Xiaomi Mijia Xiaobai IP Smart Camera Android phone & iPhone connection guide

ByLinky Johnson 2019-06-18 1014

Xiaomi products have always been favoured by consumers, and basically all household products are affected. Many people who buy Xiaomi Mijia Xiaobai IP camera turn to the connection problem. Mijia Xiaobai Smart Camera is a bidirectional connection between Android phones and Apple phones. The following is a detailed tutorial.

Android phone connection

1.First, you need to connect your mobile phone to your wireless hotspot at home and download a Xiaomi Smart Home app (requires the latest version of Smart Home. If you already have an app, check that it is the latest version. If not, please upgrade to version 3.7.17 and above. (Smart Home Personal Center - the version number below in the settings).

2.Turn on the white device (you must use the white standard 5V2A or the branded 5V2A power supply). After switching on, the white indicator lamp lights up constantly orange. After about 10 seconds, the orange display will flash and the voice will say "I If Xiaobai, please open Xiaomi Smart Home".

3.Open the "Millet Smart Home" -APP is displayed (the phone must be connected to WIFI during the connection process.) There is a recognition device ---- Click OK --- Connect to WLAN --- Enter password --- Next.

Comments: Special instructions --- Some users indicate why no connection can be established, or that the password is always incorrect. Check the following reasons:

● Currently WIFI only supports 2.4G, please choose 2.4G Hotspot.

● WIFI cannot have a password. Please specify the password for the WIFI hotspot and then establish a connection (i.e. it is not supported not to enter a password).

● Many users use the millet router, but hide the hotspot, do not try to hide.

● Please keep the password you entered. If the wrong password has been entered and the connection fails and the password is still wrong after re-entering it, press the reset button at the bottom of the white portion to respond to the factory settings and exit the APP to add the connection again.

● Please confirm whether the security encryption mode of the WIFI hotspot is WPA2 PSK or WPA \ WPA2 PSK. If not, you can make the settings via the router.

If there is no direct pop-up window for adding devices, you can click on the Smarthome page in the upper right corner of my device + number. Select the device you want to connect. Click on the Mi Jia Xiaobai device. Enter the password ---- the next step.

4.Next step to start the connection progress display and Xiaobai will receive a voice message. After the connection is established, a selection of the usage scene is displayed and the selected scene can be clicked.

Note: Here are some points to consider.

● If the white connection requests the connection successfully and the mobile phone displays the connection error or the connection time limit, terminate the mobile phone, clear the APP cache in the application for the mobile phone system and open the APP list interface. Determining the connection indicates that the connection was successful (this is because the device's cloud synchronization phone is not successful, but the device was successfully connected).

● When the connection progress reaches 99% and lasts about 30 seconds, please do not worry. At this time, you can contact the camera's voice prompt. The camera may establish a successful connection. During the restart, the connection is successfully established after the restart.

● When the connection is established, the white indicator light flashes from orange to blue. When the connection is established, the blue control lamp lights up.

5.After connecting, check for a new firmware version and update the firmware version to ensure proper operation. Personal Center --- Check for updates ---- Update now.

Note:

● Please make sure that the network status is stable and good during the update process.

● When the upgrade progress reaches 99%, please wait patiently until the reboot is complete and the connection is successful.

Apple mobile phone connection

1.You also need to connect your mobile phone to your WLAN hotspot at home and download a Xiaomi Smart Home app (requires the latest version of Smart Home. If you already have an app, check that it is the latest version. If not, please upgrade to version 2.5.4 and above. (Smart Home Personal Center - the version number below in the settings)

2.Turn on the white device (you must use the white standard 5V2A or the branded 5V2A power supply). After switching on, the white indicator lamp lights up constantly orange. After about 10 seconds, the orange display will flash and the voice will say "I If Xiaobai, please open Xiaomi Smart Home".

3.Open the APP "Millet Smart Home" My Device Interface --- Add in the upper right corner (the mobile phone must be connected to WIFI during the connection process) ---- Select Mijia Xiaobai Camera --- Connect to WLAN --- Enter Password --- Next - to set up WIFI ---- At the beginning of WIFI click WIFI ---- Return to Smart Home --- Status display ---- Start the experience.

Comments: Special instructions --- Some users indicate why no connection can be established, or that the password is always incorrect. Check two reasons:

● Currently WIFI only supports 2.4G, please choose 2.4G Hotspot.

● WIFI cannot have a password. Please specify the password for the WIFI hotspot and then establish a connection (i.e. it is not supported not to enter a password).

● many users use the millet router, but hide the hotspot, do not try to hide.

● please keep the password you entered. If the wrong password has been entered and the connection fails and the password is still wrong after re-entering it, press the reset button at the bottom of the white portion to respond to the factory settings and exit the APP to add the connection again.

● please confirm whether the security encryption mode of the WIFI hotspot is WPA2 PSK or WPA \ WPA2 PSK. If not, you can make the settings via the router.

4.When reading the above progress, a white voice message is displayed. Use the voice announcement of the small white device as the connection result.

Note:

● If the white connection requests the connection successfully and the mobile phone displays the connection error or the connection time limit, terminate the mobile phone, clear the APP cache in the application for the mobile phone system and open the APP list interface. Determining the connection indicates that the connection was successful (this is because the device's cloud synchronization phone is not successful, but the device was successfully connected).

● When the connection status reaches 99% and the connection is interrupted for about 30 seconds, you can contact the camera's voice prompt. The camera may establish a successful connection. During restart, 100% is displayed when resetting until the connection is successfully established.

● When the connection is established, the white indicator light flashes from orange to blue. When the connection is established, the blue control lamp lights up.

5.After connecting, check for a new firmware version and update the firmware version to ensure proper operation. Personal Center --- Settings ---- Update now.

Note:

● Please make sure that the network status is stable and good during the update process.

● When the upgrade progress reaches 80%, please wait patiently for the reboot to complete. 100% is displayed until the restart is complete.

 You may also want to read:
 Roborock S6 vs Roborock S5: performance and hardware updates
  Powerbeats Pro vs. AirPods 2 vs. Samsung Galaxy Buds vs. Xiaomi Mi AirDots Pro: how to choose the perfect true wireless earbuds?
  new Dell XPS 15 (7590): price, specs, features and launch date

 

Gearbest Shopping on Gearbest

 

Extensive Product Selection

● Over 300,000 products

● 20 different categories

● 15 local warehosues

● Multiple top brands

Convenient Payment

● Global payment options: Visa, MasterCard, American Express

● PayPal, Western Union and bank transfer are accepted

● Boleto Bancario via Ebanx (for Brazil)

Prompt Shipping

● Unregistered air mail

● Registered air mail

● Priority line

● Expedited shipping

Dedicated After-sales Service

● 45 day money back guarantee

● 365 day free repair warranty

● 7 day Dead on Arrival guarantee (DOA)

You might also like

HOT TOPICS

Related Products