Description: This TPMS is easy to install and convenient to use, a perfect safety measurement device for your motorcycle!
Main Features: - Specially designed for motorcycle with 2 valve-cap sensors - Waterproof IP67 and dustproof display - Two ways for display mounting: clip on handle or stick on dash - Flexible sensor installation: without hassles or any breakdown of tires - Convenient to use: sensor preset in factory, no pairing is needed - Replaceable battery for valve-cap sensor: CR1632 - Green tire indicator lights up every 2 seconds to show the real-time tire pressure of the corresponding tire. Tire indicator turns red with corresponding tire data once abnormal tire data detected - Pressure and temperature units convertible: the end users can set the threshold of tire pressure and temperature - Adjustable monitoring pressure range: 0 - 4.5Bar / 0 - 65PSI - Visual and audible warning - Self-testing for each power on - The display brightness will be reduced 25 seconds after each power-on, pressing SET power button for power saving
Package weight: 0.6540 kg
Package Size(L x W x H): 19.50 x 18.50 x 10.00 cm / 7.68 x 7.28 x 3.94 inches
Package Contents: 1 x Display, 1 x Adhesive Holder, 1 x Clamp, 1 x Sensor Tool, 1 x Washer, 3 x Nut, 2 x Dustproof Cover, 2 x Sensor, 1 x Accessories Case, 1 x Spanner
IPXX Rating Chart
The IP Code (or International Protection Rating, sometimes also interpreted as Ingress Protection Rating*) consists of the letters IP followed by two digits and an optional letter. As defined in international standard IEC 60529, it classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. The standard aims to provide users more detailed information than vague marketing terms such as waterproof.
The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. For example, an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. IP22 or 2X are typical minimum requirements for the design of electrical accessories for indoor use.