Launch our Cool Free App!
Get $3 Off 1st Order.
Dimension: 31(L) x 31(W) x 57(H)mm
Band: 2G GSM: 850/900/1800/1900Mhz
GPS Sensitivity: -159dBm
GPS Accuracy: 5m
LBS Accuracy: 100-2000m
GPS Start time:Cold status 45s, Warm status 35s, Hot status 1s
Working Voltage: 10-40V DC
Backup Battery: Chargeable 3.7V 80mAh Polymer Li-ion Battery
Storage Temperature: -40°C to +85°C
Operation Temperature: -20°C to +65°C
Humidity: 5%--95% non-condensing
Special Functions: illegal cut line alarm, Remote Cut Off Fuel, Vibrate Alarm
1. Hidden Design and Easy Installation: relay outlook design makes the device very convenient to hide and install.
2. Wide Operating Voltage 10-40V DC, compatible with vehicles on the market.
3. Remotely Cut Off & Resume Fuel: Once your vehicle was stolen or meet any emergency, you will can remotely cut off the fuel via SMS command or APP to stop the vehicle, of course you also can resume the fuel remotely.
4. GPS+LBS Double Positioning: If the gps signal is good, the device will locate via gps satellite, if not, the device will locate via LBS! Under GPS locating mode, the accuracy is 5-10 meters, under LBS locating mode, the accuracy is 100-1000 meters!
5. Realtime Tracking: You will can realtime track the device on google maps via mobilephone, tablet and computer, and the minumum data upload interval is 10 seconds!
6. History Route Playback: The APP and web server can record the upload data of the device up to 6 months, you will can playback the history route at any time!
7. Power Saving Mode: The device will go into standby mode automatically when there isn't vibration for 3 minutes , it will go into working mode when it detect vibration again
8. Overspeed Alarm: This alarm works only under continuous positioning mode.When the unit speed is exceed the speed you presetted, it will send message "speed alarm!" to the admin number every 5 minutes.
9. Shake Alarm: After you did the shake alarm setting,please keep the tracker being stationary for 5 minutes, then this function will start working. It will send SMS "sensor alarm!" to the admin number when the unit get shocked.
10. Movement Alarm: When the units stays immobile in a place for 10 minutes, the user can set up the movement alarm by this command "move+passord", then in case the device moved 500m it will send alarm SMS "Move Alarm+Latitude and longitude" to the authorized number.
11. Geo-fence: Set up a virtual fence for the tracker to restrict its movements within a district. The unit will send alarm information to APP and web server when it goes out of or get in this district.
12. Sleep Mode:
* Sleep by time mode: After did this setting, tracker will only work for 5 minutes after being waked up, and back to sleep mode, GPS will shut off and GSM will works in low consumption mode. SMS, call will can wake up the tracker.
* Sleep by shock sensor mode: After did this setting, if no shock for 5 minutes, the tracker will work under "sleep by shock" mode, GPS will shut off, GSM will works in low consumption. Vibration, SMS, call will can wake up the tracker.
13. Cutting Line Alarm: Under arm mode, if someone cut the wires of the device, you will can get alarm information from the device
1 * Relay GPS Tracker Main Unit LK720
1 * User Manual