Launch our Cool Free App!
Get $3 Off 1st Order.
◇ Ancel new Head-up display, using 5.8 inches with high-definition HUD display, combined with HUD and TPMS Monitoring together. Connect via OBD2 cable, the OBD2 scan function included.
◇ The functions of the tire pressure monitoring system include air leak alarm, low voltage alarm, high voltage alarm, high temperature alarm, and sensor low electricity alarm.
◇ Colorful screen, and eye-protective design, check car data safely with the head-up display, can automatically adjust the brightness, make sure safe driving.
Product Display Data
● Vehicle speed, engine speed
● Water temperature
● Battery voltage
● Tire pressure and temperature
● Instantaneous fuel consumption
● Average fuel consumption
● Tirp mileage measurement
● Shift reminder
● Fatigue driving reminder
● Low voltage alarm
● High water temperature alarm
● Over-speed alarm
● Engine fault alarm
● Fault code clear
● Automatic switch of km and miles
1.need wait about 2-5 minutes match data from ECU and TPMS sensor when first time use
2.Display data need setting follow user manual and data maybe have a little delay or deviation, if mind about it, please don’t send order.
TPMS External Sensor Feature:
◆ Working voltage: 2.1V-3.6V
◆ Storage temperature: -30’c—85’c(-22’F—185’F)
◆ Working temperature: -40’c—+125’c(-40’F—257’F)
◆ Temperature accuracy: ±2’c
◆ Working pressure: 0-8.0Bar(0-116PSI)
◆ Pressure accuracy: ±0.1BarIP IP67
◆ Transmit power: ≤5dBm
◆ Transmit frequency: 433.92MHz
Our HUD&TPMS provides different SELECTION (PSI/BAR, ℃/℉), the parameter of its is as follow,
◆ Working Voltage: 10-18V DC (12V DC)
◆ Working Temperature: -25 - +85℃ (-13℉~185℉)
◆ Atmospheric Pressure: 86~106KPa (12.5~15.4PSI)
◆ Relative humidity: 10%-95%
◆ Ambient noise: ≤60dB(A)
◆ Alarm sound level: ≥0dB(A)
TPMS External Install Steps
1, Unsrew tire spiracle cap
2, Screw the self-locking nut to the valve and screw it down
3, Tighten TPMS sensor on the valve
4, Reverse lock the self-locking nut with special wrench