The era of large screens has extended from mobile phones to TVs, and the larger the TV screen, the more expensive it is, and hundreds of inch TVs are expensive; therefore, many people’s eyes are also on the projector, but the projector is affected by light. , The picture is not as clear as a television, and the color is not enough; until the advent of the laser light source, the brightness of the projector was more breakthrough, and the clarity and color had better performance. A few years ago, Mijia released several laser projectors. This year, Mijia laser projectors were officially launched. Today, we just got Xiaomi Mijia Laser Projector ALPD3.0. Let’s take a look.
Mijia laser projectors are mainly porcelain white, which also extends the porcelain white of Xiaomi mobile phones to the design of the projector. The case is made of high-gloss PC material, and the corners are rounded Body, but it is really not resistant to dirt, porcelain white has strong adsorption, and it is easy to stick stains. The front of the fuselage is different. The front is a gray fabric design. The projection lens, focusing lens and anti-view sensor are all on the front.On the right is the position of the projection lens and anti-view sensor;On the left is the focusing lens.The sides are usually covered with openings, and the right side is the air inlet and the left is the air outlet. The air outlet can obviously feel the wind, but the noise of the Mijia laser projector is really low.
On the back are various interfaces. Apart from the unexpected interface, there are no other redundant designs. One Gigabit Ethernet port, one S / PDIF interface, one audio output interface, two USB2.0 interfaces and two HDMI interfaces.
The bottom surface has four non-slip pads and four spiral holes.
2019 Mijia laser projector ALPD3.0 uses the same MIUI TV system as Xiaomi TV, waterfall design, columns and content are distributed up and down, including Xiaomi video massive film and television resources, and at the same time according to the recommendations of Patchwall intelligent system is more in line with users The content of viewing habits.
In addition, Mijia’s laser projector ALPD3.0 has built-in Xiaoai classmates, which can be awakened directly by voice, and can control video playback, download software, and open software by voice commands.
Mijia laser projector also supports wireless connection, has Miracast protocol, can be screen-played with Android phones, Apple phones. Finally, the Mijia laser projector is equipped with an anti-viewing sensor. When the lens is blocked, the high brightness of the screen will be reduced instantly, and direct light will be avoided.
The laser light source used by Mijia laser projector ALPD3.0 has a brightness of 2400ANSI lumens. Whether it is turned on or projected in the daytime environment, the screen will maintain high brightness, which will escort the projected picture. The picture quality effect played in the dark night is very bright and colorful, and the colors are more natural and vivid.
During the day and when the light is turned on, the projection screen will be affected by external light. If there is not enough screen, a clearer picture will be maintained.
The overall experience feels that the 2019 Mijia laser projector ALPD3.0 has the biggest advantage compared to the Mijia projectors used before. The brightness of the 0.47DMD display chip is very ordinary, but the advantages of the laser light source. The gain in image quality is quite large, and there is no major change in operation. The built-in Xiaoai students will be much easier to use in voice control than most AI intelligent projections on the market. The laser projector with a price of $1999.99 can meet people’s needs for larger screens, higher brightness, and high picture quality.