$302.83
4.9
10 Reviews
SKYSTARS G730L FPV Racing RC Drone with F4 FC Runcam Micro SWIFT 2 Camera - Black PNP
Coupon:
Promotion:
Support COD payment Warehouse & Fee
SelectCN-099:Ship between: Feb 03 - Feb 05
Product Options
SelectBlack PNP
Reviews (10) View More
Md.Alan Habri
Jan 24,2019
- Components i skip to install-lost alarm buzzer/side acrylic plate/led, will fly for about 10 packs then i'll decide to put the rest of the components. Flies good out of the box-just put in my rate. came with BF3.5.2 Same FC with the Skystars Stx225 ( follow build guide from Andy RC's you tube channel) easy connection, im on crossfire nano hook it up at tx3/rx3. smart audio on tx6, bolt that goes into the standoff i changed to abit longer for extra grip. overall frame quite stiff, dont know if it hold up on crashes ( well, i never plan to crash anyway). Im happy for quality considering the cheaper price. cruising with runcam 3s about 5mins steady flight (not aggresive on 4S lipo only). i switch to other hole for camera mounting screw because i dont want the lens to protrude out yet to change to GoPro lens (longer). i use my own rubber standoffs for vibration dampening.
Discussion
View More
Description
Specifications:
Frame Kit
Wheelbase: 300mm
Arm Plate Thickness: 4mm
TOP and Bottom Plate Thickness: 2mm
Side Plate Thickness: 2mm
Material: 3k Carbon Fiber
Flight Controller
Micro F4 Flight Control Board ( D-Shot Version )
MPU: 6000
CPU: STM32F405RGT6
Input Voltage: 2 - 6S LiPo
Built-in BetaFlight OSD to adjust PID
BEC Output: 5V 3A
Size: 30.5 x 30.5mm board, 3mm mounting holes ( M3 )
Weight:7g
Support SUBS / PPM / DSMX receiver
ESC
50A 2-6S Blheli_32 RGB light ESC:
Input Voltage: 2-6S Lipo battery
Constant Current: 50A
Peak Current: 60A
BEC Output: no
CPU: STM32F051 BLHeli - 32 firmware
Size: 26 x 15 x 6MM
Weight: 7.4g
MOS Tube: TOP QUALITY MOSFET
Features
- Support Dshot 1200 in default out from factory
- Also support Oneshot42, Oneshot125, Multishot, Dshot150, Dshot300 and Dshot600
- Ultra light and ultra small ESC
- The color of RGB LED can be set by Blhelisuite.
-Powered by high performance STM32 MCU frequency up t0 48 MHZ
-Composed of 3Oz gold plated PCB
-Flashed with the latest BLheli32 firmware
-Supports higher KV motor and more power load, more suitable for violent flight of racing drone
-Aluminum heat sink effectively slow down the temperature rise
VTX
FPV Transmitter
Output power: 25mW / 200mW / 500mW / 800mW switchable
Control mode: button OR Channel changes and Pit mode setting through PWM
With a microphone, you can switch the audio flexibly
BAT: 7 - 26V, BEC 5V - 1A
310mA - 800mW
Video system: NTSC / PAL
Motor
Skystars 2306 KV1800, race edition
Camera
Model RunCam Swift 2
Image Sensor 1/3" SONY Super HAD II CCD
Horizontal Resolution 600TVL,4:3
Lens 2.3mm 150-degree
Signal system PAL
Integrated OSD: yes
Integrated MIC: yes
S/N Ratio: more than 60dB ( AGC OFF )
Electronic Shutter Speed PAL: 1/50 - 100,000; NTSC:1/60 - 100,000
AutoGain Control ( AGC ): yes
Back light compensation ( BLC ): yes
Min.illumination 0.01Lux/1.2F
WDR D-WDR
DNR 2DNR
Day/Night Color / Auto / B and W
Power DC 5 to 36V
Net weight 14g
Dimensions 28.5mm x 26mm x 26mm
DP7056C 7 inch Propeller
RC Drone Finger Tracker
Flashing LED light, buzzer
Battery tie: 20MM, anti-slip pad
Powered by 3.7 100mAh LiPo battery ( included )
Pagoda 2 Antenna
Gain: 1.6dBi
Axial ratio: 1.0 ( near perfect )
Bandwidth: 5.5GHz - 6.0GHz
Radiation Efficiency: 95 percent
VSWR: less than or equal to 1.22
Connector: MMCX
Works great as both a transmitting or receiving antenna
Compatible with other styles of 5.8GHz RHCP antennas
10.9,12.9 screws
Aluminum column 30MM
Note: the color ( black, orange ) of the camera is random.
