Eazmaker Laser Module 7000MW Adjustable Focus PWM Mode for Desktop Laser Engraving Machine - Black

Specifications:
Can carve wood, bamboo, paper, plastic, leather, bamboo, bone teeth, pu, rubber, pvc, cowhide, horns, crab shell, lobster, mammoth, ivory, bodhi root, resin glasses lens, gold spray paint surface, etc. Generally, materials that can be burned with fire + ceramics with lacquer, aluminum with lacquer, colored pebbles, etc.
It can engrave some stainless steel, anodized, dark electroplating, electrophoretic paint, baking varnish, wood grain transfer aluminum, coke cans, mobile phone back shells, etc.
(Can be cut) Paper, leather, non-woven fabric, flocking cloth, airplane wood, stickers / non-translucent plastic sheet within 2mm, black acrylic within 2mm, etc. within 3mm
Special materials such as ceramics, glass, stone, crystal, jade, jade, etc. can be carved with laser transfer paper (color paper for short). Model selection 5500mw or 7000mw
Engraving is not allowed: pure aluminum plate, brass, silver decoration, iron plate and galvanized plate without surface treatment
Input voltage: 12-16V
Rated power: 10W
Wavelength: 448-462nm
Output: continuous wave
Focal length: 3 to 6 cm, focusing
Working temperature: 0～70 degrees Celsius
Control signal: PWM frequency is less than 100K Hz

Note:
Laser power module is relatively large, eye contact is prohibited, otherwise it will lead to permanent blindness, a natural consequence
Do not use flammable gas and the environment, in order to avoid fires and explosions
Prohibition of child exposure to this laser product
The tube. Then well insulated, it can be plugged in directly lit
Do not open the module to prevent damage
The engraving can not be transparent, reflective or mirror materials and metals
Each laser power can be clearly carving materials, other materials, not recommended Engraving, it will damage the laser