This new copy of the remote controller can learn the fixed code remote control, the remote control code can be compatible with 64bit of internal codes: like 2262, 2260, 5026, 5326, 5326 - 3, 5326 - 4, FP527, PT2240, EV1527, HT6010, HT6014, HT12E, HT640, HT680, PLC168, SMC series, 9XX, PT2292, 12L - 4SC, HT6026, UM3750AM and so on.
● One-to-one key copy, password of each key is saved individually.
● Can continuously repeat for one million times.
● Good privacy, especially suitable for home use.
● Powered by 1 x 27A battery ( included ).
● Fixed frequency: 330MHz, 315MHz, 433MHz.
● Adjustable frequency: the frequency adjustment of general machine factory in the vicinity of 315MHz, if the remote controller of guest is this frequency, can be directly copied after the completion of the trial; if not, please adjust it until the reaction occurs after pulling away as far as fine-tuning. If you have a remote copy machine, you can use frequency measurement function to debug accurately. Because this machine has hardware decoration, please lower 2 - 3MHz, and finally install the shell as the standard.
Method of use:
1. Clean the test code before copy: long press the 2 keys of remote control for 3s, release them when the light flashes quickly to slowly flashes, and then click any key, light does not turn on, means the code has been removed.
2. Hold and not release the copy key of this controller, corresponding to press the key of your controller and close to the receiving antenna about three seconds, release them after the indicator light turns on to slowly flashes, and fast flash. Then try to press this key, light is turn on, learning success.
3. The same operation for other key copies.