$49.99
F7 AIO 3-6S Bluetooth Flight Controller OSD 32MB Black Box Current Sensor 4UART 35V 470uf Capacitor - Black
Coupon:
Promotion:
Support COD payment Warehouse & Fee
SelectCN-099:Ship between: Jun 08 - Jun 10
Product Options
SelectBlack
Reviews
Discussion
Be the FIRST to ask a question.
Ask a questionDescription
Main Features:
● The main control is upgraded to F722 chip
● 8 pin socket and pad supporting 4 in 1 ESC
● 32MB flash
● Better support for large current (especially some 6S batteries with high discharge coefficient)
● Add barometer
Specifications:
● MCU: STM32F722
● IMU: ICM20689
● Baro: BMP280 ( I2C )
● OSD: BetaFlight OSD with AT7456E chip
● BLE module: internally connected to UART3, can be set remotely through SpeedyBee App or other similar applications
● Black box: 32MB onboard data flash memory
● Current sensor: 200A ( 102 scale )
● BetaFlight Camera Control Board: Yes
● Power input: 3s-6s lithium battery
● Output power: 5V x 5 ( including BZ + ), the maximum load current is 2.5A. 9V x 1, the maximum load current is 2.5A.
● ESC power output: 4 x VCC output
● UART: UART pad x 4 ( UART1, UART2, UART4, UART5 )
● RSSI input: RSSI input pad
● SmartPort: Supports SmartPort using Softserial1
● Support flight controller firmware: Betaflightbeta, iNav ( coming soon )
● I2C: for external magnetometer, sonar, etc.
● Buzzer: BZ+ and BZ- pads for 5V buzzer
● ESC signal: S1 - S5
● LED pin: for WS2812 LED
● Boot button: used to easily enter DFU mode
● The main control is upgraded to F722 chip
● 8 pin socket and pad supporting 4 in 1 ESC
● 32MB flash
● Better support for large current (especially some 6S batteries with high discharge coefficient)
● Add barometer
Specifications:
● MCU: STM32F722
● IMU: ICM20689
● Baro: BMP280 ( I2C )
● OSD: BetaFlight OSD with AT7456E chip
● BLE module: internally connected to UART3, can be set remotely through SpeedyBee App or other similar applications
● Black box: 32MB onboard data flash memory
● Current sensor: 200A ( 102 scale )
● BetaFlight Camera Control Board: Yes
● Power input: 3s-6s lithium battery
● Output power: 5V x 5 ( including BZ + ), the maximum load current is 2.5A. 9V x 1, the maximum load current is 2.5A.
● ESC power output: 4 x VCC output
● UART: UART pad x 4 ( UART1, UART2, UART4, UART5 )
● RSSI input: RSSI input pad
● SmartPort: Supports SmartPort using Softserial1
● Support flight controller firmware: Betaflightbeta, iNav ( coming soon )
● I2C: for external magnetometer, sonar, etc.
● Buzzer: BZ+ and BZ- pads for 5V buzzer
● ESC signal: S1 - S5
● LED pin: for WS2812 LED
● Boot button: used to easily enter DFU mode
Specification
General | Model Number: F7 AIO Type: Flight Controller |
|---|---|
Dimensions and Weight | Product weight: 0.0088 kg Package weight: 0.0150 kg Product size (L x W x H): 3.86 x 4.40 x 0.70 cm / 1.52 x 1.73 x 0.28 inches Package size (L x W x H): 6.00 x 9.00 x 2.00 cm / 2.36 x 3.54 x 0.79 inches |
Package Contents | Package Contents: 1 x Flight Controller, 5 x M3 x 4.5 Anti-vibration Silicone Grommet, 5 x M3 x 8 Anti-vibration Silicone Grommet, 5 x M3 x 6 + 6 Nylon Column, 1 x JST 8PIN Cable, 2 x JST 8PIN Connector, 1 x XT60 Cable |
Recommended Products
Sponsored Products
loading...
loading...
loading...
loading...