Specification: 150 mm long head diameter 76 mm n tail diameter 65 mm, with torch buckle, more convenient to carry.
Lamp Head: XML-T6 Bead
Continuous luminescence time: 3-4 hours (depending on battery capacity, gear)
Weight: 465 grams
Color: Picture Color (Customizable)
Switch: Handle button switch
Origin: Shenzhen, China
Waterproof Level IP:67
Brightness XM-L T6 8000LM
Range: Medium-free space 300-500 metres
The diameter of the irradiated spot is 7-8CM at 1 m
Switching mode key switch
Functional uses: outdoor lighting, night riding, exploration, search, inspection, mountain climbing, suitable for family standing
Shell material: Aviation aluminium alloy T6063 shell, high hardness, anti-fall and anti-pressure, attack head design, very powerful, anti-skid pattern at the handshake, waterproof design, to ensure that it can be used in various adverse circumstances!
Circuit: Constant current drive with double protection against reverse connection and overtemperature, IC built-in overtemperature protection, circuit design reverse lithium battery protection, when reverse lithium battery, circuit board, lamp and lithium battery will not be damaged.
Batteries: Use 18650 special rechargeable lithium batteries
Dimming: Imported MCU IC3-5 grade dimming, low brightness-high brightness-flash (easy to apply)
Uses: Special work needs (such as patrol, search and arrest, on-site inspection, security, first aid at sea, etc.); outdoor activities (mountaineering, camping, survival, hiking, diving, fishing, hunting, etc.); professional needs (such as appreciation of jewelry, gambling stones); suitable for family standing.
2. Characteristics of flashlight
1. Set light and shine in one! Head attack head design, easy to deal with all kinds of sudden changes in the environment; 5 gear dimming, and can be controlled at will;
Fine pen fork, easy to carry, is a good helper for outdoor travel.
2. The surface of this flashlight is three-stage hard oxidation treatment, which is not easy to paint off, and it feels very good!
III. Instructions for Use
1. Check the batteries to ensure that the batteries are electrified and installed in the correct direction as torches;
2. Charging time is 2-3 hours (when charging is completed, there is an indication lamp). Don't overcharge and overdischarge. Don't reverse the positive and negative electrodes when charging.
3. When the flashlight is in use, according to the requirements of the flashlight on voltage and battery, it should not be used in disorder in order to prevent the burning of circuit boards. Batteries of different types and voltages should not be used at the same time.
4. In use, when the brightness of the flashlight changes significantly, the flashlight should be turned off to prevent excessive discharge of battery power and charging in time; pay attention to the water-proof, moisture-proof and fall-proof of of the battery. When charging, according to the charging speed of the charger, the indicator lamp should be removed in time after changing, and do not overshoot.
5. Batteries that are not used for a long time should be filled and maintained, and charged and discharged again in about three months to avoid chemical corrosion.
6. Keep the inner wall of the lamp cup clean. Never wipe it with hands or hard objects. Clear the fingerprints on the lens, and gently wipe it with a cotton swab dipped in the lens cleaner.
7. Do not contact the flashlight with sunlight, water, chemicals and corrosive gases for a long time to avoid damaging the flashlight.
8. Non-professionals should not disassemble flashlights to prevent damage to circuit boards.
1. Do not illuminate the eyes directly, so as not to cause damage to the eyes;
2. Do not use overvoltage, voltage should not exceed 4.2V, battery should not be inverted, otherwise circuit boards will burn.
3. This product is not a toy. Do not allow children to use it.
4. Receive the flashlight and recharge it for about 4 hours. Do not reverse the positive and negative poles when charging (if you find that the light is insufficient, it is usually about 1/3 of the highest brightness, please recharge immediately! )
5. Do not often disassemble the lamp head to avoid damage to the reflecting cup or bulb. The lamp head is an integrated circuit system, and the bulb is welded on the integrated circuit board. Non-professionals can't repair it. The focus of the flashlight has been corrected when it leaves the factory. So please don't unscrew it because it will affect the focus of the flashlight sometimes. If it is unscrewed, please adjust the nut of the lamp head to correct the focus. Please pay attention to it!
6. When charging, please identify the positive and negative electrodes of the charger, and do not overcharge the discharge battery, so as to avoid damaging the service life of the battery (charging time is usually 5-8 hours).
7. When using the torch, check that the screw tightening is not loosened, otherwise it may cause the light of the unlighted goods.
8. The flashlight should be avoided in the sunshine or high temperature environment. After stopping using, please take out the battery and store it in a cool and dry place after full charge.
9. The company flashlight has the ability of life waterproofing. Generally, the rain will not cause problems, but it does not have the function of diving. Do not take the flashlight to dive or put it in the tub or bathtub for a long time.
10. To keep O-rings (sealant rings) and threads running smoothly