The low power electric doorbell transmits two-way video and audio to the user's cell phone through doorbell to connect the WiFi at home, just like making a video calling. Instead of the traditional cat eye, it is mainly composed of RTOS system, master control, camera and human sensor, WIFI and other devices. It integrates the functions of intelligence and security, and brings a new experience to you.
1.Two-way Audio -- With this smart doorbell, if you are not at home, you can respond to visitors who press the doorbell and can both communicate with visitors remotely. If the thief tries to confirm whether someone in the house or not through the doorbell, you can pretend to be at home through remote voice calls.
2. Automatic Capture Function -- Doorbell can automatically capture and start the video within 1 seconds when someone presses it. So you can check the record at any time and will not miss any visitors when you are not at home.
3. Remotely Auto-awakened -- You can view the outside security situation at any time and anywhere, especially during traveling. The APP can be one key to wake up doorbell in the standby state.
4. Motion Detection -- If you are away from home, the doorbell can be detecting door for 24 hours. The doorbell will send push messages and alarm to the your mobile phone when it ringing or someone around the door.
5. Solar Charging -- It supports solar energy permanent charge function, so it is not need to take out the machine to charge the battery. Besides, it can display the charging status.
6. Waterproof -- It is waterproof, anti-dust, so it can be installed both the outdoor and indoor.
7. Power-off Storage -- Powered by two 18650 batteries, it supports power outage video storage function.
8. Expandable Memory -- It supports TF free plug and play, more convenient for users to use and replace the new card with large capacity.
Product name: Smart Doorbell
Main control chip: GK7102X series
Sensor high-definition: HD CMOS sensor 1/4“OV9732
Camera: Full 3G1P ultra wide angle 1.7mm camera lens
Visual angle: Horizontal 166 degrees
Video stream output: 1280*720/15fps-25fps; 640*360/25fps; 1280*720/15fps-25fps
CMOS performance: Automatic white balance, automatic gain control, automatic backlight compensation.
System: low power, RTOS
Standby time: About 6 months (2 times daily waking up and detecting for a short time)
Day and night shift: Auto IR-CUT
Infrared distance: 850nm infrared, effective distance 3-5m
Network configuration: Two dimensional code scan (recommended) distribution network or AP distribution network.
Human sensor: Support PIR mobile detection (Defense)
Audio frequency: Audio coding standard AAC and G.726
Audio input/output: Microphone/Built-in one speaker
Video mode: Manual video, alarm video, AC power outage, video recording
Network: WiFi 2.4GHz
Network protocol: TCP/IP, HTTP, TCP, UDP, SMTP, DHCP, DNS, P2P
Wireless: WIFI802.11b/g/n wireless
Wake up: Wireless remote, supporting two-way remote wake-up
Human body infrared detection: Support
Automatic adaptation rate: Support
Two-way voice intercom: Support full duplex real time calls
Sleep time: Automatic
Voice call: Support
Remote wake-up: Support
PIR wake-up: Support
Mobile client: Over iOS 10.0 / Android5.0
Current source: Two 18650 battery (Not Included)
Working temperature: -10℃ ~ +50℃
Working humidity: ≤80%RH
1*Indoor Ding Dong Chime (Optional)