Launch our Cool Free App!

Get $3 Off 1st Order.

Launch App
Alfawise U20 Large Scale 2.8 inch Touch Screen DIY FDM 3D Printer - US
Alfawise U20 Large Scale 2.8 inch Touch Screen DIY FDM 3D Printer - US
Alfawise U20 Large Scale 2.8 inch Touch Screen DIY FDM 3D Printer - US
Alfawise U20 Large Scale 2.8 inch Touch Screen DIY FDM 3D Printer - US
Alfawise U20 Large Scale 2.8 inch Touch Screen DIY FDM 3D Printer - US
Alfawise U20 Large Scale 2.8 inch Touch Screen DIY FDM 3D Printer - US
Alfawise U20 Large Scale 2.8 inch Touch Screen DIY FDM 3D Printer - US
Alfawise U20 Large Scale 2.8 inch Touch Screen DIY FDM 3D Printer - US
1/1
$295.99
428.11
Save an extra 0 with the app
682 Reviews

Alfawise U20 Large Scale 2.8 inch Touch Screen DIY FDM 3D Printer - US - Black U20 US Plug

Coupon:

Promotion:

Support COD payment

Warehouse & Fee

Select
CN-099:Ship between: Oct 26 - Oct 27

Product Options

Select
Black U20 US Plug
Visit Store

Reviews (682)

Levon Turaç
Jul 01,2018
My first printer was JGAurora A5 Model. And I took it for a trial. Then I said, let's try some more appropriate models. I found a printer that was about 1000tl cheaper, and I came across the AŞFAVISE U20. I was hesitating at first, but I was shocked when the printer came and printed the first print. 1 month later I will buy the Alfawise U10 model :) What more can I say :) A detailed edition is available in the video. You can see if I open and watch my video from youtube. And if you want to get it, I would be very glad if the video gets over the link below. Step by step: 1- It has high quality metal profile and it does not vibrate at all. (The point where I feared the most) 2- It was easy to assemble (it might look a little against the wiring part, but it is very simple to know, but new areas can work for half an hour :) 3- Heated table is very good to be even other stylish right below: 4- Glass exchange of the heated table is better. In other printers, unfortunately, the heating surface with the glass is adhered and therefore the change is very troublesome, but it is not. 5- The glass plate surface was really good. You can change your mind when you see that the filament is sticking when printing in poor quality. :) 6- Filament sensor is also a big plus. Because it is expensive in the creality brand that does not exist personally. 7- When filament ends or needs to change, printing can resume. The Creality CR-10 doesn't have that feature :) 8- Even if Extruder looks small, he is doing his job very well. 9- Nozzle Warm-up time is very fast in 20-30 seconds and is ready for nozzle printing. The plate warms up later. 10- Z axis height of 40cm is already great at this price. 30 million unfortunate creality. The updated version is the same as this, but the room is more expensive than 1000 TL. 11- High resolution printing is very good. I tried the first print with 0.2mm and the second owl print was printed at 0.1mm and was tremendously high quality and fast. 12- With update up to 0.05mm resolution allows printing. Even if you're working on it, even under pressure can give. 13- Touch control panel is the biggest plus. Easy to use interface and provides seamless adjustment. Creality also does not have touch feature :) 14- Table setting was very comfortable and easy. You can adjust the required leveling on the touch screen and enter your hand comfortably under the table. 15- Do not look at the single Z-Axis motor. I had too many doubts because I had a dual z axis engine and I was happy. But there's nothing wrong with that. He surprised me with that. 16- Nozzle and filament cooling was actually better than JGaurora. 17- Z The attachment of the axle shaft to the roof has already been
View More

Discussion

View More
Does this come with any sort of warranty? Hi! We offer a 45 day warranty.For more :https://www.gearbest.com/about/warranty-and-return.html

Description

Description:
Alfawise U20 is an incredible 3D printer for professionals and amateurs alike. It requires the least effort to set up, so you will be able to finish assembly in just 5 minutes. It boasts high cost-performance ratio - any DIY enthusiast will not be unable to resist. U20 has a large build volume - 300 x 300 x 400mm - designed for big challenges. More importantly, printing with Alfawise U20 is hassle-free because the two resume functions prevent any imperfection and failure due to power outage and filament run-out. Control the process and set parameters on the touchscreen. Enjoy easier and more successful 3D printing!

