Main Features
-----Specifications:
Battery capacity: 2600mAh.
Temperature Setting: 4 files.
Display: Led light indicator.
Power: 100W.
Charging time: 2~3hrs.
Charging method: Micro USB.
Size: 90mm*67mm*160mm
-----Temperature Control:
(1) Low gear (lights are bright blue) Temperature: 450F, heating cycle for 100 seconds (30 seconds to reach the set temperature, there is a buzzer sound, and maintain a constant temperature for 70 seconds, there is a buzzer sound);
(2) Mid-range (indicator is bright green) Temperature: 500F, heating cycle for 100 seconds (30 seconds to reach the set temperature, there is a buzzer sound, and maintain a constant temperature for 70 seconds, there is a buzzer sound);
(3) 3. High-grade (lights are red) Temperature: 550F, heating cycle for 100 seconds (30 seconds to reach the set temperature, there is a buzzer sound, and maintain a constant temperature of 70 seconds, there is a buzzer sound);
(4) The highest grade (lights are bright white) Temperature: 600F, heating cycle for 100 seconds (30 seconds to reach the set temperature, there is a buzzer sound, and maintain a constant temperature of 70 seconds, there is a buzzer sound);
-----Working Procedures:
(1) Press the switch 5 times continuously to display the battery indicator;
(2) After starting, press the button three times to switch the temperature file for a total of 4 speeds;
(3) After starting, press and hold the button for 3 seconds (short sound of the buzzer) to turn on the heating mode; the indicator light will always flash during the heating process (the color of the flashing light is the same as the temperature of the temperature light), and there is a buzzer when the heating time is up. Long ringing; at the end of a heating cycle, the buzzer sounds twice; during heating, press and hold the button to stop heating;
(4) After switching on and off, standby for 5 minutes, shut down;
-----Introduction:
1. Power display: After starting, press to display the battery
(1) Red: represents the battery voltage is less than 3.5V;
(2) Yellow: indicates that the battery voltage is between 3.5V and 3.7V;
(3) Green: the battery voltage is between 3.7V and 3.9V;
(4) Blue: indicates that the battery voltage is greater than 3.9V;
2. Matching mode: If you change the heating element, press the button 8 times in succession to match the battery with the heating element and restore the factory settings.
3, charging method: Micro-USB 5V direct charge, battery input current limit 2A, charging time: 2H or so;
4. Safety warning:
(1) Red light flashes 3 times: low battery;
(2) Red flash 5 times: short circuit;
(3) The red is always on: overheating;
-----Package Includes:
1 x SOC base.
1 x Glass Attachment.
1 x Atomizer.
1 x Carb cap.
1 x Aromizer cover.
3 x Ceramic bowls
3 x Cotton swabs
2 x Alcohol pads
1 x Loading tool
1 x USB cable
1 x Wax container
1 x Use manual
Specification