Setting the SSID and password for the DJI Spark Wi-Fi connection

Changing the name of the SSID access point and the Wi-Fi password of the DJI Spark is a simple operation, which requires only a few steps, through the use of the DJI GO 4 app. First we see when you need to set up the Wi-Fi SSID and password of the DJI Spark, and then all the steps to set up the data for the Wi-Fi connection of the DJI Spark

When to reset the SSID and password of DJI Spark?

● To customize the network name and password for accessing your Wi-Fi connection the first time you use it, to replace the factory settings you have set

● If your Android mobile device supports a maximum of 2.4GHz and the Wi-Fi of the DJI Spark drone is not present in the menu of available networks, present on your smartphone

● If you have forgotten your password to access the Wi-Fi network of the DJI Spark drone

How to reset Reset WiFi SSID and DJI Spark password?

Method 1: Change the WiFi SSID and password of the DJI Spark by power button

Step 1: Press and hold the power button for 9 seconds, during which the drone will be emitting sounds, in the following sequence: 1 beep, 2 consecutive beeps and 3 consecutive beeps.

Step 2: At this point, the SSID network identifier and password have been reset to the factory settings, whose coordinates can be found directly on the DJI Spark.

Step 3: Check the original SSID network name and password of the DJI Spark, set from the factory, in the DJI Spark's battery compartment or in the drone's purchase box

Method 2: Change the WiFi SSID and password of the DJI Spark by smartphone

Step 1: Connecting the DJI Spark drone to your smartphone

Step 2: Select Go Fly to enter the room of the DJI Spark

Step 3: Select the settings icon located at the top right of your smartphone monitor

Step 4: On the General Settings tab, select the Wi-Fi network icon to enter the network connection settings, where you can change the SSID network identifier s and access password.

Step 5: Select the Wi-Fi SSID item of DJI Spark

Step 6: in the pop up at the request Change Wi-Fi SSID, in the dedicated space, enter the new network name, select OK to confirm the change of the network name of DJI Spark

Step 7: Select the Wi-Fi Password item of the DJI Spark

Step 8: in the pop up at the request Change Wi-Fi Password, in the dedicated space, enter the new network name, select OK to confirm the change of the Internet password of DJI Spark

Step 9: After setting the new SSID and internet password of DJI Spark, select Apply, to finalize the new Wi-Fi connection settings of DJI Spark

Step 10: To make the changes operative, it is necessary to turn off and turn on the radio control of the DJI Spark again.

Through the use of the DJI GO 4 app and these few steps, you've learned how to change your connection access data with the SSID network name setting and the password for the DJI Spark Wi-Fi connection.

	Extensive Product Selection ● Over 300,000 products ● 20 different categories ● 15 local warehosues ● Multiple top brands		Convenient Payment ● Global payment options: Visa, MasterCard, American Express ● PayPal, Western Union and bank transfer are accepted ● Boleto Bancario via Ebanx (for Brazil)
	Prompt Shipping ● Unregistered air mail ● Registered air mail ● Priority line ● Expedited shipping		Dedicated After-sales Service ● 45 day money back guarantee ● 365 day free repair warranty ● 7 day Dead on Arrival guarantee (DOA)