ByGB Blog Official 2018-07-03 8258
The correct amount of humidity (Humidity - Wikipedia) is one of the most important factors for healthy living. This has seen a steady rise in demand for humidifiers from many families and even companies. At the time of writing, the Water-drop Ultrasonic Humidifier (available on GearBest) is one of our hottest selling humidifiers on Gearbest, with exceptionally positive feedback.
However, some customers have requested advice on correct usage. In response, we have prepared this short Water-drop Ultrasonic Humidifier operation guide on how to get the most out of your Water-drop Ultrasonic Humidifier.
Step 1. Unscrew and remove the humidifier cap, and add water into the tank (80% is sufficient).
Step 2. Use the original USB cable to connect the humidifier to your computer or an USB port charger.
Step 3. Press the left light button to turn on the LED light. The red light will light up. If the LED light doesn't light up:
● Check the connection between your computer and the humidifier.
● Use a spare USB cable.
Step 4. Screw the cap back on (ensure it is not too tight).
● Locate the 2nd and 3rd screws on the cap (there are four screws in total).
● Loosen both the screws slightly.
● Align the two screws with the two metal touch points on the lower body and then connect them together.
Important: do not connect the 1st and 4th screws to the metal touch points. Our Ultrasonic Humidifier operation guide only needs the 2nd and 3rd screws.
Step 5. Press the right Power button to turn on the humidifier. Wait for several minutes, then the humidifying mist stream will flow from the cap.
If no mist comes out, re-try step 4 above, making sure the correct two screws are making a solid contact with the metal touch points.
Note: if following all of the above steps in our Ultrasonic Humidifier using guide are not successful, please kindly send us a video or a YouTube video link.
In the video, be sure to show the following points clearly:
1. The LED light has turned on.
2. The 2nd and 3rd screws have been loosened.
3. The 2nd and 3rd screws are perfectly aligned and connected to the metal touch points.
We hope you have found this Water-drop Ultrasonic Humidifier user manual useful, and managed to get your Water-drop Ultrasonic Humidifier up and running as intended. For any problems, please do not hesitate to contact our after-sales service, we will endeavor to solve your problem as soon as possible. Thanks for your support!
For the purpose of this new article, the featured image(s) were sourced from the internet. For any issue, please contact us, and we will deal with the matter promptly.
i12 TWS Earbuds Pairing Problem Fix Guide