Micro Plug Home Office Mini Heater - Black

Material: PTC heating sheet + nylon + hardware + circuit board
HANDY HEATER European standard program description:
1. The power supply AC220 - 240V, 50Hz;
2. Power on, heating, fan rotation, the default work for 12 hours without pressing any button;
3. Press the time button to switch to the timing setting. "Old=Press "+-" button to set the timing time; new=press the time button to set the time" and press the time button to switch back to the temperature setting;
4. The initial display temperature is 20 degrees Celsius, the temperature setting press the up and down keys to set the temperature, the range is 15 - 32 degrees Celsius; the time setting is set to 1 - 12 hours;
5. Press the fan button to switch the high ( HH ) low ( LL ) two-speed fan speed;
6. Reach the set temperature, cut off the heating, the fan continues to work for 60 seconds and then stops, the screen shows OF, below the set temperature -1;
7. The arrival time (not set, the default is 12 hours), cut off the heating, the fan continues to work for 60 seconds and then stops, the screen displays OF;
8. After finishing the work, press any key to restart the work (the timer is not set, the default is 12 hours)
9. If there is " natural wind " function, press and hold " + - " button for three seconds to start, display CC; continue to hold down " + - " button for three seconds to close, display " natural wind " before starting.