Launch our Cool Free App!
Get $3 Off 1st Order.
1. Intelligent induction charger. The most advanced coil induction principle is adopted. After the mobile phone is put on, it will be charged to generate induction current. The left and right arms automatically clamp the mobile phone through the motor. When the mobile phone is fully clamped, the motor will automatically stop. This design makes the mobile phone very stable and will not sway or fall. The mobile phone can be easily removed by touching or lightly pressing the left or right buttons.
2. Built in energy storage capacitor. In the practical scenario, your mobile phone is put on the car for charging. When you stop and turn off the car, the charger is also powered off at the same time.
3. The low-power scheme has a high safety factor with capacitance. When the vehicle is powered off, there can be 10-15 times of bounce off. When the vehicle is powered off for half an hour, there can also be about 10 times of bounce off. Suitable for the high temperature environment in the vehicle.
4. When the car is powered off, you can easily remove the phone by touching or lightly pressing the left or right buttons.
5. intelligent touch and press buttons on two sides. You can turn it on or off by touching it with your hand, or you can turn it on or off by pressing the button inside. With gloves, you can use buttons to open.
6. Output power: 5W 7.5W 10W 15W, (the scheme that can support 15W must have high voltage components to withstand high power. 1130 MOS tube is adopted, with high voltage withstand, low temperature and fast charging. CBB capacitor is used as output capacitor, with low heating)
7. Front and back convection ventilation. Use the latest design concept, use the convection hole design to achieve physical cooling. There are air inlets behind the vehicle, and a row of invisible air outlets around the product surface.
9. Non slip rubber button slot. The left arm, the right arm and the lower bracket hook are all pasted with anti-skid silica gel, which can have effective anti falling, anti vibration, anti noise and anti-jamming effect. What's more humanized is that the there are respectively a vertical groove on the silica gel of the left arm and the right arm, will not get stuck to the buttons of the mobile phone, and the product can adapt to more mobile phones.
10. The lower bracket is adjustable. It is suitable for mobile phones of different sizes (due to the requirements of wireless charging on transmitter and receiver, the closer the point-to-point distance is, the better the charging effect is. On the contrary, the farther the point-to-point distance is, the worse the charging effect is, the heat will be generated, the power will be cut off, and the power will not be charged. Therefore, the lower bracket of our product is equipped with retractable gears, which are compatible with different sizes of hands Machine, very user-friendly)
11. Built in mute motor, low sound, long service life.
12. The suction cup is retractable, and you can choose from multiple directions. The polyurethane glued bottom is sticky enough and can be recycled. Use PVC as suction cup. Using ABS material as joint rod.
13. The air outlet clamp is spring clamp type, which can be clamped at the air outlet, suitable for 99% of the vehicle types, and the clamp is very tight.
14. Ultra thin design.
15. Adopting imported XT chip, stable quality.
Input: 5.0V/2.0A 9.0V/1.8A 12.0V/2.1A
Output: 5W, 7.5W, 10W, 15W
Charging distance: 2-8mm
Conversion frequency: ≥ 73%
Charging frequency: 110-205 kHz
Executive standard: Qi wireless charging standard
Compatibility: receivers compatible with all Qi standards
Product size: width 7.2cm x height 11.8cm/2.83 x 4.65" (folded size)
width 9.5cm x height 12.8cm/3.74 x 5.04" (unfolded size)
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.