Can this motor be run continuous operation - what is the operating time?Hello KIEL,It can run continuously. The running time depends on other configuration and matching.
Maximum output power: 3250 Watts Maximum current: 85 A Input voltage: 4 - 12 S Maximum torque: 8 Nm Internal resistance: 0.05 Ohms Recommended ESC ( Electronic Governor ): 3 - 12S 50A FLIPSKY - VESC Benjamin ESC or FLIPSKY FSESC 6.6 Shaft: 8mm in diameter, 30mm in length, 3 x 1.5mm keyway Motor line: 130mm 12AWG silicone wire and 4.0mm banana head connector male. Wire configuration: blue = A, black = B, yellow = C Stator: 0.2mm Japanese imported silicon steel sheet Magnet: N42SH high temperature curve magnet Brushless Motor Not waterproof Sense motor Suitable for electric skateboards and electric bicycles, as well as underwater propellers and robots, large aircraft models can be used. Hall line: standard RC sensor wire JST - ZH 6pin 1.5mm pitch Internal PCB with 120 degrees Hall effect sensor The motor is suitable for both sense and non-inductance The motor is connected to the VESC and requires a 6-pin adapter cable. 2.0 female to 1.5-seat ESC sensor cable Wire configuration: red = 5V, white = Temp, blue = A, yellow = C, green = B, black = GND Suitable for 63mm motor bracket Common problem: 1. What type of screw is used to install the motor Install the motor with M4 x 8mm screws 2. Whether the motor is equipped with screws The motor is not equipped with screws
Dimensions and Weight
Product weight: 0.8600 kg Package weight: 1.0000 kg