Launch our Cool Free App!
Get $3 Off 1st Order.
Great Air Flow: The PWM function automatically adjusts fan speeds according to the CPU temperature for efficient cooling and minimized fan noise. It allows for dynamic speed adjustment between 800 rpm to 2, 500 rpm.
Supports Intel 115X CPU Socket: Comes up with an improved Intel CPU Block. This includes the comfortable Easy-Mount-System. After initial installation, the cooler can be mounted or dismounted tool-free at any time without the need to dismount the motherboard as well.
Addressable RGB LED Fan: Addressable RGB function with motherboard sync-control for vivid lighting effect.
Thermal Detection Sensor: CPU temperature monitored by a sensor and temperature change displayed through color lighting effects.
Super Quiet: Intelligent speed controlling function, keeps a perfect balance between airflow and noise.
1: Radiator dimensions: 100*100*72 MM（W/D/H）
2: Fan dimensions: 100*100*25 MM（W/D/H）
3: Fan rotation speed: 800-2500RPM ±10%
4: Fan connector: 4pin PWM
5: Noise: 29.6dBA(MAX)
6: Max air volume: 29.3CFM
7: Pressure: 3.61mmH2O(MAX)
8: Bearing: Hydraulic Bearing
9: Voltage: 12VDC
10: Life: 30000hours
11: Rated power: 4.2W
15: Compatibility: Intel LGA1151/1150/1155/1156/115
16: TDP 280W
17: Need to synchronize with the motherboard 3 pin 5V link.
1pcs CPU Air Cooler
4pcs Mounting Screws
Please connect the CPU Air Cooler with 12V 4 pin Connector on the motherboard. You may short circuit your motherboard if you connect to other ports.
For the MB without 5V ADD-HEARDE: Please plug the 4 Pin connector of the CPU air cooler into the 12V RGB-HEADER ONLY. It will has a fixed mode with RGB lighting effect.
For the MB with 5V ADD-HEARDE: Please plug the 4 Pin connector of the CPU air cooler into the 12V RGB-HEADER and plug the 3 Pin into the 5V ADD-HEADER. Which will allow you to change the color as you like via motherboard.
Also, They can synchronize with other ADD-RGB devices, Such as MR12 controller. Please plug the 4 Pin connector of the CPU air cooler into the 12V RGB-HEADER and plug the 3 Pin into the MR12 controller.