The Y carriage assembly was loose, but I was able to just tighten the wheels so it gripped the v-rail. most importantly, I received a bad power supply that melted itself. I will try to attach pictures. I didn't like how hot the power brick was getting, so I never left the printer unattended... good thing, the connector melted into the acrylic and the brick itself started to melt. I've since replaced the brick with a larger 12v 360w power supply that I had left from my old i3 clone, and used some anderson powerpole connectors (rated to 20 amps) overkill, I know, but it's what I had. the last con, though a small one, the print volume is... small... about a 6" cube. (14cm)... a little less actually. but if you just want to print some little PLA things and get into the world of 3d printing to see if it's for you, that's not a big deal.
Caverntwo
May 07,2017 04:13:37
Pros:
The printer arrived well packaged. The included SD-card contains a very good manual. No wiring of mains electricity is needed due to a closed PSU. The printer prints very nicely and accurate with no layer offset. The extruder and hot-end are very well-designed, already utilizing the Bowden-setup. Furthermore, the controller has outputs for both a heated bed as well as a part cooling fan, and the aluminum extrusions are of the European standard 2020 and 2040, allowing for possible future size upgrades (at least along the y- and z-axis). My printer arrived with 10m of black sample PLA.
Cons:
The most negative point of the build is the incomplete set of screws. In my case, the package lacked 8 plastic spacers, some 8mm M3 screws as well as a T-nut. Luckily, I could substitute all the missing parts. Furthermore, the printer has a lot of play, especially on the y-axis, which can luckily be fixed with some upgrades. The SD-card is not easily reachable, with an SD-extension cable helping a lot.
Sylvain
Jan 13,2018 18:06:11
Pros:
Great value fro the price, if you are not afraid to spend time and have to tinker a little bit. Nice first 3D printer, that may indeed be enough to fill your needs, or at least allow you to learn 3D printing at a budget before you get a bigger, more expensive printer. I needed an afternoon to put it together, however I lost time because of some little hardware issues. Assembly is not all, after it you need to do tests and settings tweaking, it will keep you busy for a few more hours !
Cons:
All the thingsI notice and that could be improved: The assembly instructions do not tell at all how to deal with the wire looms. There is not enough spiral cable sleeve provided, luckily I had some in stock (they should provide twice the amount, at least). Some small hardware issues like a missing screw and a butterfly nut that was NOT THREADED. Nothing too terrible if you have a stock of random screws and hardware. Pro tip: loose set screws on a belt pulley will give you a headache, make sure they are tight. The quality of the filament sample provided was catastrophic, the first test print ended in a shapeless blob of plastic... luckily things went a lot better with an other filament, still some tests and tuning to do but I printed my first half decent calibration cube.
View More

RECOMMENDED PRODUCTS

loading...
Click to description

Disclaimer:
● Please read and follow the user manual carefully before you assemble or operate the 3D printer.
● Modification and customization of the 3D printer are strictly forbidden. We will take no responsibility for any problems resulting from modifications.
● Always use the correct AC voltage for your region.
● Please do not place the 3D printer near flammable / combustible materials, or any heat sources.
● Use the 3D printer only in properly ventilated areas. Maintain a safe distance from the printer.

Tronxy X1 Desktop LCD Display 3D Printer

Description:
This 3D printer has 150 x 150mm x 150mm build volume, 0.4mm nozzle diameter. It is made from aluminum.

Main Features:
● Supports SD card off-line print, especially convenient when without a computer
● 0.1 - 0.4mm layer resolution, high precision
● 150 x 150mm x 150mm build volume
● 0.1 - 0.5mm layer resolution accelerates the design process
● LCD screen shows your printing information directly and easy for you to manipulate
● Enhanced stability and reliability: acrylic plate ensures more stable printing
● Supports 3D printing filaments: PLA, ABS
● Operating system: Windows XP / 7 / Mac

Specification

General

Brand: Tronxy
Type: Complete Machine
Engraving Area: 150 x 150mm x 150mm
Nozzle quantity: Single
Nozzle diameter: 0.4mm
Memory card offline print: SD card
LCD Screen: Yes
Supporting material: PLA
Material diameter: 1.75mm
XY-axis positioning accuracy: 0.012mm
Z-axis positioning accuracy: 0.004mm
Packing Type: unassembled packing
Certificate: CE,FCC,RoHs

