Launch our Cool Free App!
Get $3 Off 1st Order.
Key Product Features/Bullet Points:
1.Packing listing: Ender 3 Upgrade Dual Z Axis Kit *1SET
2.Product advantages: This is a 100% brand new and use all-aluminum coupling and original 42 stepper motor, stable operation ,Ender 3 Upgrade dual Z Axis kit for Ender 3 Ender 3S 3D Printer
3.The dual Z stepper cable needn't to modify the machine, solder, or replace the motherboard. Simply insert the two motor wires into the motherboard.
4.The Ender 3 Upgrade dual Z Axis kit is using the original T8 leads to 2MM screw and precision screw.
5.Our team strives for 100% customer satisfaction provided guarantee. If there are any problems with our products, contact us and we would be very happy to solve your problems.
Product size:53 * 15 *19cm
Product material:Sheet metal + Stainless steel
42-34 stepper motor*1PC
Lead Screw Bearing Guide*2PCS
Power Supply Holder*1SET
Z Axis Lead Screw Bracket with Brass Nut*1PC
Dual Z Stepper Cable*1PC
Z Motor Bracket with screws and t-nuts*1PC
365mm T8 Lead Screw*1PC
Matching all screws and tools*1SET
Use all-aluminum coupling and original 42 stepper motor, stable operation for Ender 3 Upgrade dual Z Axis kit.
No need to modify the machine, solder, or replace the motherboard. Simply insert the two motor wires into the motherboard.
Within 7 days return, one year warranty, worry-free after sales
After upgrading the dual Z-axis, the X-axis rises steadily from left to right and runs smoothly, completely avoiding the accumulation of bottom consumables, reducing shading caused by Z-axis vibration, and greatly reducing the leveling difficulty and leveling times.
The Ender 3 Upgrade dual Z Axis kit is minimal cost upgrade and maximum optimization
Our this upgrade dual Z axis kit is low upgrade cost, Cost-effective, technical guidance and mature solution
Upgrade the gantry 3D printers such as Creality 3D Ender 3/3S to dual Z-axis to improve printer stability.
Double Z structure runs smoothly
Using the original T8 leads to 2MM screw
1.Turn off the printer, unplug the power cord, and use a hex wrench to remove the two screws which are secure the power supply. Remove the power supply.
2.Install the coupler (④) on the stepper motor (①) and tighten the screws. Use the hexagon socket screws and the Z AxisMotor Bracket (⑦) to fix the motor on the aluminum profile
3.Remove all the screws of sheet metal pulley on the right side of the X axis.
4.Use long screws to fix the Z-axis sheet metal (⑤) and install it on the X-axis right sheet metal. Screw the T8 screw (⑧) into the screw nut to the coupler, and tighten the screw of coupler .
5.Install dual Z stepper cable(⑥) to the motherboard, and connect two Z motors.
6.Install the Phillips screw and the boat nut on the power supply holder (③) to install the power supply.
7.Place the lead screw bearing guide(②) on the left and right sides of the X-axis aluminum profile and let the Z-axis rise to the highest position. If one side is uneven,turn the corresponding coupler clockwise.
8.Install the lead screw bearing guide(②) and tighten the screws. Pay attention to the alignment position of the mount, refer to the arrow in the figure below.
9.If any Z axis does not run smoothly during operation, please try to loosen the screws corresponding to the Z axis in the circle on the right. If the right
pulley is too loose, adjust the eccentric bolt in the box.