Frame Kit
Wheelbase: 300mm
Arm Plate Thickness: 4mm
TOP and Bottom Plate Thickness: 2mm
Side Plate Thickness: 2mm
Material: 3k Carbon Fiber
Flight Controller
Micro F4 Flight Control Board ( D-Shot Version )
MPU: 6000
CPU: STM32F405RGT6
Input Voltage: 2 - 6S LiPo
Built-in BetaFlight OSD to adjust PID
BEC Output: 5V 3A
Size: 30.5 x 30.5mm board, 3mm mounting holes ( M3 )
Weight:7g
Support SUBS / PPM / DSMX receiver
ESC
50A 2-6S Blheli_32 RGB light ESC:
Input Voltage: 2-6S Lipo battery
Constant Current: 50A
Peak Current: 60A
BEC Output: no
CPU: STM32F051 BLHeli - 32 firmware
Size: 26 x 15 x 6MM
Weight: 7.4g
MOS Tube: TOP QUALITY MOSFET
Features
- Support Dshot 1200 in default out from factory
- Also support Oneshot42, Oneshot125, Multishot, Dshot150, Dshot300 and Dshot600
- Ultra light and ultra small ESC
- The color of RGB LED can be set by Blhelisuite.
-Powered by high performance STM32 MCU frequency up t0 48 MHZ
-Composed of 3Oz gold plated PCB
-Flashed with the latest BLheli32 firmware
-Supports higher KV motor and more power load, more suitable for violent flight of racing drone
-Aluminum heat sink effectively slow down the temperature rise
VTX
FPV Transmitter
Output power: 25mW / 200mW / 500mW / 800mW switchable
Control mode: button OR Channel changes and Pit mode setting through PWM
With a microphone, you can switch the audio flexibly
BAT: 7 - 26V, BEC 5V - 1A
310mA - 800mW
Video system: NTSC / PAL
Motor
Skystars 2306 KV1800, race edition
Camera
Model RunCam Swift 2
Image Sensor 1/3" SONY Super HAD II CCD
Horizontal Resolution 600TVL,4:3
Lens 2.3mm 150-degree
Signal system PAL
Integrated OSD: yes
Integrated MIC: yes
S/N Ratio: more than 60dB ( AGC OFF )
Electronic Shutter Speed PAL: 1/50 - 100,000; NTSC:1/60 - 100,000
AutoGain Control ( AGC ): yes
Back light compensation ( BLC ): yes
Min.illumination 0.01Lux/1.2F
WDR D-WDR
DNR 2DNR
Day/Night Color / Auto / B and W
Power DC 5 to 36V
Net weight 14g
Dimensions 28.5mm x 26mm x 26mm
DP7056C 7 inch Propeller
RC Drone Finger Tracker
Flashing LED light, buzzer
Battery tie: 20MM, anti-slip pad
Powered by 3.7 100mAh LiPo battery ( included )
Pagoda 2 Antenna
Gain: 1.6dBi
Axial ratio: 1.0 ( near perfect )
Bandwidth: 5.5GHz - 6.0GHz
Radiation Efficiency: 95 percent
VSWR: less than or equal to 1.22
Connector: MMCX
Works great as both a transmitting or receiving antenna
Compatible with other styles of 5.8GHz RHCP antennas
10.9,12.9 screws
Aluminum column 30MM
Note: the color ( black, orange ) of the camera is random.
