1. Carne wood, bamboo, paper, plastic, leather, bamboo, bone teeth, PU, rubber, PVC, leather, clay, crab shell, lobster, fierce, ivory, Bodhi root, resin glasses, gold shaded surface, etc. It is generally used with fire to burning material + a paint ceramic, a paint aluminum, a color cobblestone, etc. Carved part of stainless steel, anodized, dark plating, electrophoresis, paint, wood grain transfer aluminum, can be tank, mobile phone back shell, etc.!
2. Cut paper, skin, nonwoven fabric, flocking cloth, aircraft wood, non-adhesive / 2mm, non-transparent plastic sheet within 2mm, etc.
3. Ceramics. Glass, stone, crystal, jade, jade, etc. Special material, can be carved with laser transfer paper (referred to as color paper). Model selection 5500MW or 7000MW
4. Carving material range and 7000MW (7 watts) basically! But in terms of speed, 10W speed is faster than 7W; additional engraving - Some hard-sized materials, 10 watts of print depth is more than 7 watts More obvious. For example, carving 304 brushed stainless steel, 10W watt burning is greater, the effect is more obvious!
5. Cannot engrave: No surface-processed pure aluminum plate, brass, silver, iron plate, and galvanized panel, etc.
Input voltage: 12-16V
Rated power: 10W
Wavelength: 448-462 nm
Output: Continuous wave
Focal distance: 1.3cm fixed distance
Work temperature: 0 ~ 70 degrees
Control signal: PWM frequency is less than 100kHz
1. Laser Power Module Is Relative Large, Eye Contact Is Prohibited, Otherwise It Will Lead To Permanent Blindness, A Natural Consesequence
2. Do Not Use Flammable Gas and The Environment, in Order to Avoid Fires and Explosions.
3. Prohibition of Child Exposure to This Laser Product.
4. Do Not Open The Module To Prevent Damage. The Engraving Can Not Be Transparent, Reflective or Mirror Materials and Metals.
6. Each Laser Power Can Be Clearly Carving Materials, Other Materials, Not Recommended ENGRAVING, IT WILL DAMAGE THE LASER