Excelvan Portable LED wifi Android Projector 640*480 AV/HDMI out/USB/SD home theater white
This Portable Mini LED Projector has a built-in Android system which ensures the projector runs stably and smoothly and makes it extreamly convenient to use. It also comes with Rj45 network interface which solved the problem of unstable WIFI signals. This is the only projector which can project vertically in the market. Its light-weight and compact size makes it great if you need a LED projector for personal use. The mini LED projector can project its image onto any surface at 640*480 resolution, and with an adjustable aperture, the portable projector can adjust its image anywhere from 20 inches to 100 inches in size. Plus, connected with mouse, this projector can be used as a little computer.
To use the Portable Mini LED Projector, simply power it on and input your device either through the AV/HDMI out/USB port, or as an SD card. Once the connection has been made, the projector will be projecting. Now take your time and adjust the LED projector’s settings (i.e. screen size, aspect ratio, etc…). The mini projector works best in darker rooms. Please keep this in mind as you operate it.
1.USB/SD input support RMVB/MPEG4 and H.264 format video playing, you can enjoy.
movie/photo/music/txt document quickly and easily!
2.The smallest single chip LCD projector with built-in Android system in the market.
3.Verticalprojection feature allows you to project on the celling.
4.Screen lock feature allows you to turn off the projection but remain other functions.
5.Built-in Android system is more stable and runs more smoothly compare to external Android system.
6.Rj45 network interface can solve the problem of unstable WIFI signals.
7.Connected with mouse, then you get a mini computer.
8.Small size with large capacity which can provide bright projection.
9.LED lamp,long life.
10.Multi voltage:90-240V(can be used worldwide).
11.Made zoom and flip.
3.5" TFT LCD (liquid crystal display) LED lamp
60W led lamp about 20,000 Hours Life
f = 125 mm Focus mode: manual focusing
Manual keystone correction
Vertical ±15 degrees
electronic horizontal/vertical image zoom.
1 ~ 3 meters
Projecting image size
Picture rotation function
2W*2 (audio output)
English/Franais/Espaol/Portugues/Arabic/polish/Russian/Chinese(23 in total)
AC100-240V/50/60Hz (can be used all over the world)
USB HDMI out AV SD.
Video decode standard
L:210 x W:160 x H:90
Projector net weight
Package gross weight
projector panel colour
USB 2.0 Parameters
* Excelvan Portable Mini LED Projector *1;
* User Manual *1;
* Power Cable *1;
* AV Cable * 1
* Remote Controller *1;
* Lens Cap *1;
Beforethe boot,make sure you havecompletedthe connection, such asa personal computer, DVDand other externaldevices,ifanydevices are turned on, it may damage the projector.
Troubleshooting of simple failures:
1)The projector cannot be start
Answer: The power line is not energized. You should insert the power line into the AC socket on the projector and insert the other end into a power socket.Make sure that the switch is enabled in case the power socket has any switch.
Answer:1)start the video signal source to inspect whether the signal cable is correctly connected. 2)Inspect the coonection. 3)select the correct input signal source with the signal source key on the projector or the remote control. 4) Remove the lens.
Answer: 1)Rotate the lens to adjust the focal length of the lens. 2) Adjust the projection angle and direction .Adjust the height of the picture if necessary.
4)Ineffective remote control
Answer: 1)replace it with a new battery. 2) remove the obstacle. 3)the distance from a remote control to a projector shall be no longer than 8 meters.
5)Power light is off while the proojector is not working
Answer:1)Check the power wires and sockets. 2)Turn on the projector again after the temperature dropped .
6)Does it play 3d videos and and which type of 3d supports
Answer: This projector just supports the red-blue 3d, you should download the red-blue 3d sources and with red-blue 3d glasses.
7)Automatic shutdown after wotking for some time
Answer:1)Remove the obstacle. 2)After waiting for voltage stabilization and then start. 3)Turn on the projector again after the temperature dropped.