Open our Cool Free APP!

Enjoy APP-Exclusive Deals.

Open APP
Tero Q215mm FPV Racing RC Drone Kit
Tero Q215mm FPV Racing RC Drone Kit
Tero Q215mm FPV Racing RC Drone Kit
Tero Q215mm FPV Racing RC Drone Kit
Tero Q215mm FPV Racing RC Drone Kit
1/1

Tero Q215mm FPV Racing RC Drone Kit - BLACK PNP ( NO RECEIVER )

$104.99
133.81
18 reviews

Coupon:

promotion:

Support COD payment

Warehouse & Fee

Select
CN-099:Ship between: Feb 11 - Feb 13

Product Options

Select
BLACK PNP ( NO RECEIVER )
Visit Store

Reviews (18)

Stuffy
17/10/2018 16:44:32
Originally ordered the TeroQ215 but when I found out it was going to take an extra two weeks to ship because of demand, I changed my order to the STX225 fpv drone. As it turns out, this drone was shipped about the same time which means I could have waited. I haven't completely finished the build on the STX as it is a bit more complicated than the Tero. I am hoping the STX can still do a PPM receiver. There is no manual as to how to wire the flight controller. However, customer support on the switch was great
View More

Description

Specifications
215mm Carbon Fiber Frame Kit
Wheelbase: 215mm
Arm Plate Thickness: 5mm
Bottom Plate Thickness: 5mm
Side Plate Thickness: 3mm
Material: carbon fiber

Rcharlance F4 PRO+ V2 Flight Controller
Processor: F4 ( STM32F405 )
Gyroscope: MPU6000 ( Reserved external gyroscope interface )
Firmware: BetaFlight OMNIBUS F4SD
Input Voltage: 2 - 6S LiPo support
BEC Output: 5V 3A
Firmware: BetaFlihgt 3.2.0 OMNIBUSF4SD
Net Weight: 12g ( not including cable )
Size: 36 x 36mm
Mounting Hole: 30.5 x 30.5mm

Receiver
Support PPM, SBUS, IBUS, DSM2 / DSMX Receiver ( UART1 )
Integrated with OSD, support BF Ground Station adjust OSD
Adjust the PID by OSD via remote control
DShot support
Support Smart Audio, adjust the VTX by OSD ( UART3 )
MicroSD card black box
Baro ( BMP280 )

VTX
Frequency: 5362 - 5945MHZ
Video Format: NTSC / PAL
Transmitting Power: 25 / 200 / 600 / 800mW switchable
Operating Voltage: DC 7V - 24V
Output Voltage: 5V 450mA
Working Current: 25mW: 240mA / 200mW: 340mA / 600mW: 520mA / 800mW: 600mA
Remote Software Protocol: Smart Audio V2.0
Audio Bandwidth: 6.5MHz
Video Bandwidth: 18MHz
Channel: 40CH
Range: up to 4km omnidirectional RHCP antennas
Connector: MMCX 
Supports smart audio ( remote parameter adjustment )

30A 2-6S BLHeli - S 4 in 1 ESC
Input Voltage: 2 - 6S LiPo battery
Constant Current: 30A
Peak Current: 40A
BEC Output: no
Mounting Hole Spacing: 30.5mm
30A Continuous Current: 50A burst
8-bit compatible ESC ( BLHeli - S )
Incredibly small size
Very low weight
Auto timing feature
Build in a current sensor
Smooth response
Compatible with BetaFlight F3 / F4 flight controller
Support Damped Mode, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, forward and reverse.

FPV Camera
CCD: 1/3 inch super HAD II CMOS
Horizontal Resolution: 700TVL
TV System: PAL / NTSC
5D OSD Button: yes
Input Voltage: DC12V
Dimensions ( mm ): 25 x 25 ( W x L )
Menu ( OSD ): English menu
White Dot Repair: support
Image Adjustment: support
Weight: 14.6g ( with bracket )

2206 2600KV Motor
KV: 2600KV
Battery ( LiPo ): 2 - 4S
Spindle Diameter: 22mm
Spindle Length: 6mm
Out Shaft Diameter: 5mm
Motor Size: 33.5 x 39.1mm
Thrust: 1600g ( 16V 5048 3-blade propeller )

Frsky XM+ Receiver ( BNF version only )
Dimension: 21.5 x 12 x 3.5mm ( L x W x H )
Weight: 1.6g
Number of channels: up to 16CH from SBUS ( 1 -15CH for PWM, 16CH RSSI for FC )
Operating Voltage Range: 3.7 - 10V
Operating Current: 30mA 5V
Operating Range: full range
With RSSI Output on Board: analog 0 - 3.3V
Firmware upgradeable
Compatibility: FrSky D16 mode

Note: the colors of the propellers are sent randomly.

