Launch our Cool Free App!
Get $3 Off 1st Order.
MAX WATTAGE: 72W max wattage, these connectors can be used for both low and high wattage light strip.
FIREPROOF MATERIAL: They are not made from cheap flimsy plastic like others. They are made from PBT material,which is heat resistant, anti-burning and no Fire Hazard.
GOOD PERFORMANCE: The led light strip can be locked and connnected very tightly by the connector. 4 Pin LED Light Strip Connector better than the corner connectors because you don't waste space with the wires that connect them, the two strips literally join together right at this connector.
EASY TO USE: Open the wire clip. It should snap open with just a little effort.Insert your 10mm LED light strip inside the clip underneath the two contact prongs, making sure the side of the strip aligns with the + symbol.Close Snap the wire clip shut. Gently pull on the wire to confirm you've secured the strip inside the connector. If you need to solder it with light strip cable, you had better use less tin in order to avoid short circuit.
MAKE SURE you put the led strip under the pins and not on top. Also be sure to cut along the suggested line evenly so there is room for a proper connection on each side. We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience.
Product size:8mm/10mm / 12mm
Product connector: 8mm 2PIN /10mm 2PIN /10mm 4PIN/12mm 5PIN(Optional)
Operating voltage: DC5-28V
Packing: 5 x Connector or 20 x Connector