Launch our Cool Free App!
Get $3 Off 1st Order.
Best 8W 3.7V Cordless Glue Gun Wireless USB Charging Mini Hot Melt Guns Rechargeable Lithium Battery Operated Cold Plastic Thermal Heat DIY Tool with Stand Using 7mm Glue Sticks
Use voltage: 3.7V
Gun material: aluminum alloy
Gun nozzle diameter: 1.8-2mm
Warm-up time: 5-7 minutes
Send out the amount of glue: 3-5g
Charging method: USB-lithium battery charging
Applicable glue stick: diameter 7mm
This product adopts high-tech ceramic PTC as heating element, which has fast heating speed and does not rise when the temperature reaches the design temperature. It can effectively prevent the heating body from overheating and damage the glue gun, save energy and reduce consumption, prolong life, voltage 3.7V, free from voltage. The fluctuation limit can be used normally.
Steps for usage:
1, usb-charge glue gun needs to use 5V2A charger. Please check whether the glue gun has electricity before use and whether the bracket is available.
2. Insert a strip of 7-7.3 mm in diameter from the end of the glue gun into the barrel;
3. Plug in the power supply for 5-7 minutes, until the strip is melted;
4. After the rubber strip is melted, gently pull the trigger to extrude the sol;
5, the sol can be used normally after extrusion;
6. After use, disconnect the power supply;
7. Support the glue gun bracket and place the glue gun on the horizontal table;
8. After the glue gun is cooled to room temperature, it can be collected;
1. The glue gun may emit a little smoke when it is used for the first time. This is normal. After 30 minutes of use, the smoke will be automatically eliminated.
After the completion of the work, if there is any remaining rubber strip in the barrel, it does not need to be taken out, and it can still be used normally when the electric heater is preheated to the working temperature.
2. In the process of using the glue gun, if you encounter glue that is sprayed from the nozzle itself, that is, leaking glue, please don't worry. This is because the glue gun is always energized.
When the temperature is kept constant, the strip will continue to melt. If it is not used in time, it will automatically flow out. If you don't want to glue, you need to advance
Break the power supply in 3-5 minutes.
Do not open the switch for long periods of time when not in use.
Do not use inferior glue sticks to prevent impurities from blocking the glue outlet
When the glue gun is working, the nozzle should not be lowered upwards to prevent the glue stick from melting, causing the glue to break and damage the glue gun.
1 x electric hot melt glue gun