Retro razors are made by hand, blade hardness is 60 degrees, with 0.5mm thick blade, sharp edge, razor blade is consisted of the shaving knife and the hilt, which is in open style, the razor includes sharp knife head and clip-shaped hilt. The blade head is made of high carbon steel, and a pin hole is fixed between the hilt and the blade head, so that the cutter head has a free rotating space of more than 270 degrees which can easily trim the hair of a beard.
Before shaving the retro razor, clean the razor, scrape the knife on the scraper cloth, then shave, razor can be used repeatedly, the blade may go dull after long, you can be sharpen on the grindstone to improve its sharpness, almost no damage,high carbon steel razor gets high hardness, keep sharpness effect, wear-resistant and other advantages. Applications: Home, barber shop, hotel and so on.
Hilt is made of mahogany handle with high hardness, which makes it durable, the color is purple black, with mountain-like wood grain, material is heavy and uniform, with a sense of clear after polished, the feel is very good, there is also a light wood aroma, with excellent ornamental value.
Hold the razor with the right hand, with the blade downward, prop against the hole of the blade bodys concave side with the right hand thumb, and then hold the hilt with the index finger and middle finger, while use the ring finger and little finger to withstand the hilt. The operation needs to rely on the flexible action of the wrist to shave, do not exerting force through the arm.
Before shaving, wash your face and beard before you soften beard with a hot towel, or use the right amount of men's shaving cream to make a bubble in a bowl, and then apply the foam evenly on the face with beard, and then the beard shall be soft. Shave first in the direction of beard-growing, shave the sideburns and then the cheeks and neck, and then shave the jaw with a 26 angle looking up action. Finally shave the upper lip, because the jaw and upper lip beard are thicker, and need more time to soften. If you still feel that it is not clean enough, then repeat the shaving in contrast to the beard-growing direction. Once shaving finished, use a hot towel to clean the foam or rinse with warm water, then pat the aftershave gently to the chin and lip area with hand. At last wear the post-shaving milk or soothing moisturizing products.
1. Razor maintenance: after use, dry the water and store it with oil. Do not let the sun shine. Do not place in a humid environment. If the maintenance is not in place, a little rust may be wiped off with fine sandpaper to remove the rust spots.
2. Cutting edge protection: The sharpness of the cutting edge is relatively thin. In normal times, it only needs to be back and forth on the scraper cloth to maintain the sharpness. It can only trim the hair, do not cut hard objects, and do not use it as a stationery knife to maintain sharpness.
3. Razor safety: do not touch the knife edge directly with your hand to detect the sharpness. Wipe it with a cleaning cloth or a multi-layer paper towel. The knife belongs to the dangerous object. Do not let the child play it