Excelvan 4K 1x2 HDMI 1.4 Splitter - Black EU Plug
Coupon:
Promotion:
Support COD payment Warehouse & Fee
SelectProduct Options
SelectDescription
Excelvan 4K 1x2 HDMI 1.4 Splitter
Introduction:
4K HDMI splitter 1X2 distributes 1 HDMI source to 2 HDMI displays simultaneously and 3D Compatible. It offers HD solutions
for HDTV retail and show site, HDTV, STB, DVD and Projector factory, noise, space and security concerns, data center control,
information distribution, conference room presentation, school and corporate training environments.
It can optimize your home theatre system to the best effect.
Features:
-Distribute an active input signal of the ONE input to the TWO outputs.
-Support HDCP protocol and applicable to source device and high definition display device such as DVD and HDTV which have
HDMI ports or digital ports, and are compliant with HDCP protocol.
-Support high resolutions up to 4Kx2K@24/30, including 480i/480p, 720i/720p, 1080i/1080p @50/60, etc.
-Support HDMI 1.4 and 3D.
-Extend the transmission distance and improve transmission signal.
-Plug-and-play, no settings required.
-Save space, easily installed.
-LED indicates signal and power mode.
-Power supply (Please refer to Specification)
Application:
It receives HDMI signals from DVD, TV BOX, PS3, PS4, Satellite Receiver, WII U, Set-top Box, HD DV Camera and other HDMI enabled devices in order to deliver
those signals to high definition display device such as HDTV, HD Projector and HDMI Flat Panel Display.
Connection:
1. Connect the input source and output displays to the HDMI Splitter . *Please refer to the Connection Image.
2. Connect the DC 5V power supply to the splitter. Please kindly note that power supply with higher voltage may damage the splitter.
3. When input source and output displays are connected and turned on, the corresponding LED will light.
PS: In order to protect the splitter and your devices, p lease make sure the splitter is powered off before you attach in or extract
video source and displays. Please insert and extract HDMI cables gently.
Interface:
Specification:
Brand | Excelvan |
Model | VK-102A |
HDMI Source Input Port | 1 |
Display Device Output Port | 2 |
Input Video Signal | 0.5 -1.0 volts p-p |
Input DDC Signal | 5 volts p-p (TTL) |
Max Single Link Range | 4K x 2K@30Hz |
Output Video | HDMI 1.4a HDCP1.0/1.1/1.2/1.3 |
Resolutions DTV/HDTV | 576i/576p/720p/1080i/1080P/4K |
Frequency Bandwidth | 2.97Gbps |
EIDI Duration | 4 seconds |
Support deep color | 30bit, 36bit, 48bit per pixel |
Digital audio format | DTS-HD/Dolby-true-HD/LPCM 7.1/DTS/Dolby-AC3/DSD |
Source Port Connector | 19 PIN HDMI(A TYPE) |
Display Device Port Connector | 19 PIN HDMI(A TYPE) |
HDCP Compliant | YES |
Source Device Selection | By pass |
Input Video Signal | 0.5-1.0 Volts P-P |
Input DDC signal | 5 Volts P-P(TTL) |
Single Link Range | 4K*2K 30HZ |
HDMI Version | HDMI 1.4 |
Bandwidth | Up to 340Mhz |
Signal Speed | Up to 10.2Gbps |
The length of input cable | PS3≤10M；BLUE DVD≤10M |
The length of output cable | ≤10M |
The cable standard | 28AWG HDMI1.4 |
Vertical Frequency Range | 60Hz |
Power Consumption(max) | 1.5 Watts |
Operation Temperature | 0℃ to 40℃ |
Working Voltage | DC 5V |
Power Adaptor | 5V 1A |
Net Weight | 128g |
| Dimension: L×W×H（mm） | 70×60×20 |
| Packaging accessories | 1* HDMI Splitter |
1* Power Adaptor | |
1* English User Manual |
Note:
Before using HDMI Splitter, please make sure the source device and display device are well connected with cables. In order to make the
relevant ports work properly, firstly connect the power supply to splitter, then connect the power supply to source device and display device.
The splitter doesn't appear to be functioning.
Firstly, check if the LED lights, if the power supply is in good condition and well connected.
Secondly, make sure all cables are in good condition and well connected.
Thirdly, make sure the length of the cables is within the maximum supported length of this splitter.
Lastly, please try to connect the input source to the display directly to see if it display normally.
If the maximum resolution the two displays supported is not the same, what resolution be displayed
The splitter will display at the lower one to both displays.