Main Features:
300 x 300 x 400mm big build volume to print more exciting models
Precision printing with standard 0.4mm diameter nozzle, accurate alignment, and up to 150mm/s speed
● More successful in 3D printing with filament run-out protectionandpower outage protection
2.8'' full color touchscreen for more intuitive control
Fast and easy assembly, only 5 minutes needed to get started
Reinforced aluminum alloy construction, wear-resistant, and durable
● 100 Deg.C max. heat bed temperature, 250 Deg.C max. nozzle temperature for various filaments, such as PLA, ABS, PVA, PP, wood filled, etc.
● Automatic leveling function improving our work efficiency, and easy to operate

Pleaseclick here to download the upgrade firmware
Pleaseclick here to download the user manual
Join the discussion, find technical support, up-to-date information, and share your experiences in the Facebook group.

Tip: the power outage recovery functions well when you print more than 0.5mm in height. If the height is less than 0.5mm, it is recommended to print again.

Reminder:
● Please read and follow the user manual carefully before you assemble or operate the 3D printer.
● Always use the correct AC voltage for your region.
● Please do not place the 3D printer near flammable / combustible materials, or any heat sources.
● Use the 3D printer only in properly ventilated areas. Maintain a safe distance from the printer.
● Due to different batches of products, the appearance of the rack has minor adjustments but not affect of using. Please be informed.

Specification

General

Brand: Alfawise
Model: U20
Type: DIY
Engraving Area: 300 x 300 x 400mm
Nozzle quantity: Single
Nozzle diameter: 0.4mm
Nozzle temperature: Room temperature to 250 degree
Layer thickness: 0.1-0.4mm
Memory card offline print: SD card
LCD Screen: Yes
Print speed: 20 - 150mm / s
Supporting material: ABS,PLA,PP,PVA,Wood Filled
Material diameter: 1.75mm
Language: Chinese,English
File format: G-code,STL
XY-axis positioning accuracy: 0.012mm
Z-axis positioning accuracy: 0.004mm
Voltage: 24V
Host computer software: Cura,Repetier-Host
Packing Type: unassembled packing
System support: Windows / Linux / MAC
Connector Type: SD card,USB

Dimensions and Weight

Product weight: 12.0000 kg
Package weight: 14.3200 kg

Package Contents

Packing Contents: 1 x Unassembled Alfawise U20 3D Printer
Alfawise U20 Large Scale 2.8 inch Touch Screen Aluminium Alloy DIY FDM 3D Printer - Black U20 US Plug
Alfawise U20 Large Scale 2.8 inch Touch Screen Aluminium Alloy DIY FDM 3D Printer - Black U20 US Plug

Alfawise U20 Large Scale 2.8 inch Touch Screen Aluminium Alloy DIY FDM 3D Printer - Black U20 US Plug
Alfawise U20 Large Scale 2.8 inch Touch Screen Aluminium Alloy DIY FDM 3D Printer - Black U20 US Plug
Alfawise U20 Large Scale 2.8 inch Touch Screen Aluminium Alloy DIY FDM 3D Printer - Black U20 US Plug
Alfawise U20 Large Scale 2.8 inch Touch Screen Aluminium Alloy DIY FDM 3D Printer - Black U20 US Plug
Alfawise U20 Large Scale 2.8 inch Touch Screen Aluminium Alloy DIY FDM 3D Printer - Black U20 US Plug
Alfawise U20 Large Scale 2.8 inch Touch Screen Aluminium Alloy DIY FDM 3D Printer - Black U20 US Plug


Alfawise U20 Large Scale 2.8 inch Touch Screen Aluminium Alloy DIY FDM 3D Printer - Black U20 US Plug




Alfawise U20 Large Scale 2.8 inch Touch Screen Aluminium Alloy DIY FDM 3D Printer - Black U20 US Plug

Alfawise U20 Large Scale 2.8 inch Touch Screen Aluminium Alloy DIY FDM 3D Printer - Black U20 US Plug


View More 

Recommended Products

Sponsored Products

New Member's Bonus: $10 Coupon
$295.99

Alfawise U20 Large Scale 2.8 inch Touch Screen DIY FDM 3D Printer - US

Color

Size

Quantity - +
installments: choose
loading...
loading...
cancel
loading...
loading...
loading...

