Name: The latest highlight daytime running light bendable 6LED Snake
6 lamp size: length 16cm × width 2cm × thickness 1.5cm
8 lamp size: length 20cm × width 2cm × thickness 1.5cm
9 lamp size: length 22cm × width 2cm × thickness 1.5cm
10 lamp size: length 24cm × width 2cm × thickness 1.5cm
12 lamp size: length 28cm × width 2cm × thickness 1.5cm
14 lamp size: length 32cm × width 2cm × thickness 1.5cm
1. Adopt imported LED high-power light source, the lampshade adopts concentrated light output of condenser lens, and the twelve lamp beads are beautiful and generous.
2. With unique physical design, it can be bent at 360 degrees in different orientations; the larger range is suitable for complex installation positions of automobiles;
3. The back is equipped with super-strong double-sided adhesive for sticking. The two ends of the lamp body have screw holes to lock the screws and double insurance.
4. The lamp body is sealed and waterproof. Waterproof rating IP67
Second, use the transformation
It can be used as a daytime running light, fog light, brake light, reversing light, decorative light, license plate light, door light, and chassis light. It only needs to change the line connection mode and installation position;
It is suitable for installation of various models in high, medium and low, and is easy to install; outside the car, the bottom of the car can be installed everywhere.
Third, the performance is stable
Waterproof, anti-aging, energy saving, anti-interference, temperature resistance, anti-collision, excellent performance
Wiring method: Each lamp has two lines of red and black, the red line is connected to the positive pole of the power supply, and the black line is connected to the negative pole. The corresponding power supply can be connected according to different needs.
For example, when the daytime running light can be connected with a red line and an ignition switch, the black line is grounded to achieve automatic illumination of the car;
When the reversing light is turned on, the red light can be connected to the positive light and the negative black wire is connected to the negative pole to turn on the reversing light;
The other power supply is connected to the same principle. The red line is connected to the positive black line and the negative line is to turn off the light.