1, power supply AC220-240V, 50Hz;
2, turn on the electricity, heating, fan rotation, do not press any button under the default 12 hours.
3. Press the time key to switch to the timing setting, the old = press +- key to set the timing time, the new = press the time key to set the time and then press the time key to switch back to the temperature setting;
4. The initial display temperature is 20 degrees Celsius, the temperature is set by the upper and lower keys to set the temperature, the range is 15-32 degrees Celsius, and the time is set to set the timing for 1-12 hours.
5, according to the fan key switch high (HH) low (LL) two fan speed;
6. Reach the set temperature, cut off heating, the fan continues to work 60 seconds after the stop, the screen shows OF, below the set temperature - 1, re-heating;
7. Arrival time (default 12 hours if not set), cut off heating, the fan continues to work 60 seconds after the stop, the screen shows OF;
8. After the work is finished, press any key to start work again (no time is set, then the default is 12 hours).
9. If there is a natural wind function, press the +- button for three seconds to start and display CC; continue to press the +- button for three seconds to close, showing the natural wind set before starting.
10. Ceramic heating: with corrosion resistance, high temperature resistance, long life, high efficiency and energy saving, uniform temperature, good thermal conductivity, fast thermal compensation, and does not contain lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ether and other harmful substances, in line with the European Union RoHS and other environmental requirements