ByNiki Jones 2018-12-21 23228
Xiaomi Body Fat Scale
30 x 30cm
30.00 x 30.00 x 1.50 cm / 11.81 x 11.81 x 0.59 inches
5 - 150kg
Unit of weight
jin / kg / lb
Scale diversion valve
0 - 40 Deg.C
4 x AAA battery
5kg-50kg：maximum 0.15kg （150g,0.3jin,the scale is 0.1 kg）
Please open the battery storage lock under the body fat scale, as shown in the figure, just put the battery in accordance with the positive and negative poles;
The device of Android system 4.4 with Bluetooth 4.0 and the device of iOS 8.0 or above version.
Note: It supports the function of holding the baby for weighing, and only records the baby's weight without body fat analysis. (the link of Xiaomi MI Fit App is for Android phones, and the link of Xiaomi MI Fit App is for iPhones)
Open Xiaomi MI Fit App >click "my" > select "sports target" > select "reset" to modify.
The scale can store more than 500 groups of complete users’ weighing information, including weighing time, weight value, etc, and the cycle coverage starts from the first record after the storage is completed.
Keep the measurement at the same time and under the same conditions every day, basically the measurement data will not fluctuate too much; If the difference is very big, it is recommended to put it on a flat and hard ground and reinstall the battery of the body fat scale.
(1) If the binding fails, please try to stand on the body fat scale before binding;
(2) Restart the Bluetooth of the mobile phone before binding again;
(3) Rebind the phone after restarting it;
(4) When the battery of body fat scale runs out of power, it may be unable to bind. Please change the battery of body fat scale and then bind again.
(note: if you have attached other mobile phones, and the previously bound mobile phone is right beside you, you can try to turn off the Bluetooth of the previous mobile phone and try again.)
Open Xiaomi MI Fit App > click the big circle > select "remember weight" button. Select the corresponding weight value at will.
Open Xiaomi MI Fit App> click big circle > select "delete" button.
Open the Xiaomi MI Fit App > select "my" interface > select " Xiaomi body fat scale" > click "unbind" > select"continue to unbind" > bind successfully.
If the data cannot be synchronized to the Xiaomi MI Fit App, please try the following methods:
(1) Please light up the screen on the body fat scale and then open the Xiaomi sports APP for data synchronization;
(2) Open Xiaomi MI Fit App, then scale up, and then scale down after the weight value flashes for two times.
If you still cannot synchronize, please try to turn on Bluetooth again and then synchronize according to the above method.
Please switch on the phone Bluetooth to try, then restart the phone to try, and finally reinstall the body fat scale battery to try.
(note: iOS phones can be unpaired by setting Bluetooth, and then try firmware upgrade after matching again.)
(1) It doesn’t need to charge, just install the built-in Nanfu AAA alkaline battery;
(2) Under the condition of full power, it can be used for about 8 months by measuring 3 to 4 times a day. The standby time will vary due to the different usage of each person.
Open Xiaomi MI Fit App > click the big circle on the homepage >click the button on the upper right corner, and share it to WeChat, Weibo, QQ and other software.
When weighing, the "L" pattern flashes to indicate low battery power. Please replace the battery in time;
When weighing, the "OL" pattern flashes, indicating that the weight exceeds the maximum range of 150kg.
(note: the process of testing body fat and upgrading firmware is shown in the form of progress bar)
This situation is generally caused by the exhaustion of battery power, please try to replace the battery in time.
People's weight may fluctuate in a small range throughout the day. The algorithm adopted by body fat scale will filter out invalid weight changes caused by internal water or the weight of food itself, and retain more reference data. It is recommend to weigh before meal each morning.
The sensor of Xiaomi body fat scale is highly sensitive. When measuring, the body fat scale should be placed on a solid and flat ground. If the ground is not flat or placed on soft ground such as blankets and foam, the data will be inaccurate and there will be differences.
|You may also want to read:|
|Xiaomi body fat scale troubleshooting|
|How to bind Xiaomi Body Fat Scale with Xiaomi app Mi Fit|
|Decathlon | Xiaomi Bluetooth smart body fat scale|
Xiaomi Mi band 3 user guide