Reviews

4.76 *****
  • 540
  • 134
  • 2
  • 1
  • 5
  • All ( 682 )
  • ( 173 )
  • ( 35 )
Levon Turaç
Jul 01,2018
My first printer was JGAurora A5 Model. And I took it for a trial. Then I said, let's try some more appropriate models. I found a printer that was about 1000tl cheaper, and I came across the AŞFAVISE U20. I was hesitating at first, but I was shocked when the printer came and printed the first print. 1 month later I will buy the Alfawise U10 model :) What more can I say :) A detailed edition is available in the video. You can see if I open and watch my video from youtube. And if you want to get it, I would be very glad if the video gets over the link below. Step by step: 1- It has high quality metal profile and it does not vibrate at all. (The point where I feared the most) 2- It was easy to assemble (it might look a little against the wiring part, but it is very simple to know, but new areas can work for half an hour :) 3- Heated table is very good to be even other stylish right below: 4- Glass exchange of the heated table is better. In other printers, unfortunately, the heating surface with the glass is adhered and therefore the change is very troublesome, but it is not. 5- The glass plate surface was really good. You can change your mind when you see that the filament is sticking when printing in poor quality. :) 6- Filament sensor is also a big plus. Because it is expensive in the creality brand that does not exist personally. 7- When filament ends or needs to change, printing can resume. The Creality CR-10 doesn't have that feature :) 8- Even if Extruder looks small, he is doing his job very well. 9- Nozzle Warm-up time is very fast in 20-30 seconds and is ready for nozzle printing. The plate warms up later. 10- Z axis height of 40cm is already great at this price. 30 million unfortunate creality. The updated version is the same as this, but the room is more expensive than 1000 TL. 11- High resolution printing is very good. I tried the first print with 0.2mm and the second owl print was printed at 0.1mm and was tremendously high quality and fast. 12- With update up to 0.05mm resolution allows printing. Even if you're working on it, even under pressure can give. 13- Touch control panel is the biggest plus. Easy to use interface and provides seamless adjustment. Creality also does not have touch feature :) 14- Table setting was very comfortable and easy. You can adjust the required leveling on the touch screen and enter your hand comfortably under the table. 15- Do not look at the single Z-Axis motor. I had too many doubts because I had a dual z axis engine and I was happy. But there's nothing wrong with that. He surprised me with that. 16- Nozzle and filament cooling was actually better than JGaurora. 17- Z The attachment of the axle shaft to the roof has already been
Suggestion:
Actually, there's not too much. This is not considered as a minus property for this price. But still write. 1- It is much better if there is a Dual Z stepper motor. 2- Cable clutter needs some more edits. 3- It would be better if they made the cables a little longer. That would be easy for the users to make the cable layout. 4- It would be perfect if they increased the price a little and added a BL-TOUCH sensor. Because now I think it is necessary to have Auto level in each printer. But as I said at this price Creality CR-10 SOLID :) Creality friends who know garbage. It was sold out too and the prices were very excessive. It was cheaper at first, but not worth it.
mark
Sep 06,2018
I started off with a small printer, to learn how these work before going for larger print volumes.. the u 20 IS THE LARGER PRINT VOLUME. it was easy to assemble, had it together in about 20 minutes. the packaging was great, everything was secured in the box well. I joined the facebook group alfawise u20 and I believe everyone purchasing this printer should, as updates are offered for download to keep your system updated when new things are added... I've had no negative issues with the printer, the heated bed works well and warms quickly. I had my first storm power outage and the power resume worked as intended. it simply warmed up the hot end, homed the x and y and continued printing.. that's awesome.. I would print a spool holder for it as the one provided has trouble with full sized spools of plastic. it works well for the provided spool though.. I cannot wait to really get some hours under this printers belt and watch the great things it prints for me... I love movie props and statues, so this bed size is going to be fully taken advantage of... this is a great printer and the price is nice. join the facebook group, take advantage of the updates and learn from the other nembers, maybe I'll see you there..
Irene
Jun 15,2018
My son had asked me to buy an open-frame FDM 3D printer for him, because he loves 3D printing lessons and feels proud of his 3D-printed models. They are something extraordinary. After the admission, I though it might help with his major in the university. Now that my son is interested in 3D printing, he can keep himself occupied before the beginning of the new semester and studied a lot of knowledge. After several long hours prints (about 2 - 3 days), he gave a positive review and put it online. According to him, the nozzle will not be clogged and the printing quality is great when the extruder is working at a high speed. Indeed, the details of the models he made are fascinating. What he likes the most is the combination of printing directly from Micro SD card, filament run-out protection and power cutoff protection. Because 3D printing takes much longer time, these three features help to avoid any possible imperfection and restart. He thought the problems are not a big deal and many can be easily fixed. For example, he replaced the cooling fan, and ignored the scratches on the gantry caused during the shipment.
