ByJoe Horner 2019-10-15 20618
Earphones are supposed to be used as a pair but Pamu Slide is updated the both earbuds can be used alone, which offer more convenience as per the audio-devices lovers.
●Step 1: Turn on the pairing mode of the Pamu Slide earbuds
Method 1: Take out the earphones from the stand, they will and start up automatically and enter the pairing mode(make sure the stand is charged).
Method 2: Touch the button of the earphone to turn it on (the earphones must not be in the charging case and must be off).
●Step 2 : Pairing of the main earphone:
Turn on your phone's Bluetooth, search for "PaMu Slide" in the available devices list, and click on it to complete the main earphone.
1. If you're using Apple devices, the volume is set only through the phone, making sure your volume setting on the phone is appropriate.
2. If you're using Android system, the volume setting is separately from the phone and the earbubs, make sure the volume setting is between 20%-80% on the phone and then press long the left earbud is decreasing the volume, press long the right earbud is increasing the volume.
Click here to get the volume control manual of PaMu Slide.
1.Delet pairing : Open the settings in the phone and delete pairing( PaMu Slide).
2.Reset the default: Putting earbuds in the case ( Make sure the red light is on. If LED light is off, the operation is invalid. In this situiation, Earbuds should be taken out of the case and placed more than 3 minutes, then put them back to the case and ensure they are charging with red light), Press and hold both sides to get both earbuds flash red and white at the same time, indicating that the factory reset is successful.
3.Pair between two earbuds:Pick two earbuds out, Quickly double click both sides to get both earbuds fast flash red and white in a fast frequency. Put two earbuds as close as possible, When pairing, the left side flashing red and white slowly, the right side blinking white slowly.
Whether the above is successful, depends on if the left side are flashing red and white slowly, the right side are flashing white slowly. if not, please repeat steps 2 and 3.
Reverse wireless charging is a major feature of PaMu Slide headphones, but 2000mAh batteries are limited, destined to give mobile phones emergency charging, can not be used as a conventional mobile power supply. Using Xiaomi 9 mobile phone wireless charging test, the maximum current is 680mA, charging speed is less than half of the original fast charge, but as a new feature to taste fresh or impressive.
If the wireless charging function of the PaMu Slide is not available, first check that it has enough power, and if the power is insufficient, you need to charge the PaMu Slide first.
In addition, the, PaMu Slide can only be used as an emergency charge for mobile phones, and cannot be used as a conventional mobile power supply.
|You may also want to read:|
|How to Control the Volume of PaMu Slide Earbuds?|
|PaMu Slide Earbuds Gestures Instructions: How to Use it?|
|How to Reset or Restore Factory the Padmate PaMu Slide Earbuds?|
|(Latest) PetMate PaMu Slide Review: TWS Earbuds with Reverse Wireless Charging|
● Over 300,000 products
● 20 different categories
● 15 local warehosues
● Multiple top brands
● Global payment options: Visa, MasterCard, American Express
● PayPal, Western Union and bank transfer are accepted
● Boleto Bancario via Ebanx (for Brazil)
● Unregistered air mail
● Registered air mail
● Priority line
● Expedited shipping
● 45 day money back guarantee
● 365 day free repair warranty
● 7 day Dead on Arrival guarantee (DOA)