Fast and Precise Engraving
Ortur Laser Master is a portable laser engraving machine, which is easy to install and safe to operate. It has a built-in sensor accelerometer. When the machine tilts, it will automatically stop laser work and protect against laser damage. Support for GRBL open source software for operating fun. It supports dynamic control laser module, and PWM power regulation, low brightness regulation, laser temperature induction protection. It also supports lasers of different powers, so that this is a great device for DIY project.Main Features
- 32-bit Motherboard with STM32 chip, more powerful, faster, higher precision. Easy to adjust the speed (0-3,000mm/min) and power (S0-S1,000) for both of engraving and cutting.
- Active position protection, there is a G-sensor on the motherboard for active position protection. If the machine detects unauthorized movement, the laser beam will stop.
- Laser beam safety guard, if your computer system halted, led to that the laser engraver stop moving, the laser beam will stop.
- Exposure limitation, after the laser beam is turned on, but there is no movement for a long time, it will automatically stop. Weak Light Mode: the laser beam automatically stops after 100 seconds. None Weak Light Mode: based on the power level, the laser beam automatically stops within 10 to 60 seconds.
- LaserGRBL is the most popular carving software in the world, could import different format images, you could editing in PhotoShop, Inkscape, CAD, etc. and then connect to the laser engraver via LaserGRBL for engraving and cutting.
- This laser engraver supports PWM mode.
- Pre-assembled parts, just need 5-10 minutes to install the machine.
- 160 x 150 mm engraving area.
- Aluminum profile + acrylic materials machine body.Specifications
Image format: NC, DXF, BMP, JPG, PNG
Operating system: Win XP, Win 7, Win 8, Win 10
Image size: 2000 x 2000 pixels / 0.075mm dot pitch
Power adapter output voltage: 12V
7W carving: wood, bamboo, cardboard, plastic, leather, PCB, aluminum oxide, paint finish metal.
LightBurn ( paid software, lightburnsoftware.com ) supports Windows, Mac OS, and Linux. It's the most popular paid carving software in the world, very easy to use.Note:
1.Please wear protective glasses when operating the machine.
2.Please do not touch the laser emitter with your hand, or it may burn your hand.
3.Please avoid strong impact on the machine.
4.Children under 14 are not allowed to use this product and children over 14 need adult supervision.
5.The light engraving machine cannot be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.
6.This product is not recommended for industrial cutting due to its high engraving speed.Click here to download the manual