Dimensions and Weight

Product weight: 3.5000 kg
Package weight: 4.8200 kg
Product size: 34.00 x 36.50 x 35.00 cm / 13.39 x 14.37 x 13.78 inches
Package size: 32.70 x 29.70 x 15.20 cm / 12.87 x 11.69 x 5.98 inches

Packing Contents

Packing Contents: 1 x Desktop 3D Printer

Limit switch

3

DC power jack

1

Flat screwdriver

1

Cross screwdriver

1

Hex wrenches

1

Binder clip

2

12V 5A adaptor

1

Bed frame ( acrylic )

1

Fiberglass board

1

Printing bed plate ( acrylic )

1

Base frame ( acrylic )

1

Electronic box top plate ( acrylic )

1

Electronic box back plate ( acrylic )

1

Electronic box bottom plate ( acrylic )

1

Electronic box front plate ( acrylic )

1
LCD cable
1

Electronic box side plate ( acrylic )

2
Z-motor seat
1

Card reader & micro SD card

1
USB cable
1
X-motor mount ( acrylic )
1
X-ais & Y-axis motors ( with pulley )
2
Extruded bracket
1
Timing belt x 2pcs
Winding pipe
Cable tie
1
Motor wire
4
Handle
1
Z-axis motor ( with coupling )
1
Power cord
1
Extruder ( assembled )
1
Mainboard
1
Extrusion kit
1
Aluminum profiles 2020 * 70mm x 1pcs
Aluminum profiles 2040 * 285mm x 1pcs
Aluminum profiles 2040 * 250mm x 1pcs
Aluminum profiles 2020 * 310mm x 1pcs
4
Wheel x 6pcs
2020 corner bracket x 2pcs
Copper nut x 1pcs
1
Extrusion motor ( with gear )1
Belt pulley kit
2
Screws kit1
LCD display ( assembled )
1
Small acrylic kit1
Threaded rod
1



Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.








Disclaimer:
1. Please read and follow the user manual carefully before you assemble or operate the 3D printer.
2. Modification and customization of the 3D printer is strictly forbidden. We will take no responsibility for any problems resulting from modifications.
3. Always use the correct AC voltage for your region.
4. Please do not place the the 3D printer near flammable/combustible materials, or any heat sources.
5. Use the 3D printer only in properly ventilated areas. Maintain a safe distance from the printer.

