Main Features: Be sent in DIY assembly parts. Recommended battery and receiver need to be extra purchased. Phoenix 210 is creatively designed by combining the advantages of pure carbon fiber main board and molded ABS arms. It makes the Phoenix 210 nice appearance, more strength, lighter, easier assembly and higher precision. The small board can be connected up to 6 electronic speed controllers. The board with two DC outputs: 5V / 1A for flight controller and another one labeled with 12V / 1A or BATT for PHOENIX equipment. One-shot 125 is supported, the ESC equipped with external oscillator and flashed with the popular BLHeli program for quick response, smooth throttle and low running temperature.
Warm Prompt: The color of the propellers will be sent at random （green, orange, red, blue or white）. Specifications: Brand: REDCON Item No.: Phoenix 210 Color: Pink, Red, Yellow Copter Size: 200 x 170 x 65mm Diagonal Size: 260mm Weight: About 480g Material: Carbon Fiber Camera Pixel: 976 x 582 CC3D Flight Controller Input Voltage: 4.8 - 6.0V ESC: REDCON 15A Input: 3 - 4S Lipo ( Not Included ) Output: 5V / 1A and 12V / 1A
Package Content: 1 x Phoenix 210 Frame 4 x 2204 / 2300KV Motor 1 x CC3D Flight Controller 1 x Power Distributor 4 x 5045 Propeller 1 x Camera 1 x 200mW 5.8G FPV Transmitter 4 x REDCON 15A ESC
Remote Control: Radio Control
Channel: No Transmitter
Mode: No Transmitter
Detailed Control Distance: Unknown
Transmitter Power: No transmitter included
Model Power: 1 x Lithium battery(not included)
Dimension and Weight
Product weight: 0.405 kg
Package weight: 0.800 kg
Product size (L x W x H): 17.00 x 20.00 x 6.00 cm / 6.69 x 7.87 x 2.36 inches
Package size (L x W x H): 24.00 x 19.30 x 6.50 cm / 9.45 x 7.6 x 2.56 inches
Package Contents: 1 x Phoenix 210 Frame, 4 x 2204 / 2300KV Motor, 1 x CC3D Flight Controller, 1 x Power Distributor, 4 x 5045 Propeller, 1 x Camera, 1 x 200mW 5.8G FPV Transmitter, 4 x REDCON 15A ESC
Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
We do not accept any responsibility or liability for the incorrect purchase of our products. All of the products on the website are extensively tested to comply with rigorous and strict QC standards. For all of our clothing products, items and accessories, please take careful note of the precise measurements, mainly shown in centimeters (CM). As part of our company policy, we will not be able to accept returns or provide refunds for items which are the wrong size.
Product photography is for illustration only. The product sold may have minor physical differences depending on manufacturer specifications, production batch, etc. Customers should carefully consider this before purchase.
Please ensure the RC device is correctly calibrated before first time use. Any damage caused by misuse and/or general wear and tear is not covered by the warranty.