HAPPYMODEL Mobula7 75mm 2S Indoor Brushless Whoop RC Drone - BLACK BASIC BNF FLYSKY

Since the aircraft is powered by two 1S batteries in series, and the aircraft supports 1-2S power supply, please be sure to drop when the single cell voltage is lower than 2.9v or the buzzer starts to alarm, so as to avoid over-discharge.

Main Features:
- Crazybee F3 PRO version of the flight controller support 1-2S lithium battery
- 2S indoor Whoop RC drone with stronger power and longer flight time
- Support BetaFlight tuning, multiple flight modes
- Integrated injection molding Tiny Whoop structure
- Frsky and Flysky versions of highly integrated motherboard integrated OSD, Dshot ESC, 2.4G SPI receiver, galvanometer
- DSM2/DSMX version flight control integrated OSD, Dshot four-in-one ESC, 2.4G serial receiver, galvanometer
- Frsky EU-LBT version external Frsky XM+ receiver Supports EU-LBT version remote control
- Integrate Betaflight OSD function, keep abreast of flight voltage, receiver signal, fly more calmly
- VTX comes with Smartaudio function, which can adjust the flight control parameters through the OSD to adjust the flight control PID and adjust the VTX frequency parameters.
- Completely assembled and commissioned, the hands and the remote control are flying
- Receiver optional Frsky NON-EU version (D8/D16 switchable SPI receiver), Flysky version (AFHDS/AFHDS-2A switchable), DSM2/DSMX version, Frsky EU-LBT version (external XM+ receiver)
- Camera tilt angle is adjustable
- Integrated buzzer

The basic version's configuration includes:
WHOOP 75mm frame x 1
Crazybee F3 PRO flight controller integrated ESC OSD receiver galvanometer x 1
SE0802 KV16000 Brushless motor x 4
40mm CW/CCW positive and negative paddle x 8
5.8G 40CH 25mW image transmission + 700TVL 1/4 CMOS camera x 1
3.8V 250mah ( PH2.0 ) 30/60C li-ion battery x 4
Battery holder x 1
USB charger x 1
Stripper x 1
Screwdriver x 1

Standard edition's configuration includes:
WHOOP 75mm frame x 1
Crazybee F3 PRO flight controller integrated ESC OSD receiver galvanometer x 1
SE0802 KV16000 Brushless motor x 4
40mm CW/CCW positive and negative paddle x 8
5.8G 40CH 25mW image transmission + 700TVL 1/4 CMOS camera x 1
3.8V 250mah ( PH2.0 ) 30/60C li-ion battery x 4
6-way charger x 1
Stripper x 1
Screwdriver x 1
1 x Battery Holder

Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

Small Parts Disclaimer:
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.