$13.10
BLHeli - S 13A DSHOT Brushless ESC for XR13A FPV RC Drone - Multi
Coupon:
Promotion:
Support COD payment Warehouse & Fee
SelectCN-099:Ship between: Feb 02 - Feb 04
Product Options
SelectMulti
Discussion
View More
How to choose a drone's memory card? 
We will give you the secret password in memory card, so that you can solve the secret seal of high quality video: The ultimate guide to choosing a drone's memory card Description
Main Features
1. Using the powerful US Siliconlabs EFM8BB21F16G MCU, the frequency is up to 48MHz
2. Dedicated high-speed drive IC makes the start-up more quick. The ESC supports up to 500,000 rpm
3. BLHeli-S firmware, it can be upgraded via signal cable online, enhancing the performance of RC drone, PWM improves smooth throttle response and reduces noise
4. Damped light will generate regenerative braking, which makes the efficiency higher. When the throttle changes from large to small, the motor decelerates more quickly and the multi-rotor is stable
5. Support higher KV motor, more powerful load, suitable for violent flight of racing multi-rotor
6. If you use the flight control of CleanFlight or BetaFlight firmware, you can directly use the flight controller link BLHeli debugging software to set four ESCs at a time
7. ESC power-on automatically detects the throttle signal, supports pulse width input of 1-2ms in normal PWM throttle mode, Oneshot and Multishot
8. Support Dshot150, Dshot300 and Dshot600. Dshot is a digital signal with strong anti-interference ability, and the ESC does not need to calibrate the throttle line
9. The signal line is a twisted-pair silicone cable, which increases its service life and more effectively reduces the interference caused by the transmission of signals in the copper wire, making the flight more stable
Specifications
Model: XR-13A
Continuous current: 13A
Peak current: 15A
Input voltage: 2-4s lipo
Support: Dshot600/ 300/150, PWM, Oneshot125/42, Multishot, Damped Mode
1. Using the powerful US Siliconlabs EFM8BB21F16G MCU, the frequency is up to 48MHz
2. Dedicated high-speed drive IC makes the start-up more quick. The ESC supports up to 500,000 rpm
3. BLHeli-S firmware, it can be upgraded via signal cable online, enhancing the performance of RC drone, PWM improves smooth throttle response and reduces noise
4. Damped light will generate regenerative braking, which makes the efficiency higher. When the throttle changes from large to small, the motor decelerates more quickly and the multi-rotor is stable
5. Support higher KV motor, more powerful load, suitable for violent flight of racing multi-rotor
6. If you use the flight control of CleanFlight or BetaFlight firmware, you can directly use the flight controller link BLHeli debugging software to set four ESCs at a time
7. ESC power-on automatically detects the throttle signal, supports pulse width input of 1-2ms in normal PWM throttle mode, Oneshot and Multishot
8. Support Dshot150, Dshot300 and Dshot600. Dshot is a digital signal with strong anti-interference ability, and the ESC does not need to calibrate the throttle line
9. The signal line is a twisted-pair silicone cable, which increases its service life and more effectively reduces the interference caused by the transmission of signals in the copper wire, making the flight more stable
Specifications
Model: XR-13A
Continuous current: 13A
Peak current: 15A
Input voltage: 2-4s lipo
Support: Dshot600/ 300/150, PWM, Oneshot125/42, Multishot, Damped Mode
Specification
General | Type: ESC Compatible with: XR13A RC Drone |
|---|---|
Dimensions and Weight | Product weight: 0.0050 kg Package weight: 0.0350 kg Product size (L x W x H): 10.00 x 2.60 x 0.40 cm / 3.94 x 1.02 x 0.16 inches Package size (L x W x H): 12.00 x 5.00 x 5.00 cm / 4.72 x 1.97 x 1.97 inches |
Package Contents | Package Contents: 1 x ESC |
Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
Small Parts Disclaimer:
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.
View More
Recommended Products
Sponsored Products
loading...
loading...
loading...
loading...