Beelink Mini PC Flash Sale post banner

Fix X92 TV box & remote control doesn't work issues

ByAdeline Belluz 2017-12-05 4979

If your X92 TV box or the TV box's AV connector, remote control doesn't work, follow this short guide to solve the problems.

X92 TV box

1. The X92 TV box doesn't work.

Please try again with another effective HDMI cable. If it still doesn't work, you should update the X92 TV box. Here are the steps for updating:

 

● Update the TV box. Firstly, you should better format the SD card, then copy the update firmware into the root file of your SD card and insert the card into your device. Use a pin to press and hold the button in AV hole and power on the TV box. Leave the power button until update page appears. After that, the X92 will update automatically.

 

● If the TV box doesn't work after updating, the device needs to flash, download the ROM firmware here.

 

● If above solutions cannot solve the problem, please consult the after-sale service.


2. The X92 TV box's remote controller doesn't work.

● Check if you have installed the battery correctly and make sure the battery in the remote controller is new.

 

● Operate the controller directly in front of remote controller receiver (The effective angle of the infrared remote control is about 45-60 degrees, and the effective receiving angle of the remote control receiver of the machine is about 30-45 degrees.).

 

● If above methods still don't work, you could use your phone's camera to shoot remote control's launch lamp and press any button of the remote control. If you can see a flash light through the camera, the controller is ok, the machine's remote control receiver is broken. If you cannot see a flash light, indicating that the remote control is broken, please contact the aftersale service.

 

 
  Super savings at Today's Top Coupons - UP TO $12 OFF.

  Find a mobile with up to 50% off discount at Weekly Savers - 50% OFF BRAND PHONES.
 

 


3. The X92 TV box got a blue screen after clicking Kodi.

● Please restore the TV box to factory setting in the system settings.

 

● If you still got a blue screen, flash the TV box with the ROM firmware.

 

● If the flash doesn't fix the problem, that means the X92 TV box has hardware malfunction, please contact the aftersale service.


4. The AV connector of X92 TV box doesn't work.

Please exchange the AV connectors and change your TV into AV mode. If it still doesn't work, you should contact the aftersale service as the AV connector is broken.


For Gearbest customers: If you've purchased X92 TV box from us and still has problem, please do not hesitate to get in touch with us. Just fill in the ticket with your questions at our Support Center and send it to us. We will do our best to deal with your problem as soon as possible.

 


Gearbest Daily deals up to 69 percent off

You might also like

HOT TOPICS

Related Products