Launch our Cool Free App!

Get $3 Off 1st Order.

Launch App
TSKY 120A Sensored Brushless ESC Electronic Speed Controller for RC Car Model
TSKY 120A Sensored Brushless ESC Electronic Speed Controller for RC Car Model
TSKY 120A Sensored Brushless ESC Electronic Speed Controller for RC Car Model
TSKY 120A Sensored Brushless ESC Electronic Speed Controller for RC Car Model
TSKY 120A Sensored Brushless ESC Electronic Speed Controller for RC Car Model
TSKY 120A Sensored Brushless ESC Electronic Speed Controller for RC Car Model
1/1
$32.51
32.51
16 Reviews

TSKY 120A Sensored Brushless ESC Electronic Speed Controller for RC Car Model - Blue

Coupon:

Promotion:

Support COD payment

Warehouse & Fee

Select
HK:Ship between: Nov 16 - Nov 18

Product Options

Select
Blue

Reviews (16)

DAN
Mar 03,2016
Power source used: HKing 3S LiFePo4 4200 batteries. Used on: HKing Vandal with 3300KV generic brushless sensorless motor. I made it "waterproof" (I hope :) ) using Nanoprotech spray; disassembled it, sprayed it on, than assembled it back; Added extra layer of cheap eBay thermal pads (cheapest I found really); Used a power analyser to check the Amps the motor draws; It was about 70 Amps max with the config I had; About the product: - the fan is rated for 12 Volts, so using it with 2S LiPo will get the ESC hot in the long run, so keep that in mind; if you use 2S I would recommend using a proper fan; - good build quality, good solder joints; Programming the thing :) - use set button + manual (that I do not remember having it in the box) - did not use this method; - use USB Programming Adapter for HobbyKing X-Car 120A & 60A ESC; PRODUCT ID: 351000018 - I used this method, it works great! - use Turnigy Speed Controller Programming Card; PRODUCT ID: TG-Prog - I used this method, it works great also! No overheating issues, but that is normal considering the 9.9 Volts supplied by the LiFePo4 3S; Other users experienced problems using regular LiPo 3S and/or sensored motors. With my setup it was not the case, so for me it worked good. Exact same size as HKing 120 X-Car ESC, but I think the inside is different;
View More

Discussion

View More
Is there any special set up procedures for this esc. I wonder what the small red push button on the ON/OFF switch might be required to do? many thanks CR Hello C ruddick,Sincerely sorry for the late reply.There is not any special set up procedures for this esc.Thank you.

Description

Main Features:
Suitable for cross-country running, less than 1 / 10 scale big cars
120A continuous current, transient current 760A
Support the 2-4 lithium battery or 4-9 Ni MH battery
High quality PCB plate, current and capability, good linearity

TSKY 120A Sensored Brushless Speed Controller ESC for 1/8 1/10 1/12 Scale RC Car Crawler- Blue

Can be no brush and no sense of brushless mode (a sense of need a sense of brushless wire)
BEC output: 5V / 3A, switch mode

Specification

General

Type: ESC

Dimensions and Weight

Product weight: 0.0740 kg
Package weight: 0.1000 kg
Product size (L x W x H): 27.30 x 4.50 x 3.80 cm / 10.75 x 1.77 x 1.5 inches
Package size (L x W x H): 15.00 x 6.00 x 5.00 cm / 5.91 x 2.36 x 1.97 inches

Package Contents

Package Contents: 1 x ESC
TSKY 120A Sensored Brushless Speed Controller ESC for 1/8 1/10 1/12 Scale RC Car Crawler- Blue
TSKY 120A Sensored Brushless Speed Controller ESC for 1/8 1/10 1/12 Scale RC Car Crawler- Blue

Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

Disclaimer:
We do not accept any responsibility or liability for the incorrect purchase of our products. All of the products on the website are extensively tested to comply with rigorous and strict QC standards. For all of our clothing products, items and accessories, please take careful note of the precise measurements, mainly shown in centimeters (CM). As part of our company policy, we will not be able to accept returns or provide refunds for items which are the wrong size.

View More 

Recommended Products

Sponsored Products

New Member's Bonus: $10 Coupon
$32.51

TSKY 120A Sensored Brushless ESC Electronic Speed Controller for RC Car Model

Color

Quantity - +
installments: choose
loading...
loading...
cancel
loading...
loading...
loading...

Reviews

4.44 *****
  • 12
  • 2
  • 0
  • 1
  • 1
  • All ( 16 )
  • ( 10 )
  • ( 2 )
DAN
Mar 03,2016
Power source used: HKing 3S LiFePo4 4200 batteries. Used on: HKing Vandal with 3300KV generic brushless sensorless motor. I made it "waterproof" (I hope :) ) using Nanoprotech spray; disassembled it, sprayed it on, than assembled it back; Added extra layer of cheap eBay thermal pads (cheapest I found really); Used a power analyser to check the Amps the motor draws; It was about 70 Amps max with the config I had; About the product: - the fan is rated for 12 Volts, so using it with 2S LiPo will get the ESC hot in the long run, so keep that in mind; if you use 2S I would recommend using a proper fan; - good build quality, good solder joints; Programming the thing :) - use set button + manual (that I do not remember having it in the box) - did not use this method; - use USB Programming Adapter for HobbyKing X-Car 120A & 60A ESC; PRODUCT ID: 351000018 - I used this method, it works great! - use Turnigy Speed Controller Programming Card; PRODUCT ID: TG-Prog - I used this method, it works great also! No overheating issues, but that is normal considering the 9.9 Volts supplied by the LiFePo4 3S; Other users experienced problems using regular LiPo 3S and/or sensored motors. With my setup it was not the case, so for me it worked good. Exact same size as HKing 120 X-Car ESC, but I think the inside is different;
Suggestion:
- fan a bit slow even with 3S, so that might be a problem over time...
Marcos
May 21,2016
Beatifull esc looks like an expensive esc great quality of construction an can be programed with hobbywing program card the one you can connect to pc and can also change software, great esc and super low price.
Suggestion:
i recomend to change the fan with a 6v fan because it came with a 12v fan.
Thobias Vincensi
Sep 12,2016
High quallity for the price. unbeatble price. Upgradeble with Hobbywing LCD program box. works like a hobbywink 2.1v.
Suggestion:
No cons.
Alfredo
Dec 21,2017
Excellent TSKY 120A Sensored Brushless ESC for 1/10 and 1/8 car, good quality and low cost
Suggestion:
none
ANU
Sep 14,2016
Decent Price for the Specs. Build quality is good. Still need to test.
Suggestion:
None.
Vancsa
Aug 05,2017
Great esc for the price. Got 2, have been using them on 3s for months
shayne britton
Dec 30,2017
great esc you can program with hobbywing program boxs
Suggestion:
none so far
maria mar
Sep 26,2017
Funciona perfectamente, programable, sensored impecable. Montado en mi 1/10 con 2s no hay problema de ventilador.
Suggestion:
Nada en general, podria ser estanco, pero por este precio...
Alfredo
Aug 22,2018
El esc se ha vuelto loco por contacto por cables pelados.
Suggestion:
El esc se ha vuelto loco por contacto por cables pelados
Neto
May 22,2018
Produtor. Muito bom bem construído e muito bom recomendo.
Suggestion:
Nada
View More
View More
View More