Henry
Jun 05,2018
I waited 2 days to get my first print which takes up the full size of 30 x 30 x 40cm. It is incredibly perfect. Certainly, there exist some noise which is unavoidable for FDM printers. The better the filament you use, the higher printing quality will be. It takes me only 6 minutes to finish connecting the frames and the cables, although I did not have a look at the instruction. This is because there are labels at the end of the cable, so what you need to do is only to match them. It is easy and time-saving! I also like inserting a TF card to print, so I do not need to keep the computer operating for tens of hours. As to its disadvantages, the 3D printer had not been packed well, although everything inside is intact. Different parts needed to be separate apart. Evidently, this is something that you should think highly of.
juan carlos rueda
Jun 29,2018
-All the printer is built with metal parts, which gives a great consistency. -A single motor in Z, so that desynchronisations are avoided! -Electronic of 32bits with 24v source and touch screen. Isolated printer electronics. -Extruder of short distance, with built-in layer fan. -The hot bed comes with an adhesion plate for the printed pieces, buildtak style. -Vslot wheels on all axes, so it has a great smoothness of movement. -The extruder is already modified with a filament sensor. Filament on a stand to put on the table. -It comes fully equipped, with tools, a 200gr coil of gift pla and a needle to unclog the nozzle.
Suggestion:
-The only thing is that the firmware is closed, waiting for it to be released.
Michael
Jun 14,2018
Easy to assemble! Easy to use! Quality printing! I had been expecting the arrival of Alfawise U20 after I had ordered it. It took me about 10 minutes to put the three parts together and finish leveling. Really fast! Another good thing is that the glass plate is flat, so I did not need to replace it. After testing several small prints and full-size prints, I concluded that the printing precision is great, and the salmon skin that the printer produces is exquisite. The layers are perfectly aligned even it is operating at 150mm/s. This is incredible! A little paint came off from the metal frame. The package needs to be improved; the spool holder does not support 1kg filament, which is a pity. However, the problems are minor.
Martin
Jun 23,2018
As an architect, I am crazy about printing buildings. It is like accomplishing a new one within about ten hours in the reality. I have used Alfawise U20 to create two prototypes of the buildings and I am amazed at the exquisite details. The models are solid and nice-looking. Because I've learned 3D modeling before, it did not took long for me to create the G-code files. The 3D printer is easy to use! However, I have to say that the interface of the color touchscreen needs to be improved. It doesn't look great, although it works well. Sooner or later, my house will be filled with fantastic 3D-printed buildings.
Madou
Jun 25,2018
The Alafawise U20 printer perfectly meets my expectations. What made me decide to order this is the fact that it has a touch screen thing that other printers do not have in this format, but what is very practical is its end-of-filament detector which, in the event of a reel end, can be used to reset another without the printing being canceled. It's very regular to have power outages at home, with the system integrated in the printer, it is possible to resume where it left off. Its assembly took me no more than 15 minutes because everything is practically mounted. You just have to assemble the gantry with its base. Regarding delivery, I re? u under two weeks as announced by Gearbest. I can only recommend it.
Amoury Jacques
Oct 28,2018
Very correct packaging that has withstood the long trip China France, although the polystyrene used is of less durable appearance than those of Tevo printers. The unpacking and assembly is very easy and very fast, beautiful machine finish. There was no adjustment to be made I appreciated the presence of cutting pliers, the PLA coil and the quality of the spatula. I also liked the many models on the SD card Start-up required adjustment of the Y-axis backstop that had to be advanced to prevent the nozzle from striking and driving the front-panel tray clamps. For the moment, all the impressions went well and I am satisfied with this purchase J.AMOURY
Candy
Jun 10,2018
Alfawise U20 offers the same performance as Creality3D CR-10, whereas, it is $188 cheaper. The features of Alfawise U20 are very useful, especially the filament run-out protection and power outage protection. I'm glad that I've bought Alfawise U20, because it saves a lot of troubles and I don't need to restart printing from the beginning anymore. I've joined the Facebook group, Alfawise U10 & U20 3d Printer Group and found this group is amazing. There are many enthusiasts in the group, and your questions will be answered immediately by the development team. The services are what you cannot get from Creality3D CR-10.
View More
View More
View More