Launch our Cool Free App!

Get $3 Off 1st Order.

Launch App
0 - 25mm Home Teaching Equipment Outer Diameter Micrometer Spiral Micrometer
0 - 25mm Home Teaching Equipment Outer Diameter Micrometer Spiral Micrometer
0 - 25mm Home Teaching Equipment Outer Diameter Micrometer Spiral Micrometer
1/1
$13.57
13.57

0 - 25mm Home Teaching Equipment Outer Diameter Micrometer Spiral Micrometer - Blue Ivy

Coupon:

Promotion:

Support COD payment

Warehouse & Fee

Select
CN-099:Ship between: Jun 23 - Jun 25

Product Options

Select
Blue Ivy

Discussion

Description

Product Name: Micrometer
Product size: 135mm
Material composition: high carbon steel
Product Description: For customers with high accuracy and error requirements, it is not recommended to buy, suitable for home / teaching
Product description:
The outer diameter micrometer is an outer size measuring instrument that uses the principle of the spiral pair to read the distance between the two sides of the architecture. The outer diameter micrometer is mainly used to measure various outer dimensions.
The outer diameter micrometer has a division value of 0.01 mm, and the upper limit of the measurement is not more than 300 mm, and each 25 mm is divided into one specification. Such as 0 - 25mm, 25 - 50mm, and so on.
The form of the outer diameter micrometer is shown in the figure: ( The illustration is for illustration only and does not indicate the detailed structure. )
Instructions for use:
1. Clean the measuring surface and correct the zero position before use. 0 - 25mm is directly meaned to the zero position; 25mm or more is used for the quasi-zero position.
2. Method of correcting the zero position: If the 0 bit line is not flat with the reference line, first loosen the screw with a screwdriver, adjust the position of the reference line with a wrench, justify the reference line with the 0 taste line, and then tighten with a screwdriver. Tightening the screw.
3. When measuring, the micrometer should be perpendicular to the workpiece to be tested, and the force measuring device should be rotated. When the measuring surface touches the workpiece to be tested, the force measuring device should be gently rotated. When the measuring device emits a slight sound, This is the actual size of the workpiece being tested.
4. The locking device can measure the forward and backward movement of the micro screw. Relax to the right and lock to the left.
5. When measuring, the left hand should hold the heat shield to prevent the body temperature from being transmitted to the micrometer, causing measurement errors.
6. One end of the wrench can be adjusted to zero position, and the other end can tighten the force measuring device.
Friendly reminder:
1. The micrometer is a precision measuring tool. When using it, it should be handled gently. After use, apply anti-rust oil to the exposed parts and put it into the box to prevent it from being dry and ventilated.
2. Do not force the micro-cylinder during the measurement to avoid damage accuracy.
3. Do not move the differential cylinder more than 25.5mm to the right to avoid damage to the micrometer and its accuracy.
4. Do not attempt to remove the parts of the micrometer to cause damage and cannot be used.
5. The verification period of the outer diameter micrometer should be determined according to the specific conditions of use.

Specification

Dimensions and Weight

Product weight: 0.3000 kg
Package weight: 0.3500 kg

Package Contents

Package Contents: 1 x Micrometer, 1 x Bag, 1 x Plastic Case

Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

View More 

Recommended Products

Sponsored Products

New Member's Bonus: $10 Coupon
$13.57

0 - 25mm Home Teaching Equipment Outer Diameter Micrometer Spiral Micrometer

Color

Quantity - +
installments: choose
loading...
loading...
cancel
loading...
loading...
loading...

Ship to

Reviews

0 *****
  • 0
  • 0
  • 0
  • 0
  • 0
  • All ( 0 )
  • ( 0 )
  • ( 0 )
View More
View More