  • All (49)
  • Photos (27)
  • Videos (12)
4.73 *****
Jasen
Apr 05,2018 03:01:49
Pros:
I saw this printer reviewed on YouTube and decided to get one. It's not my first 3d printer ( I have a scratch built delta and had a prusa i3 clone that I scavenged to make the delta). I decided to get this printer to see what modern kits were like. it's really easy to assemble. I like V-rail. I use it in my workshop to make jigs and I have a CNC that I scratch-built from it. The Tronxy kit works just like the YouTube videos say it does. it's cheap and easy (and fast) to build. There are a few shortcomings, but with a little work, you can get a reliable printer for a very nice price. I have had very few failed prints (all while trying to print over USB), but I am experienced with printing. I've printed about 2kg of PLA with mine now...
Cons:
There is a design flaw in the gantry plate that makes the gantry too loose. I fixed it with a metal file. The Y carriage assembly was loose, but I was able to just tighten the wheels so it gripped the v-rail. most importantly, I received a bad power supply that melted itself. I will try to attach pictures. I didn't like how hot the power brick was getting, so I never left the printer unattended... good thing, the connector melted into the acrylic and the brick itself started to melt. I've since replaced the brick with a larger 12v 360w power supply that I had left from my old i3 clone, and used some anderson powerpole connectors (rated to 20 amps) overkill, I know, but it's what I had. the last con, though a small one, the print volume is... small... about a 6" cube. (14cm)... a little less actually. but if you just want to print some little PLA things and get into the world of 3d printing to see if it's for you, that's not a big deal.
Caverntwo
May 07,2017 04:13:37
Pros:
The printer arrived well packaged. The included SD-card contains a very good manual. No wiring of mains electricity is needed due to a closed PSU. The printer prints very nicely and accurate with no layer offset. The extruder and hot-end are very well-designed, already utilizing the Bowden-setup. Furthermore, the controller has outputs for both a heated bed as well as a part cooling fan, and the aluminum extrusions are of the European standard 2020 and 2040, allowing for possible future size upgrades (at least along the y- and z-axis). My printer arrived with 10m of black sample PLA.
Cons:
The most negative point of the build is the incomplete set of screws. In my case, the package lacked 8 plastic spacers, some 8mm M3 screws as well as a T-nut. Luckily, I could substitute all the missing parts. Furthermore, the printer has a lot of play, especially on the y-axis, which can luckily be fixed with some upgrades. The SD-card is not easily reachable, with an SD-extension cable helping a lot.
Sylvain
Jan 13,2018 18:06:11
Pros:
Great value fro the price, if you are not afraid to spend time and have to tinker a little bit. Nice first 3D printer, that may indeed be enough to fill your needs, or at least allow you to learn 3D printing at a budget before you get a bigger, more expensive printer. I needed an afternoon to put it together, however I lost time because of some little hardware issues. Assembly is not all, after it you need to do tests and settings tweaking, it will keep you busy for a few more hours !
Cons:
All the thingsI notice and that could be improved: The assembly instructions do not tell at all how to deal with the wire looms. There is not enough spiral cable sleeve provided, luckily I had some in stock (they should provide twice the amount, at least). Some small hardware issues like a missing screw and a butterfly nut that was NOT THREADED. Nothing too terrible if you have a stock of random screws and hardware. Pro tip: loose set screws on a belt pulley will give you a headache, make sure they are tight. The quality of the filament sample provided was catastrophic, the first test print ended in a shapeless blob of plastic... luckily things went a lot better with an other filament, still some tests and tuning to do but I printed my first half decent calibration cube.
Very good Printer
Jun 20,2018 10:00:21
Pros:
A very good 3d Printer. Easy to assemble, and with only 3 self-printed upgrades - you can produce very great prints! I'm really happy with it. I bought it as my third printer to print just PLA and wil ltune it for this material.I wnat to give everything 5 stars but the page doesn't let me, it seems like a bug, so please, see this as a full-5-star-rating!
Cons:
No cons so far :) Got lots of Screws left but thats better than having too less :D
Daniel
Mar 07,2018 11:08:50
Pros:
This is a realy nice 3D Printer and in someway unbeatable for this Price. A whole new world opens if you mod some of the parts. Read my review vor more information. https://steemit.com/technology/@danielh/tronxy-x1-the-100usd-3d-printer-review
Cons:
Not so much. The external control box is a bit odd. But witch a nice case mod the Printer can be a good locking printer tower.
Scott
Feb 14,2018 00:17:03
Pros:
Setup in under 4 hours.Cabling to control box easy to tidy Very nice to assemble, parts do not break12v power supply and no hot bed reduce amount of cables Quiet After printing upgrades, is a good quality printer Everything green in the images has been printed on this printer
Cons:
No heated bed Some wobble on z axis, solved by printing upgrades Needs around 20 small parts to be printed to get good quality prints
ricardo
May 01,2018 16:14:07
Pros:
3d print ready, but needs to print some upgrade parts to improve print qualitysmall footprint, but with 15cm X 15cm to print, witch for me is suficientGood qualityI bought a glass bed, that is way better that the acrilich sheet It comes with
Cons:
nothing for the price
Ozziemandias
Jan 17,2018 08:13:11
Pros:
Everything was OK except shipping. I do not recommend EU standard railway shipping method. 1. Ease of use 2. Ease of build 3. Good, detailed build instructions
Cons:
None, except shipping. I do not recommend EU standard railway shipping method. As i wrote in Pros: 1. Ease of use 2. Ease of build 3. Good, detailed build instructions
Tronxy X1
Mar 26,2018 13:53:38
Pros:
This is my first 3d printer. I like the fact that it is quite small. It was quite easy to assemble it (the instructions are clear and not at piece was missing) The price is super!! I manage to get an impressive calibration cat as first printing.
Cons:
At this price there are no cons! It works without problems, but for better result it needs some improvment. (tensioner for the belts and improvment for the hotend)
PrintSoloArmy
Feb 10,2017 19:17:00
Pros:
Amazing product took 30 minutes to build as i have experience with multiply kinds of printers, prints amazingly, can use abs and wood filament but i advice you use PLA :), works better when you print custom pulleys
Cons:
nothing so far :)
View More
View More
View More
New Member's Bonus: $50 Coupon
Save Cart

Tronxy X1 Desktop 3D Printer

$132.62

color

size

Quantity - +
installments: choose
loading...
loading...
Cancel
loading...
loading...
loading...