ByGB Blog Official 2018-07-03 2059
Bearings are what allow skateboard to turn, slide, and flip on the axle of the wheel. Board bearing, as a fundamental part of skateboard, connects the wheels to the main part of the board.
Even though bearings are small, don’t be fooled! They play a huge part in how fast and how smooth you skate.
If you are serious about getting a proper bearing to suit your needs, you should have a rough idea of how they work and their features.
Before you choose skateboard bearing, you first need to get a basic overview.
In general, most skateboards, roller and inline skates use a standard 608 size bearing with an 8mm bore, 7mm thickness, and 22mm diameter, and have seven or eight steel or ceramic balls each in the interior.
Bearings help reduce the friction so skaters can turn corners, glide in curves and flip in the air with little effort.
The Annular Bearing Engineering Committee (ABEC) is a group that rates bearings around the globe.
ABEC measures efficiency and is the most commonly used bearing rating system. The higher the ABEC rating, the smaller the permissible tolerance, the greater the precision in making the bearing.
|ABEC-1|| Least precise and least expencive |
|ABEC-3|| Most found in entry-level budget |
May not roll or smoothly
|ABEC-5|| Typically found in fitness and recreational inline skates |
Reasonanble speed at reasonable cost
|ABEC-7|| Smooth and fast at acceptable price |
Most common skaters use
|ABEC-9|| Delicate and easily damaged |
Most fit for high-speed motor
Because smooth bearings reduce friction significantly, which has an influence on speed, many skaters mistakenly believe that they should get the bearings with the highest ABEC ratings. Understand the ratings
When choosing ABEC rated bearings, keep in mind that the effect of a higher rating on speed is somewhat limited because this rating system was engineered with high-precision equipment, not skateboard or roller skates.
Even the very fastest skaters do not generate enough RPM that is equal to a motor at speed of 2000 - 3000 rpm.
In addition, steel sealed bearings are the most common used in skating. Sealing design, on one hand, can protect against both water and grime, but it can also last a long time without maintenance.
Steel bearing normally are equipped with seven or eight ball bearings to reduce both the load on the bearing and overall friction between the wheel and road. They are lower in price than other types of bearings, and perfect for recreational and beginner skaters.
No matter what variety and rating of bearings you choose, you should choose according to your skill and needs.
With the right bearings on your skateboard, you can twist, turn, and perform various tricks smoothly and easily.
|You may also want to read:|
|All you need to know about your fidget spinner bearings|
For the purpose of this new article, the featured image(s) were sourced from the internet. For any issue, please contact us, and we will deal with the matter promptly.
Xiaomi AMAZFIT GPS sports smartwatch FAQ
How to Pairing SONY WF-1000XM3 with iPhone?