Eagle Series Eagle-30A Brushed With BEC - Multi

Product Features:
1 Brake: No brake / brake, the factory default is no brake. The opening and closing of the brake can be selected by a jumper cap.
2 Battery type: Compatible with Li-xx (lithium battery) / Ni-xx (nickel cadmium or nickel metal hydride) two batteries, the default value is Li-xx (lithium battery). The battery type can be selected by a jumper cap.
3 Low-voltage protection threshold: The low-voltage protection threshold of the lithium battery cell is 3V, so the low-voltage protection threshold is 6V for the 2S lithium battery pack and 9V for the 3S lithium battery pack. The protection voltage of the nickel-cadmium/nickel-hydrogen battery pack is 4V.
4 Low voltage protection mode: When entering the battery low voltage protection mode, the ESC will gradually reduce the output power.
5 Over-temperature protection: When the ESC operating temperature exceeds 110 degrees, the ESC will reduce the output power for protection. After the temperature drops, the ESC gradually recovers its power.
6 Throttle signal loss protection: When the throttle remote control signal is detected to be lost for 2 seconds, the ESC starts to reduce the output power. If the signal can never be recovered, it will drop to zero output (the power reduction process is 2 seconds for a long time). If the throttle remote signal is restored during the power reduction, the throttle control is resumed immediately.

Characteristics:
1 SCM intelligent control;
2 compatible with lithium batteries and nickel-cadmium/nickel-metal hydride batteries;
3 With multiple protection functions such as input voltage abnormal protection/battery low voltage protection/overheat protection/throttle signal loss protection;
4 can activate or cancel the brake function;
1 Output capacity: continuous current 30A, short-time current 40A (not less than 10 seconds);
2 Power input: 2-3 lithium battery packs or 4-10 nickel-hydrogen/nickel-cadmium battery packs;
3 BEC output: 1A/5V (linear regulator mode - linear mode);
4 PWM frequency: 2KHz.