Specification
Dimensions and Weight | Product weight: 0.3900 kg Product size: 19.00 x 19.50 x 4.50 cm / 7.48 x 7.68 x 1.77 inches Package weight: 0.7160 kg Package size: 36.00 x 26.00 x 6.00 cm / 14.17 x 10.24 x 2.36 inches |
|---|---|
Package Contents | Package Contents: 1 x RC Drone, 3 x Strap, 1 x Anti-slip Pad, 4 x Motor Nut, 8 x Propeller |
Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
Color and Style Disclaimer:
The item color and style(or pattern) is subject to stock availability, we reserve the right to substitute for another color/pattern.
The item color and style(or pattern) is subject to stock availability, we reserve the right to substitute for another color/pattern.
Small Parts Disclaimer:
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.
View More
Recommended Products
Sponsored Products
loading...
loading...
loading...
loading...
4.9 *****
- 9
- 1
- 0
- 0
- 0
- All ( 10 )
- ( 4 )
- ( 1 )
Md.Alan Habri
Jan 24,2019
- Components i skip to install-lost alarm buzzer/side acrylic plate/led, will fly for about 10 packs then i'll decide to put the rest of the components. Flies good out of the box-just put in my rate. came with BF3.5.2 Same FC with the Skystars Stx225 ( follow build guide from Andy RC's you tube channel) easy connection, im on crossfire nano hook it up at tx3/rx3. smart audio on tx6, bolt that goes into the standoff i changed to abit longer for extra grip. overall frame quite stiff, dont know if it hold up on crashes ( well, i never plan to crash anyway). Im happy for quality considering the cheaper price. cruising with runcam 3s about 5mins steady flight (not aggresive on 4S lipo only). i switch to other hole for camera mounting screw because i dont want the lens to protrude out yet to change to GoPro lens (longer). i use my own rubber standoffs for vibration dampening.
mianos
Jan 11,2019
- The receiver ports are illustrated in the photo. SBUS goes to the sbus pin and works out of the box.If you have a Flysky ibus receiver with the normal non inverted output you need to connect it to rx1 or swap the solder ball.All the motors come up and the VTX is good but gets quite hot.You should move the pagoda to the top of platform instead of hanging out the bottom.The buzzer is good but resetting it with the button every time is a pain.Maybe someone knows if there is a way to reset it with dis-arm?
Papadoc FPV
Dec 10,2018
- This 7 inch copter fly's good the way it comes, there are a few things I will change, part the FC isn't soft mounted(it has no oscillations yet), the fpv antenna and needs better placement, rather just a bit longer to get above the battery, and last if you use turtle mode you need to protect you esc's, it has a lot of torque,and will hit them.
Zx6r
Mar 05,2019
- This is a great quad! Truly a great flyer on stock settings with an awesome video camera! Just add you receiver and fly.
Satisfied customer
Dec 25,2018
- The props are quieter than you would guess. I fly it in a park and people don't mind.Everything is as expected, although you will need to figure out how to attach the receiver yourself and change the VTx power settings. There are some videos online.
José Antonio
Mar 05,2019
- Un drone idéal pour débuter dans le long range à moindres frais et avec un rapport qualité prix exceptionnel !!! Je lui ai rajouté un récepteur R9mm de chez FRSKY, combiné à un module R9 sur ma Taranis QX7 et tout fonctionne parfaitement . La caméra Runcam Swift 2 est de très bonne qualité et le 4 en 1 de 50A encaisse sans soucis les batteries 6S ;) Un SUPERBE achat !!!
GREAT FLYER
Dec 24,2018
- A big good quad to play around whit, flyes well and take 6s without a problem-use 5s my self and use it as a cruiser, it has a great camera and easily takes an 1800 hundred lipo for a bit longer fly time. love this maskin.
PhatPastor
Jan 22,2019
- This quad is simply unbeatable at this price. 7” of smooth long distance flying. I added crossfire and GPS! Simple said one of my favorite quads hands down! Go ahead buy this you’ll love it
PREDATOR
Mar 27,2019
- this 7 "qwad is awesome amazing will do all stunts a 5"and just so smooth in doing so and long range is outstanding!!!
SkyKing
Feb 10,2019
- This quad can’t be beat, exceptional quality and value, exhilarating to fly, easy to set up.
No more comments