BySteve Lowry 2018-10-02 8046
There is a setting in CURA that allows you to adjust the bond strength between the outline and the fill. Click "Tools - Open Expert Settings – Infill overlap (%)". This value is based on the percentage of your extruded wire width, so it is easy to expand and adjust for different nozzle sizes.
For example, if you set a 20% overlap, this means that the software will command the printer. The fill will overlap 15% with the outermost edge. This overlap helps to ensure that the two parts are strongly bonded. For example, you used 15% overlap before, try increasing to 20% to see if the gap between edge and fill disappears.
Your print fills parts too much faster than the outline. If the fill is printed too fast, it will not have enough time to adhere to the outer contour. If you try to increase the overlap of the outline but still see the gap between the outline and the fill, then you need to reduce the print speed.
You can modify the infill-print speed in Advanced. For example, 30mm/s to see if there is any improvement. Try twice or more times to find the best result.
|You may also want to read:|
|3D printer grinding filament solution|
|How to deal with the 3D printer nozzle jam|
|Solution for stopping extrusion in the middle of 3D printing|
|How to solve cracking or breaking of layers during 3D printing|
● Over 300,000 products
● 20 different categories
● 15 local warehosues
● Multiple top brands
● Global payment options: Visa, MasterCard, American Express
● PayPal, Western Union and bank transfer are accepted
● Boleto Bancario via Ebanx (for Brazil)
● Unregistered air mail
● Registered air mail
● Priority line
● Expedited shipping
● 45 day money back guarantee
● 365 day free repair warranty
● 7 day Dead on Arrival guarantee (DOA)