Specification

General

Type: Frame Kit

Dimension and Weight

Product weight: 0.2370 kg
Package weight: 0.4600 kg
Product size (L x W x H): 21.50 x 21.50 x 8.00 cm / 8.46 x 8.46 x 3.15 inches
Package size (L x W x H): 16.00 x 16.00 x 5.00 cm / 6.3 x 6.3 x 1.97 inches

Package Contents

Package Contents: 1 x 215mm Carbon Fiber Frame Kit, 1 x F4 Pro+ Flight Controller, 1 x 30A BLHeli - S 4-in-1 ESC, 1 x 700TVL CMOS Camera, 4 x 2206 2600KV Brushless Motor, 4 x CW Propeller, 4 x CCW Propeller, 1 x Antenna, 1 x Battery Plate, 1 x Battery Strap
Tero Q215mm DIY Version FPV Racing RC Drone Kit F4 PRO+ V2 FC 30A 2 - 6S 4 in 1 ESC- Black PNP ( No Receiver )
Tero Q215mm DIY Version FPV Racing RC Drone Kit F4 PRO+ V2 FC 30A 2 - 6S 4 in 1 ESC- Black PNP ( No Receiver )
Tero Q215mm DIY Version FPV Racing RC Drone Kit F4 PRO+ V2 FC 30A 2 - 6S 4 in 1 ESC- Black PNP ( No Receiver )
Tero Q215mm DIY Version FPV Racing RC Drone Kit F4 PRO+ V2 FC 30A 2 - 6S 4 in 1 ESC- Black PNP ( No Receiver )

Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

Small Parts Disclaimer:
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.

RECOMMENDED PRODUCTS

SPONSORED PRODUCTS

New Member's Bonus: $50 Coupon
$104.99

Tero Q215mm FPV Racing RC Drone Kit

Color

Size

Quantity - +
installments: choose
loading...
loading...
cancel
loading...
loading...
loading...

Reviews

4.06 *****
  • 12
  • 2
  • 0
  • 1
  • 3
  • All ( 18 )
  • ( 9 )
  • ( 3 )
Stuffy
17/10/2018 16:44:32
Originally ordered the TeroQ215 but when I found out it was going to take an extra two weeks to ship because of demand, I changed my order to the STX225 fpv drone. As it turns out, this drone was shipped about the same time which means I could have waited. I haven't completely finished the build on the STX as it is a bit more complicated than the Tero. I am hoping the STX can still do a PPM receiver. There is no manual as to how to wire the flight controller. However, customer support on the switch was great
Stahi
11/11/2018 14:23:08
From the high quality carbon to the recessed screws - a very nice frame. Nice looking props, Flight controller stack and motors. Skip the braided wire covers and reverse camera feed others have noted. I love the awesome multicolor leds. They change based on your stick input. I’m looking for another kit this good. I should have ordered 2 or 3 and given them as Christmas gifts or to have saved someone the 14 plus days it took to arrive.
Marcelo
22/10/2018 14:42:09
Problems found during mouting:1 - The wires (video signal and 5v) from video cam to vtx was INVERTED;2 - to use DSMX receiver we have to unplugged the signal wire from the plug and then soldering direct to the rx1 pin;3 - the gnd wire from ESC to FC board burn out... we rebuild the wire... look for the reason may cause the wire burned and didn’t found nothing wrong, with the new wire rebuild... we plug the battery and every thing works fine!Tero Q215 is flying OK with no more issues.
Juergen
04/11/2018 09:36:42
Got it yesterday at lunchtime, build it in the afternoon. Flashed Betaflight 3.5.3#60, adjusted it in the morning and did a maiden flight. Everything works perfectly and it flies like a dream. Did the following changes:- motors are softmounted - FC mounted with flight controller Anti-Vibration fixed screws from Realacc- changed camera for a better quality oneOnly deficiency:- VTX all the time changes channel to default channel when plugging in a battery
RoB
31/10/2018 20:54:20
1. The FrSky XM+ RX is missing from the package!2. One of the screw holes is not drilled out to countersunk in the bottom of the frame - see the attached picture!3. One small electornic part was fallen down from the FC just out of the bag - pic atttached! I am a little disappointed! :(
schear
28/10/2018 14:38:31
after a lengthy shipping process, it took 30 minutes to build. I took my time. Fly's great ,osd is awesome. I put a bigger capacitor on it and a different cloverleaf antenna. it comes with a Pagoda witch is great but I don't have one on my goggles so it was fuzzy. I will use it if I get one for my goggles.
Chris
07/11/2018 18:52:44
Went together easily following other YouTuber videos. Setup everything up in betaflight up until it was time to connect battery and test motors and then no power coming from esc...bit annoying.
Arnoldo
07/11/2018 09:31:07
Tero Q215mm FPV RC Racing Drone Kit - BLACK PNPF4 PRO + V2 FC 30A 2 - 6S 4 in 1 ESCA good FPV Racer kit with F4 flight controller, DSHOT600 30A ESC's 4in1 blockVideo transmitter with 25-800mW and MMCX plugFPV camera is CMOS but with a new super HAD II chip PAL / NTSCReinforced 2206 2600KV motors which can be loaded up to 4S.
fritzo
07/11/2018 15:45:25
This is a huge upgrade compared to the quads I built 3-5 years ago!much more fun to fly - I would rate this kit as very good quality, but of course you always have to stay on your toes to build very carefully and thoughtfully.
Luca
12/12/2018 00:16:22
Unbeatable quality-price ratio, easy to assemble, fly very well, engines behave very well, I recommend it for those who approach the race
View More
View More
View More