GPTOYS S609 Rirder5 4WD 30-40 min Running Time RC ATV with Four-Wheel Independent Suspension System and Servos Module 40Km/h 2.4Ghz White and Blue
* 4WD, running in all terrains;
* 30-40 minutes running time;
* Anti-crash bumper, add more fun;
* lightweight car---- full high-speed;
* Servos module----straight running without offtrack;
* Waterproof---- play in rainstorm and snow;
* when one wheel stuck, the other three wheels are still working;
* Nylon engineering material----the trunk body is more solid and flexible.
Rirder5 S609 adopts the nylon engineering material, which has the excellent mechanical ability,
durability, corrosion resistance and heat resistance.It helps the truck body to become
more solid and flexible. This two abilities also make the truck more suitable for all kinds of terrains.
Rirder5, RC ATV comes with 4WD system. Using one high-speed motor to power four tires to realize the ambition of high-speed driving. More stable and more rapid.
The AVT is light enough that it's almost floating on top of the grass.
180 high-speed brushed motor,30-40 minutes running time, more anti-crash, low friction & high grip, experience incredible fun.
Running in pavement, gravel, dirt, beach, ditch, snow.
Product Weight: 0.313KG
Package Weight: 1.000KG
Color: White and Blue
product Size (L x W x H): 18.5*14*9cm
Package Size (L x W x H): 21.5*17*21cm
Radio System: 2.4GHz
Front/Rear Tires (glued): Soft-Compound Slicks
Drive System: Shaft-Driven 4WD
Battery Type: Li-ion
Battery Voltage: 3.7v
Battery Capacity: 800mAh
Charging Time: about 120minutes
Playing Time : about 30min
The topspeed : about 40Km/h
Operating Frequency: 2.4GHz
Max Transmission Distance: 100m
Battery: 3xAAA Batteries
1 * GPTOYS Rirder5 S609 OFF-ROAD ATV
1 * 2.4G transmitter
1 * USB charging wire
1 * Battery charging box
2 * 3.7V 800mAh Li-po batteries
4 * Spare tires
1 * Hexagon wrench
4 * Pins
1 * Instruction manual
GPTOYS S609 FAQ
Q: How to bind the transmitter to the receiver
For the first-time connection, to complete binding as below is a must!
Step 1: Turn on the vehicle
Step 2: Press and hold down the bind button, and then turn on the transmitter.
Please note that the binding process is completed until the flashing red light turns to solid
red! For more specific instructions, please refer to the Manual.
To complete successful binding, please do not release the BIND button when you turn on the transmitter.
Always switch OFF the chassis and then switch OFF the transmitter after playing.
Always remove all batteries when it is not used for a long time.
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards.
For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.