1. Waterproof and dustproof throughout the weather; (Note: Before using this ESC, please remove the cooling fan and clean and dry immediately after use to avoid rusting the connector.)
2. Designed for RC vehicles with excellent start, acceleration and linearity.
3. Compatible with sensorless brushless motors.
4. Strong anti-current and good heat dissipation performance.
5. Multiple protection functions: low voltage cut-off protection/overheat protection/throttle signal loss protection/motor blocking protection for lithium/nickel batteries/
6. Easy to program and compatible with pocket program cards
Red and silver waterproof ESC, 4.0 gold-plated male single 92g
Continuous / peak current: 60 / 360A, support lithium battery 2-3S,
Nickel-metal hydride 4-9S, BEC output: 5.8V/3A (switch)
1: Low voltage cut-off function is mainly to prevent over-discharge of lithium battery. When using a lithium battery, set a suitable low voltage protection value. Warning: Do not use the default value of "Non-Protect" for lithium batteries! 3.1V, 2.9V, 2.7V, no protection
(Default value is 3.1V).
2:3 boot mode (also known as "punch") from "soft" to "very aggressive" (default)
3: Maximum braking force: (25A, 45A, 60A) 50%, 25%, 75%, 100% (default 50%), (80A, 120A) 25%, 50%, 75%, 100% 25%) .
4: Maximum reverse force: 25%, 50%, 75%, 100% (default 25%)
5: Neutral range: 9% (narrow), 6% (normal), 12% (wide) (default 9%)
Solution card method:
1. Connect the BEC wire to the program car, then open the ESC (80A, 120A button)
2. The green LED flashes 2 times, the LED goes out, that is, the ESC connection program car succeeds, and the red LED lights up the current value of the item. Otherwise, the connection fails.
3. Press the “↓” button to select a different program.
4. Press the "→" button to select the different values of the current program.
5. Please press the “Program” to confirm the above selection. The green LED lights up immediately and goes out within 5 seconds, which means the process is successful.
6. Press the “Reset” button to reset the factory settings.
Sensorless brushless motorcycle
For 2S Lipo or 6 batteries NiMH: 1. Road: 3660 size or smaller motor, KV < 6000
2. Off-road / off-road vehicle / monster: 3660 size or smaller motor, KV < 4000
For 3S Lipo or 9 cell NiMH:
1. On the road: 3660 size or smaller motor, KV < 4000
2. Off-road / off-road vehicle / monster: 3656 size or smaller motor, KV < 3000.